Equipment operator Jobs

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Activities Live an extraordinary and unique adventure within a large industrial group, the agility and autonomy of an SME. Type of Contract: Local Permanent Contract. Your role The Industrial Maintenance &amp; New Works Technician maintains, repairs, revises, and modifies electronic and electrical equipment. He must demonstrate good technical knowledge but also be a good listener to understand the technical constraints encountered by his interlocutor. As an Industrial Maintenance &amp; New Works Technician, your responsibilities will be as follows*:</p><p>Ensure preventive and corrective maintenance of industrial equipment; Reduce machine downtime; Fill in intervention reports and ensure equipment monitoring; Guarantee the reliability and safety of equipment in compliance with safety, quality, and environmental rules; Contribute to the optimization of maintenance costs and continuous improvement of installations; Carry out preventive and corrective maintenance interventions on industrial equipment; Diagnose breakdowns and propose appropriate solutions; Perform adjustments, repairs, and replacements of defective parts; Participate in the installation and commissioning of new machines; Supervise on-site interveners; Check the proper functioning of machines after intervention; Comply with safety standards and internal procedures; Contribute to the continuous improvement of maintenance processes; Ensure the tidiness and cleanliness of the maintenance workshop.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Be from a Bac+2 level of education or higher;</li><li>Having 5 years of experience in a similar position;</li><li>Mastery of the French language, both written and spoken;</li><li>Mastery of diagnostic and measurement tools;</li><li>Technical versatility (electricity, mechanics, hydraulics, and automation);</li><li>Ability to read and interpret electrical and mechanical diagrams;</li><li>Ability to work in a team and communicate effectively;</li><li>Driving license required</li></ul><p>Your interpersonal skills, your curiosity, as well as your ability to be proactive and oriented towards innovation will allow you to successfully carry out your missions and thrive in this position.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Activities Live an extraordinary and unique adventure within a large industrial group. The agility and autonomy of an SME. Contract Type: Local Permanent Contract. Your role: The Industrial Maintenance &amp; New Works Technician maintains, repairs, revises, and modifies electronic and electrical equipment. He must have good technical knowledge but also be a good listener to understand the technical constraints encountered by his interlocutor. As an Industrial Maintenance &amp; New Works Technician, your responsibilities will be the following*: Ensure preventive and corrective maintenance of industrial equipment; Reduce machine downtime; Fill in intervention reports and ensure equipment monitoring; Guarantee the reliability and safety of equipment by respecting safety, quality, and environmental rules; Contribute to the optimization of maintenance costs and continuous improvement of installations; Carry out preventive and corrective maintenance interventions on industrial equipment; Diagnose breakdowns and propose appropriate solutions; Perform adjustments, repairs, and replacements of defective parts; Participate in the installation and commissioning of new machines; Supervise on-site interveners; Check the proper functioning of machines after intervention; Comply with safety standards and internal procedures; Contribute to the continuous improvement of maintenance processes; Ensure the tidiness and cleanliness of the maintenance workshop.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Required skills and knowledge: Must have a Bac+2 education or higher; Have 5 years of experience in a similar position; Mastery of the French language, both written and oral; Mastery of diagnostic and measurement tools; Possess technical versatility (electricity, mechanics, hydraulics, and automation); Ability to read and interpret electrical and mechanical diagrams; Ability to work in a team and communicate effectively; Driving license required. Your interpersonal skills, your curiosity, as well as your ability to be proactive and innovation-oriented will allow you to successfully carry out your missions and thrive in this position.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display advanced ability to read standard blue prints and electrical schematics concerning plumbing and HVAC. Display above average engineering operations skills and strong general mechanical ability. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Troubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TV's. Use the Lockout/Tagout system before performing any maintenance work. Display advanced knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers as necessary. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Education: High school diploma or G.E.D. equivalent and vocational or technical background.</li><li>Related Work Experience: Extensive experience and training in general maintenance, electrical or refrigeration, parts inventory and requisition, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience.</li><li>Supervisory Experience: No supervisory experience.</li><li>License or Certification: Valid Driver s License</li></ul><p>REQUIRED QUALIFICATIONS</p><ul><li>Universal Chlorofluorocarbon (CFC) Certification</li><li>Must meet applicable state and federal certification and/or licensing requirements.