Mechanical Engineering Jobs in Morocco

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>You will contribute to the optimization of a Dry Pack machine through the automation of the door closing system at the TPAK FQC step. Your mission will focus on eliminating the operator s manual movement, improving ergonomics, and developing a simple, reliable, and automated door closing solution. You will work with the engineering and production teams to:</p><ul><li>Analyze the current Dry Pack machine operation at the FQC step</li><li>Identify opportunities to automate the door closing function</li><li>Study and propose an electrical, mechanical, or mechatronic solution</li><li>Participate in the design, integration, testing, and validation of the automated system</li><li>Support troubleshooting, performance evaluation, and technical documentation</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Student preparing an Engineering degree or Master s degree in Electrical Engineering, Automation, Mechatronics, Mechanical Engineering, or a related field</p><ul><li>Strong interest in industrial automation, machine optimization, and process improvement</li><li>Basic knowledge of:<ul><li>Electrical schematics</li><li>Sensors and actuators</li><li>Automation / control systems</li><li>Machine integration and industrial safety</li></ul></li><li>Analytical mindset with problem-solving skills</li><li>Ability to work in a multidisciplinary environment</li><li>Good communication skills and team spirit</li><li>English proficiency is a plus</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are Hiring Now - 5 positions - Engineers</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Electrical Site Engineer</p><p>Civil Site Engineer</p><p>Architect</p><p>Land Surveyor</p><p>Mechanical Engineer</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>AVL Maroc SARL AU offers a job in Morocco (MA) as</p> <b>Senior CAE Engineer (PhD preferred) - Structural Analysis (E-Axle Driveline)</b> <p> </p> <p> </p><p> </p> <p> </p> <p></p> <p> </p> <p> <b>YOUR RESPONSIBILITIES:</b> </p> <p> </p> <p> CAE Analysis &amp; Simulation <br></p><ul> <li>Develop, prepare and execute finite element models for the structural validation of e-axle, driveline and transmission components.</li> <li>Perform nonlinear static, contact and fatigue analyses on complex multi-body assemblies.</li> <li>Independently set up and validate:<br><ul> <li>Contact interactions across multiple component interfaces, including detailed tooth-to-tooth contact.</li> <li>Interference and press-fit conditions.</li> <li>Bolt pretension/preload modelling and bolted-joint safety assessments.</li> <li>Multi-Point Constraints (MPCs) and complete connectivity definitions.</li> <li>Internal and external gear meshing load simulations.</li> <li>Bearing-ring modelling and bearing-seat misalignment assessments.</li> </ul> </li> <li>Evaluate structural performance under multiple loading conditions, including external loads, gear meshing loads, actuation forces and transmitted torque.</li> </ul> Modelling &amp; Meshing <br><ul> <li>Create high-quality finite element meshes for complex cast and forged components using HyperMesh.</li> <li>Manage large-scale multi-body finite element assemblies.</li> <li>Ensure model quality, robustness and compliance with customer standards and best engineering practices.</li> </ul> Results Assessment &amp; Fatigue Evaluation <br><ul> <li>Analyse and interpret simulation results, including:<br><ul> <li>Signed Von Mises stresses.</li> <li>Displacements.</li> <li>Contact pressures.</li> <li>Contact status.</li> </ul> </li> <li>Perform fatigue safety-factor assessments using FEMFAT.</li> <li>Identify critical areas and provide engineering recommendations to improve component durability and structural integrity.</li> </ul> Reporting &amp; Customer Interface <br><ul> <li>Execute analyses according to customer calculation guidelines and recognised engineering best practices.</li> <li>Work autonomously using own hardware and software environment.</li> <li>Provide structured weekly progress reports detailing:<br><ul> <li>Activity status.</li> <li>Analysis progress.</li> <li>Hours spent per task.</li> <li>Project risks and mitigation actions.</li> </ul> </li> <li>Prepare professional PowerPoint reports including:<br><ul> <li>Model description.</li> <li>Boundary conditions.</li> <li>Material definitions.</li> <li>Connectivity setup.</li> <li>Load case overview.</li> <li>Results and conclusions.</li> </ul> </li> <li>Maintain full traceability of software versions, CAD revisions and calculation baselines.</li> <li>Collaborate directly with customer engineering teams and communicate technical findings effectively.</li> </ul> <p></p> <p> </p> <p> <b>YOUR PROFILE:</b> </p> <p> </p> <p> </p><ul> <li>PhD in Mechanical Engineering, Computational Mechanics, Structural Mechanics, Solid Mechanics or a related discipline preferred.</li> <li>Minimum requirement: MSc in Mechanical Engineering or equivalent with a specialization in CAE and Structural Analysis.</li> <li>Minimum 3 years of professional CAE / Structural FEA experience.</li> <li>5+ years preferred, with experience in:<br><ul> <li>Driveline systems.