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job : <p>Ensure compliance with QHSE requirements:<br>•Participate in identifying and assessing risks in your work area<br>•Follow the prescribed preventive measures and protections<br>•Apply standards in every action<br>Operate the STG1 station according to QHSE standards:<br>•Prepare your workstation and be aware of operating instructions<br>•Monitor the operating parameters of the station and act appropriately to<br>anticipate any incidents affecting station performance, product quality, energy consumption, and<br>HSE performance<br>•Take samples, send them to the laboratory, analyze the results, and act accordingly<br>•Ensure the smooth running of STG1 station operations: preparation of melting, evaporation, crystallization,<br>and drying and cooling<br>•Give instructions to the turbine operator to adjust the turbine flow rate based on production pace<br>•Prepare the end-of-shift report (safety, process, maintenance) and fill in quality records<br>Monitor the proper functioning of STG1 installation equipment:<br>•Perform rounds to check the operating status of STG1 station equipment<br>•Perform N1 maintenance tasks on STG1 station equipment<br>•Supervise maintenance work during the annual shutdown<br>Configure equipment according to operational needs and management instructions:<br>•Start up/shut down the STG1 station<br>•Operate the batch cooker manually in case of regulation failure<br>•Perform basic cleaning of evaporators if necessary (cleaning standard)<br>•Ensure cleaning operations: melters, dissolvers, dryer, cooler, etc.<br>Participate in continuous improvement projects<br>•Propose improvement actions and implement validated actions</p><br><br> <br> Required profile : <p>Technical skills:<br>•Process operation<br>•Inspection<br>•Metrology of measurement and testing equipment<br>•Mechanical maintenance<br>•Electrical maintenance<br>•Automation<br>•Mastery of standards<br>•Knowledge of regulations<br>Transversal skills:<br>•Communication<br>•Problem-solving methods<br>•Analytical and synthesis skills<br>Behavioral skills:<br>•Customer focus<br>•Initiative/innovation<br>•Results-oriented<br>•Persuasion and influence<br>•Adaptability / Flexibility<br>•Team spirit</p><br><br> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company culture : <p><strong>Cosumar</strong> is characterized by a corporate culture centered on <strong>collaboration</strong>, where human relationships, teamwork and employee support play an important role. This collaborative approach is reinforced by a strong <strong>organizational</strong> dimension, ensuring rigor, efficiency and process reliability. The company also values <strong>performance</strong> and goal achievement, while maintaining openness to <strong>innovation</strong> and continuous improvement. This balance fosters a structured, people-oriented and progress-driven work environment. </p><br><br> <br> Job : <p>Join a dynamic company in the Agri-food sector as a <strong>PROCESS TECHNICIAN</strong> at one of our sites located in the <strong>Loukkos</strong> region. This is a unique opportunity to actively contribute to production processes in a stimulating environment.</p><br><br><p>Your role will be essential in optimizing manufacturing processes, ensuring product compliance, and adhering to safety standards. The goal is to guarantee efficient, high-quality production.</p><br><br><p>Your main tasks will include:</p><br><br><p>Ensuring maintenance of technological equipment:<br>• Prepare the maintenance program considering the pre-established maintenance plan and analysis of<br>past breakdowns during the campaign<br>• Open, dismantle, and diagnose equipment and establish the list of spare parts needed for interventions<br>• Check the availability of spare parts in coordination with the storekeeper and act accordingly<br>• Ensure the maintenance program is carried out within the deadlines<br>• Propose improvement actions to the line manager and implement validated actions<br>• Support external service providers in carrying out outsourced maintenance work<br>• Prepare the weekly progress report of the work and send it to the line manager<br>Perform and/or participate in tests:<br>• Participate in mechanical tests of equipment and ensure work is done to remove reservations made by the testing committee<br>• Perform hot tests of the station, check interlocks, and correct any malfunctions<br>Campaign:<br>Configure the station's equipment according to operational requirements and management instructions<br>• Prepare and commission the station's equipment in coordination with the power plant and the distribution station<br>Operate the drying and pelletizing station:<br>• Prepare your workstation and familiarize yourself with operating and maintenance instructions<br>• Monitor the process parameters and act appropriately<br>• Consult laboratory analysis results and act accordingly<br>• Start and monitor the cleaning operation of the relevant machines.<br>• Complete tracking forms<br>• Inform management of any significant events related to the station's operation<br>• At the end of the campaign, clean and preserve the equipment<br>Monitor the proper functioning of equipment:<br>Perform rounds to check the proper functioning of equipment and notify the relevant maintenance department in case of malfunction<br>• Monitor the smooth running of the packaging operation<br>• Perform maintenance tasks that are your responsibility (lubrication, oil level, etc.)<br>Prevent HSE risks in your activities:<br>• Participate in identifying risks in your work area<br>• Observe prescribed precautions and protections<br>• Apply standards in every action<br>Participate in continuous improvement projects:<br>• Ensure optimization and achievement of energy consumption objectives<br>• Conduct briefing and debriefing meetings with the line manager<br>• Propose improvement actions to the line manager for validation and implement validated actions </p><br><br> <br> <br> Required profile : <p>You have a Bac+2/3 level education in process engineering, electromechanics, or equivalent.</p><br><br><p>Internship experience in a similar role is required, ideally in the agri-food sector or heavy industry.</p><br><br><p>If you see yourself in this profile and are ready to take on this challenge, do not hesitate to apply quickly using the button "Send my CV to the recruiter" below.</p><br><br> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company culture : <p><strong>Cosumar</strong> is characterized by a corporate culture centered on <strong>collaboration</strong>, where human relationships, teamwork and employee support play an important role. This collaborative approach is reinforced by a strong <strong>organizational</strong> dimension, ensuring rigor, efficiency and process reliability. The company also values <strong>performance</strong> and goal achievement, while maintaining openness to <strong>innovation</strong> and continuous improvement. This balance fosters a structured, people-oriented and progress-driven work environment. </p><br><br> <br> Job : <p>Join a dynamic company in the <strong>Agri-food</strong> sector as a <strong>MANUFACTURING TECHNICIAN</strong> at one of our sites located in the <strong>Gharb</strong> region. This is a unique opportunity to actively contribute to production processes in a stimulating environment.</p><br><br><p>Your role will be essential in optimizing manufacturing processes, ensuring product compliance, and adhering to safety standards. The goal is to guarantee efficient, high-quality production.</p><br><br><p>Your main tasks will include:</p><br><br><ul><li> Ensure maintenance of technological equipment:<br>• Prepare the maintenance program considering the pre-established maintenance plan and the analysis of<br>past breakdowns during the campaign<br>• Proceed with the opening, dismantling, and diagnosis of equipment and establish the list of spare parts needed for interventions<br>• Check the availability of spare parts in coordination with the storekeeper and act accordingly<br>• Ensure the maintenance program is completed within the set deadlines<br>• Propose improvement actions to the line manager and implement validated actions<br>• Support external service providers in carrying out outsourced maintenance work<br>• Prepare the weekly progress report of work and send it to the line manager<br> Perform and/or participate in tests:<br>• Participate in mechanical tests of equipment and ensure work is done to clear issues identified by the testing committee<br>• Perform hot tests of the station, check interlocks, and fix any malfunctions<br> Campaign:<br> Configure station equipment according to operating requirements and management instructions<br>• Prepare and commission station equipment in coordination with the power plant and the distribution station<br> Operate the drying and pelletizing station:<br>• Prepare your workstation and familiarize yourself with operating and maintenance instructions<br>• Monitor the evolution of process operating parameters and act appropriately<br>• Consult laboratory analysis results and act accordingly<br>• Start and monitor the cleaning operation of the relevant machines.<br>• Complete tracking forms<br>• Inform management of any significant events related to the station's operation<br>• At the end of the campaign, clean and preserve the equipment<br> Monitor the proper functioning of equipment:</li><li>Perform rounds to check the proper functioning of equipment and notify the relevant maintenance department in case of malfunction<br>• Monitor the smooth running of the packaging operation<br>• Perform maintenance tasks that fall under your responsibility (greasing, oil level, etc.)<br> Prevent HSE risks in carrying out your activities:<br>• Participate in identifying risks in your work area<br>• Observe prescribed precautions and protections<br>• Apply standards in every action<br> Participate in continuous improvement projects:<br>• Ensure optimization and achievement of energy consumption targets<br>• Conduct briefing and debriefing meetings with the line manager<br>• Propose improvement actions to the line manager for validation and implement the validated actions&nbsp;</li></ul> <br> <br> Required profile : <p>You have a <strong>Bac+2/3</strong> level education (equivalent to an Associate's or Bachelor's degree) in process engineering, electromechanics, or equivalent.</p><br><br><p>Experience as an intern in a similar role is required, ideally in the agri-food sector or heavy industry.</p><br><br><p>If you see yourself in this profile and are ready to take on this challenge, do not hesitate to apply quickly using the "Send my CV to the recruiter" button below.</p><br><br> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job : <p>• Operate the boiler room: <br>• Prepare the workstation and follow operating and maintenance instructions<br>• Monitor the operating parameters of the station and act appropriately<br>• Follow laboratory analysis results and act accordingly<br>• Complete the daily shift report and fill out tracking sheets<br>• Ensure the evacuation of residues (dust, ash) from coal boilers<br>• Report any significant event related to the station's operation to the supervisor in a timely manner<br>• Monitor the stock of boiler consumables (coal, fuel, chemicals) and act as needed<br>• Apply and participate in the development of operational standards<br>• Start the water production/treatment station if necessary*<br>• Perform systematic chimney sweeping operations*<br> Monitor the proper functioning of equipment:<br>• Perform rounds to check the proper functioning of equipment and act accordingly<br>• Prepare equipment for maintenance interventions and assist with risky interventions<br>• Participate in the development of the list of maintenance work to be done (daily, annual shutdown) and transmit it to the shift leader<br>• Supervise the execution of maintenance work during the shutdown (subcontractors, internal workshops)<br>• Execute the shutdown and startup schedule of the plant<br>• Perform systematic maintenance tasks under your responsibility (lubrication, oil level,<br>oil cooler cleaning, ..)**<br> Configure station equipment according to operating requirements and hierarchical instructions:<br>• Prepare and commission boilers<br>• In case of planned or unplanned shutdown, perform necessary palliative or curative maintenance tasks<br>**<br> Prevent HSE risks in the exercise of activities:<br>• Participate in identifying risks in the work area<br>• Apply QHSE standards and rules in every action<br> Participate in Group continuous improvement projects:<br>• Propose improvement actions within the scope of activity<br>• Participate in continuous improvement projects at the level of the reporting department<br>• Participate in cross-functional projects<br>Between campaigns (Sugar factories) **<br> Ensure the maintenance of boilers and associated equipment</p><br><br><p>• Prepare the maintenance program considering the pre-established maintenance plan and the analysis of the breakdown history during the campaign<br>• Proceed with opening, dismantling, and diagnosing equipment and establish the list of spare parts needed for interventions<br>• Check the availability of spare parts in coordination with the storekeeper and act accordingly<br>• Ensure the maintenance program is carried out within the allotted time<br>• Propose improvement actions to the supervisor and implement validated actions<br>• Support contractors in carrying out outsourced maintenance work (furnace work, safety valve calibration)<br>• Prepare the weekly progress report and send it to the supervisor<br> Participate in and/or perform tests:<br>• Participate in mechanical and control system tests of equipment and ensure work is carried out to remove reservations made by the testing committee<br>• Prepare and attend the hydraulic test carried out by the regulatory body<br>• Perform station startup tests and rectify any malfunctions<br>• Ensure steam availability for the plant's hot tests&nbsp;</p><br><br> <br> Required profile : <p>Conditions of access to the position:<br>• Education: Bac + 2 in Process Engineering/Electromechanics or equivalent.<br>• Experience: 0<br> Professional skills:<br>• Production / Energy Management<br>• Sugar extraction and refining techniques<br>• Mechanical maintenance<br>• Electrical maintenance,<br>• Automation, instrumentation, and control<br>• Maintenance management<br>• Operational standards&nbsp;</p><br><br> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company culture : <p><strong>Cosumar</strong> is characterized by a corporate culture centered on <strong>collaboration</strong>, where human relationships, teamwork and employee support play an important role. This collaborative approach is reinforced by a strong <strong>organizational</strong> dimension, ensuring rigor, efficiency and process reliability. The company also values <strong>performance</strong> and goal achievement, while maintaining openness to <strong>innovation</strong> and continuous improvement. This balance fosters a structured, people-oriented and progress-driven work environment. </p><br><br> <br> Job : <p>Join a dynamic company in the Agri-food sector as a MANUFACTURING TECHNICIAN at one of our sites located in the DOUKKALA region. This is a unique opportunity to actively contribute to production processes in a stimulating environment.</p><br><br><p>Your main tasks will include:</p><br><br><p>Ensure maintenance of technological equipment:<br>• Prepare the maintenance program taking into account the pre-established maintenance plan and the analysis of the breakdown history during the campaign<br>• Proceed with the opening, dismantling, and diagnosis of equipment and establish the list of spare parts (PDR) needed for interventions<br>• Check the availability of spare parts in coordination with the storekeeper and act accordingly<br>• Ensure the maintenance program is carried out within the deadlines<br>• Propose improvement actions to the line manager and implement validated actions<br>• Support service providers in carrying out outsourced maintenance work<br>• Prepare the weekly progress report of the work and send it to the line manager</p><br><br><p>• Participate in mechanical tests of equipment and ensure the work is carried out to remove reservations made by the testing commission</p><br><br><p>• Perform hot tests of the station, check interlocks, and remedy any potential malfunctions<br>Campaign:<br>Configure the station's equipment according to operating requirements and management instructions<br>• Prepare and commission the station's equipment in coordination with the power plant and the<br>distribution station<br>Operate the drying and pelletizing station:<br>• Prepare your workstation and familiarize yourself with operating and maintenance instructions<br>• Monitor the progress of the process parameters and act appropriately<br>• Consult laboratory analysis results and act accordingly<br>• Start and monitor the cleaning operation of the relevant machines.<br>• Fill out tracking sheets<br>• Inform management of any significant event related to the station's operation<br>• At the end of the campaign, clean and maintain the equipment<br>Monitor the proper functioning of equipment:<br>Perform rounds to check the proper functioning of equipment and notify the relevant maintenance department in case of malfunction<br>• Monitor the proper progress of the packaging operation<br>• Perform maintenance tasks within your responsibility (greasing, oil level, etc.)<br>Prevent HSE risks in your activities:<br>• Participate in identifying risks in your work area<br>• Observe prescribed precautions and protections<br>• Apply standards in every action<br>Participate in continuous improvement projects:<br>• Ensure the optimization and achievement of energy consumption objectives<br>• Conduct briefing and debriefing meetings with the line manager<br>• Propose improvement actions to the line manager for validation and implement validated actions </p><br><br> <br> <br> Required profile : <p>You have a Bac+2/3 level education in process engineering, electromechanics, or equivalent.</p><br><br><p>Experience as an intern in a similar role is required, ideally in the agri-food sector or heavy industry.</p><br><br><p>If you see yourself in this profile and are ready to take on this challenge, do not hesitate to apply quickly using the button "Send my CV to the recruiter" below.</p><br><br> <br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><font dir="auto" ><font dir="auto" >The ITPL support team manages and optimizes the integration and validation plan for test equipment for vehicle projects (derived silhouette, re-engining, series production, mid-life) as well as for modules. Its role focuses on building the PIV (Project Integration Plan), managing the equipment fleet, and monitoring KPIs (Key Performance Indicators).</font></font></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><font dir="auto" ><font dir="auto" >Master's degree (Bac + 5) in industrial/mechanical engineering</font></font></li><li><font dir="auto" ><font dir="auto" >0 to 1 year of experience</font></font></li><li><font dir="auto" ><font dir="auto" >Proficiency in Excel/BI is a plus</font></font></li><li><font dir="auto" ><font dir="auto" >Problem solving</font></font></li><li><font dir="auto" ><font dir="auto" >Good posture</font></font></li><li><font dir="auto" ><font dir="auto" >Excellent communication</font></font></li><li><font dir="auto" ><font dir="auto" >English / French</font></font></li><li><font dir="auto" ><font dir="auto" >Coordination</font></font></li><li><font dir="auto" ><font dir="auto" >Result orientation</font></font></li><li><font dir="auto" ><font dir="auto" >Flexibility</font></font></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><font dir="auto" ><font dir="auto" >Creates and reviews test technology local work instructions Supports: - test equipment and test tools development (design, test modules, specific processes, etc.) - technical error analyzes for customer claims and complaints - the identification of root causes in case of process disturbances and searching for solutions Creates and develops the test sequences and programs according to requirements - for building of test tables, test boards and vision tests, internally or externally - for installation and validation of test equipment - in order to change the test programs, test tables, test boards and vision systems during product changes and new introduction (Change Management &amp; Project Management) Ensures test programs and test parameters used during initial setup Provides feedback to Production Technology related to test modules functionality and design Ensures backup of test programs and test parameters Implements lessons learned, best practice and actively shares the information within the Production Management network</font></font></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><font dir="auto" ><font dir="auto" >Bachelor s degree (2 or 3 years) in Mechanical Engineering or Industrialization/Methods.</font></font></p><p></p></section>

<p>STMicroelectronics is convinced that technology is a driver of innovation and has a positive impact on businesses, people and society. As a global player in semiconductors, our cutting-edge technologies and electronic components are invisible but at the heart of today's world. Joining ST means joining an international company with over 115 nationalities, present in 40 countries, and bringing together more than 50,000 passionate and committed talents, all united by the desire to create and invent the technology of tomorrow. Innovation requires more than just technical skills: it requires inspiring people who can collaborate with respect and enthusiasm. Employees driven by passion, ready to challenge the status quo, drive innovation and reveal their full potential. Come live this adventure with us and contribute to building a smarter and more sustainable future, combining responsibility and innovation. Our technology starts with you.</p><p>2 Operators on Shift B</p><p>1 Operator on C</p><p>1 Operator on D</p><p>Responsibilities</p><ul><li>Operate and monitor production machinery following safety and quality standards.</li><li>Perform routine equipment inspections and report issues.</li><li>Load/unload materials and document production data.</li><li>Maintain a clean, organized workspace.</li><li>Collaborate with team to meet production goals.</li><li>Follow health and safety regulations.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>High school diploma or equivalent.</li><li>Experience in manufacturing preferred.</li><li>Basic mechanical skills and attention to detail.</li><li>Physical ability to handle repetitive tasks and moderate lifting.</li><li>Strong safety awareness and communication skills.</li><li>Ability to work in a team and adapt to shift schedules.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company culture : <p><strong>Cosumar</strong> is characterized by a corporate culture centered on <strong>collaboration</strong>, where human relationships, teamwork and employee support play an important role. This collaborative approach is reinforced by a strong <strong>organizational</strong> dimension, ensuring rigor, efficiency and process reliability. The company also values <strong>performance</strong> and goal achievement, while maintaining openness to <strong>innovation</strong> and continuous improvement. This balance fosters a structured, people-oriented and progress-driven work environment. </p><br><br> <br> Job : <p>Join a dynamic company in the <strong>agri-food</strong> sector and bring your expertise as a <strong>Laboratory Technician</strong> to our establishment located in <strong>Ksar El Kébir</strong>. This is a unique opportunity to grow in a stimulating environment.</p><br><br><p>Your role will be to ensure laboratory analyses are carried out and results are communicated on time.</p><br><br><p>Your main tasks will include:</p><br><br><p>• Between campaigns:<br>• Perform inventory of laboratory chemicals and equipment<br>• Define the need for equipment and chemicals necessary for the campaign and prepare special purchase orders (CPS)<br>• Prepare solutions of chemicals needed for analyses<br>• Assist with the annual calibration of measuring instruments by external companies<br>During campaign:<br>Perform sampling of operating products according to the laboratory control plan<br>• Perform necessary analyses, display results for users, and report anomalies<br>• Document the daily analysis reports<br>• Verify and monitor corrective actions taken by operators<br>• Monitor the proper functioning of laboratory measuring instruments by checking and taking action accordingly•<br>Participate in the preparation of the daily summary<br>Packaging:<br>• Check maturation (for molded products)<br>• Check the quality of finished products before release<br>• Establish the daily status of the packaging sector<br>Reception control:<br>• Check the conformity of chemicals, energy products, and packaging materials upon reception<br>Prevent QHSE risks in carrying out your activities:<br>• Ensure compliance with the requirements of the ISO 17025 standard Contract farmers<br>• Participate in risk identification in your area<br>• Observe prescribed precautions and protections<br>• Apply QSE standards in every action<br>Participate in continuous improvement projects:<br>• Propose improvement actions to the hierarchical manager for validation and implement validated actions<br>&nbsp;</p><br><br> <br> <br> Required profile : <p>You have a Bac+2/3 level education in process engineering, chemistry, biology, agri-food technology.</p><br><br><p>Experience as an intern in a similar role is required, ideally in the agri-food sector or heavy industry.</p><br><br><p>If you see yourself in this profile and are ready to take on this challenge, do not hesitate to apply quickly using the button "Send my CV to the recruiter" below.</p><br><br> <br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Responsibilities :</p><p>Ensure the commissioning, training, and clinical assistance on resuscitation equipment, particularly ventilators, monitors, and patient monitoring systems.</p><p>Conduct demonstrations and workshops (WS) in resuscitation and intensive care units, in collaboration with medical and technical teams.</p><p>Provide high-level technical and application support to ensure optimal use of devices and user satisfaction.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Profile :</p><p>Education :</p><p>Biomedical engineer, senior technician in biomedical, or equivalent training in the field of medical devices.</p><p>Experience :</p><p>Minimum 4-6 years of experience in an application or clinical support role, ideally in resuscitation or intensive care.</p><p>Technical Skills :</p><p>Proficiency in ventilators, monitoring systems, and resuscitation equipment.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Description of the company and the position: As part of our client's development, we are looking for an Application Specialist (Operating Room):</p><p>Responsibilities:</p><ul><li>Ensure the setup, training, and clinical assistance on operating room equipment.</li><li>Conduct demonstrations and workshops (WS) within operating rooms, in collaboration with medical, paramedical, and technical teams.</li><li>Provide high-level technical and application support to ensure optimal use of devices and user satisfaction.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Profile:</p><p>Training:</p><ul><li>Biomedical engineer, senior biomedical technician, or equivalent training in the field of medical devices.</li></ul><p>Experience:</p><ul><li>Minimum 4-6 years of experience in an application or clinical support role, ideally in an operating room.</li></ul><p>Technical Skills:</p><ul><li>Mastery of operating room equipment, surgical visualization systems, and associated medical devices.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company culture : <p><strong>Cosumar</strong> is characterized by a corporate culture centered on <strong>collaboration</strong>, where human relationships, teamwork and employee support play an important role. This collaborative approach is reinforced by a strong <strong>organizational</strong> dimension, ensuring rigor, efficiency and process reliability. The company also values <strong>performance</strong> and goal achievement, while maintaining openness to <strong>innovation</strong> and continuous improvement. This balance fosters a structured, people-oriented and progress-driven work environment. </p><br><br> <br> Job : <p>Join a major player in the <strong>agri-food</strong> sector as a <strong>Mechanical Maintenance Technician</strong>. It is in <strong>Sidi Bennour</strong> that your expertise will be used to ensure the proper functioning of our facilities. A unique opportunity to grow within a dynamic company.</p><br><br><p>Your role will be crucial in carrying out maintenance of mechanical equipment in the factory while respecting the quality, health, safety, environment, and energy efficiency (QHSEEn) rules in force.</p><br><br><ul><li>I Perform maintenance on mechanical equipment in accordance with QHSEEn requirements:</li><li>• Carry out mechanical maintenance tasks according to the preventive maintenance plan (PMP)</li><li>• Participate in the diagnosis of mechanical equipment to locate the causes of breakdowns</li><li>• Carry out necessary corrective maintenance interventions</li><li>• Fill in the technical intervention sheets to build the maintenance file</li><li>• Assist contractors in carrying out their maintenance work</li><li>• Prepare equipment and assist with the start-up of the factory and act in case of malfunction</li><li>• Prepare the report of interventions carried out (internal and subcontracted) during the shift and transmit it to the line manager</li><li>• Carry out rounds to check the proper functioning of mechanical equipment</li><li>• Attend the sector meeting</li><li>• Apply and participate in the development of operational standards</li><li> Prevent QHSEEn risks in the exercise of its activities:</li><li>• Participate in identifying risks in your work area</li><li>• Apply QHSEEn standards and rules in each action</li><li> Participate in continuous improvement projects:</li><li>• Propose improvement actions within your scope of activity</li><li>• Participate in continuous improvement projects at your department level</li><li>Participate in cross-functional projects</li></ul> <br> <br> Required profile : <p>You have a Bac+2/3 level education in mechanics, industrial maintenance, or equivalent.</p><br><br><p>Experience as an intern in a similar position is required, ideally in the agri-food sector or a heavy industry.</p><br><br><p>If you recognize yourself in this profile and are ready to take on this challenge, do not hesitate to apply quickly using the "Send my CV to the recruiter" button below.</p><br><br> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> <p> Ce que nos collaborateurs aiment le plus chez nous <span>❤</span> : Pour consulter leurs avis certifiés </p><br><br> <br> <br> Job : <p>As part of our development and to meet the growing needs in radio design, we are looking for an Indoor and Outdoor Radio Network Design Engineer (4G/5G).<br>You will be responsible for designing radio networks for complex environments (dense areas, smart cities, shopping centers, stadiums, airports, office buildings, etc.).</p><br><br><p>Your tasks include:</p><br><br><p>• Understanding specific client requirements for coverage and capacity.<br>• Developing radio designs on iBwave/Atoll to ensure optimal coverage.<br>• Performing propagation simulations, link budgets, and performance analyses.<br>• Selecting appropriate network equipment based on project requirements and mobile technologies (3G, 4G, 5G, WiFi, etc.).<br>• Ensuring compliance with technical specifications and regulatory standards.<br>• Supporting project managers to best meet client needs.<br>&nbsp;</p><br><br> <br> Required profile : <p>You have an engineering degree in Networks &amp; Telecoms with initial experience in radio design and planning. You have previously worked in an operator or manufacturer environment.</p><br><br><p>The expected technical skills are:</p><br><br><p>• Knowledge of 4G and 5G RAN technologies, indoor systems (BTS Hotel, DAS systems, small cells, etc.), and Wifi technologies.<br>• Knowledge of different components of the antenna chain.<br>• Experience in designing and modeling radio equipment.<br>• Knowledge of indoor and/or outdoor planning tools: iBwave, Atoll.<br>• Ability to convince different stakeholders of the relevance of the proposed solution.</p><br><br><p>Required qualities</p><br><br><p>• Excellent communication and teaching skills to present the proposed design.<br>• Analytical and synthesis skills to solve complex problems.<br>• Good writing skills<br>• Analytical and synthesis skills<br>&nbsp;</p><br><br> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job : <p><strong>GENERAL MISSION</strong></p><br><br><p>Reporting to the Support &amp; Facilities Management department, the ambulance driver is responsible for transporting individuals to healthcare facilities and providing an efficient and safe transportation service for individuals and/or delivering documents for the Rabat High School of Excellence.</p><br><br><p><strong>MAIN MISSIONS</strong></p><br><br><p>• Transport patients to healthcare facilities (affiliated hospitals and clinics, laboratories, etc.) as needed, while maintaining the ambulance logbook;<br>• Administer first aid when necessary;<br>• Drive the ambulance safely and efficiently in emergency situations, respecting emergency protocols;<br>• Ensure the ambulance is operational (fuel level, tire condition, etc.) and that all necessary documents are available and compliant (insurance, etc.);<br>• Regularly check the proper functioning of the onboard medical equipment and report any potential malfunction or need for repair to management;<br>• Assist with patient mobility using appropriate techniques to prevent any worsening of their condition;<br>• Position the patient in the ambulance according to medical recommendations and provide assistance if needed;<br>• Use transfer equipment (stretchers, transfer chairs) safely;<br>• Ensure the regular cleanliness and disinfection of the ambulance and onboard medical equipment.<br>• Communicate effectively with staff for optimal coordination of trips;<br>• Drive individuals safely and responsibly between different sites and destinations according to instructions from supervisors;<br>&nbsp;</p><br><br> <br> Required profile : <p><strong>PROFILE</strong></p><br><br><p>• Hold professional training in the ambulance driver profession or equivalent.<br>• Have previous experience as an ambulance driver.<br>• Hold a first aid training certificate.<br>• Possess a category B driver's license.</p><br><br><p><strong>SKILLS</strong></p><br><br><p>• Driving an Ambulance Vehicle<br>• First Aid and Emergency Care<br>• Patient Mobility and Transfer<br>• Emergency Situation Management<br>• Ambulance Maintenance and Checks<br>• Communication and Coordination<br>• Stress Management<br>• Preventive Maintenance</p><br><br><p><strong>PERSONAL ATTRIBUTES</strong></p><br><br><p>• Calm and Composed<br>• Caring<br>• Sense of Responsibility<br>• Discretion<br>• Reactivity<br>• Physical Endurance<br>&nbsp;</p><br><br> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Why join Aptiv? You'll have the opportunity to work on cutting-edge applications, develop breakthrough technologies, and deliver innovative solutions to some of the world’s leading automotive brands. See your work come to life on the road—helping make mobility safer, greener, and more connected. Ready to shape the future of mobility with us?</p><br><p>We are currently looking for a Process Engineer</p><br><ul><li><b>Process Development &amp; optimization :</b><ul><li>Design, validate and implement automated testing system and vision inspection systems for manufacturing Lines.</li><li>Develop testing methods for mechanical, electrical, or functional product validation.</li><li>Optimize Cycle time , accuracy and reliability of testing and vision process</li><li>Develop maintenance preventive maintenance Plans for testing and vision systems</li><li>Propose CI Projects</li></ul></li><li><b>Equipment Management &amp; Integration :</b><ul><li>Specify, select, and validate equipment and software for testing systems</li><li>Collaborate with equipment suppliers for integration of new testing and inspection systems.</li><li>Train production and quality team on Testin/vision equipment usage and troubleshooting</li></ul></li><li><b>Quality &amp; Compliance :</b><ul><li>Ensure that testing systems meet customer and internal requirement.</li><li>Support root cause analysis for quality issues related to Testing and vision system</li><li>Maintain traceability for inspection and testing data</li></ul></li></ul><p><b><u>Your Background:</u></b></p><br><ul><li><p>Bachelor’s or Master’s degree In electrical, Mechatronics, automation, Industrial or Mechanical engineering</p><br></li><li><p>Specific Background on Cutting Crimping Process will be an Additional Asset</p><br></li><li><p>2 years of experience in automotive sector.</p><br></li></ul><p><b><u>Aptiv Rewards &amp; Advantages:</u></b></p><br><ul><li><p>Competitive compensation package.</p><br></li><li><p>Learning, professional growth and development in a world recognized international environment.</p><br></li><li><p>Access to internal &amp; external training, coaching &amp; certifications.</p><br></li><li><p>Recognition for innovation and excellence.</p><br></li><li><p>Opportunities to give back to the community.</p><br></li><li><p>Meaningful work that makes a difference in the world</p><br></li></ul><p>#LI-PT1</p><br><p>Privacy Notice - Active Candidates: <span>https://www.aptiv.com/privacy-notice-active-candidates</span></p><br><p><span>Aptiv is an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, sex, gender identity, sexual orientation, disability status, protected veteran status or any other characteristic protected by law.</span></p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Description du poste<p>- Supports the development of new production equipment and processes, provides training and technical support to production in coordination with Country and Production Management teams<br></p><br><p>- Supports and applies planning, standardization and realization of Production Engineering activities (Change management, Equipment planning, creation and release of master data, method of manufacture, etc.)<br></p><br><p>- Ensures the implementation of the production concept and integration of new processes in plant in collaboration with Production Concept Team on country level<br></p><br><p>- Supports the definition and implementation of processes and material flows within the Assembly area line setup<br></p><br><p>- Ensures the creation and maintenance of manufacturing master data including but not limited to Material Requirements Planning (MRP), production drawings, bill of material, Manufacturing Execution Systems (MES) data, board designs, Failure Mode and Effects Analysis FMEA, etc.<br></p><br><p>- Creates, modifies and maintains all master data and documentation related to methods of manufacture (work instructions, visual aids, etc.) and ensures machine and operator instructions are present and up to date<br></p><br><p>- Evaluates and manages the implementation of new products and technical changes according to the process description Change Management according CP 2.2.2<br></p><br><p>- Ensures the validation and release of production equipment including but not limited to new material combinations, new tooling, lay-up boards, module boards, jigs, test tables, boards and work place or station layouts &amp; documents etc.</p><br><br><br>Qualifications et Expérience<p>- Bac +2/3, Bac +5 en génie mécanique ou industrialisation/méthodes, ou formation similaire.</p><br><br> </div>

<p>Supports the development of new production equipment and processes, provides training and technical support to production in coordination with Country and Production Management teams - Supports and applies planning, standardization and realization of Production Engineering activities (Change management, Equipment planning, creation and release of master data, method of manufacture, etc.) - Ensures the implementation of the production concept and integration of new processes in plant in collaboration with Production Concept Team on country level - Supports the definition and implementation of processes and material flows within the Assembly area line setup - Ensures the creation and maintenance of manufacturing master data including but not limited to Material Requirements Planning (MRP), production drawings, bill of material, Manufacturing Execution Systems (MES) data, board designs, Failure Mode and Effects Analysis FMEA, etc. - Creates, modifies and maintains all master data and documentation related to methods of manufacture (work instructions, visual aids, etc.) and ensures machine and operator instructions are present and up to date - Evaluates and manages the implementation of new products and technical changes according to the process description Change Management according CP 2.2.2 - Ensures the validation and release of production equipment including but not limited to new material combinations, new tooling, lay-up boards, module boards, jigs, test tables, boards and work place or station layouts &amp; documents etc.</p><p><strong>Desired Candidate Profile</strong></p><p>Qualifications et Exp rience - Bac +2/3, Bac +5 en g nie m canique ou industrialisation/m thodes, ou formation similaire.</p>