</li> <li>Powertrain components.</li> <li>Axles.</li> <li>Transmissions.</li> </ul> </li> <li>Experience in the automotive or heavy commercial vehicle industry is highly desirable.</li> <li>Proven experience in the structural validation of cast and forged components as well as bolted assemblies under static and fatigue loading conditions.</li> <li>Previous experience working as a CAE consultant or supplier to OEMs or Tier-1 companies is an advantage.</li> <li>Expert-level structural analysis experience with:<br><ul> <li>Abaqus 2024.</li> <li>PERMAS v20.</li> </ul> </li> <li>Proficiency with:<br><ul> <li>Altair HyperMesh 2024.1.</li> <li>FEMFAT 2024.1.</li> <li>Altair HyperView 2024.1.</li> </ul> </li> <li>Strong knowledge of:<br><ul> <li>Structural mechanics.</li> <li>Strength of materials.</li> <li>Fatigue theory and stress-life methodologies.</li> <li>Contact mechanics.</li> <li>Bolted-joint design and verification.</li> </ul> </li> <li>Good understanding of driveline architecture, differentials, bearings and gear systems.</li> <li>Professional proficiency in English (written and spoken) is mandatory.</li> <li>Italian is considered an advantage.</li> <li>Strong autonomy and ability to work independently.</li> <li>High level of accuracy and attention to detail.</li> <li>Strong analytical and problem-solving skills.</li> <li>Excellent communication and technical reporting abilities.</li> <li>Ownership mindset and commitment to delivering high-quality engineering work.</li> <li>Hands-on experience in e-axle or electrified driveline structural validation.</li> <li>Advanced hexa-dominant meshing expertise.</li> <li>PhD with publications in computational mechanics, contact mechanics or fatigue analysis.</li> <li>Scripting and automation skills (Python, Tcl/Tk) for model generation and post-processing.</li> </ul> <p></p> <p> </p> <p><br></p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><font dir="auto" ><font dir="auto" >Activities: Degree: Bachelor's or Master's in Industrial Engineering, Advanced Diploma in Mechanical Manufacturing or Technical Engineering. Experience: Minimum 3-5 years of experience in a similar role, with specific expertise in molding (plastic injection, compression molding, extrusion molding, etc.). Technical Knowledge: Familiarity with CAD/CAM software for mold design (CATIA, SolidWorks, etc.). Knowledge of electricity, hydraulics, pneumatics, and automation. Materials Knowledge: Expertise in polymers, rubber, metals, or other materials used in molding. Knowledge of thermoplastic molds and injection processes. Analytical Skills: Ability to analyze complex technical problems and propose viable solutions. Production Methodologies: Knowledge of Lean Manufacturing practices, Six Sigma, and continuous improvement tools. Microsoft Office</font></font></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><font dir="auto" ><font dir="auto" >Degree: Bachelor's or Master's degree in Industrial Engineering, Advanced Diploma in Mechanical Manufacturing or Technical Engineering. Experience: Minimum 3-5 years of experience in a similar role, with specific expertise in molding (plastic injection, compression molding, extrusion molding, etc.). Technical Knowledge: Familiarity with CAD/CAM software for mold design (CATIA, SolidWorks, etc.). Knowledge of electricity, hydraulics, pneumatics, and automation. Materials Knowledge: Expertise in polymers, rubber, metals, or other materials used in molding. Knowledge of thermoplastic molds and injection molding processes. Analytical Skills: Ability to analyze complex technical problems and propose viable solutions. Production Methodologies: Knowledge of Lean Manufacturing practices, Six Sigma, and continuous improvement tools. Microsoft Office</font></font></p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Degree: Bachelor's or Master's degree in industrial engineering, Advanced degree in mechanical manufacturing or technical engineering&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</p><p><br></p><p>Experience: Minimum 3 to 5 years of experience in a similar role, with specific expertise in molding (plastic injection, compression molding, extrusion molding, etc.)</p><p><br></p><p>Technical knowledge: Familiarity with CAD/CAM software for mold design (CATIA, SolidWorks, etc.). Knowledge of electricity, hydraulics, pneumatics and automation.</p><p><br></p><p>Materials knowledge: Expertise in polymers, rubber, metals, or other materials used in molding. Knowledge of thermoplastic molds and injection molding processes.</p><p><br></p><p>Analytical skills: Ability to analyze complex technical problems and propose viable solutions.</p><p><br></p><p>Production methodologies: Knowledge of Lean Manufacturing practices, Six Sigma, and continuous improvement tools.&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp;</p><p><br></p><p>Microsoft Office</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Dipl me :</h2><p><font dir="auto" ><font dir="auto" >Bachelor's or Master's degree in industrial engineering, Advanced Diploma in Mechanical Manufacturing or Technical Engineering</font></font></p><h2>Exp rience :</h2><p><font dir="auto" ><font dir="auto" >Minimum 3-5 years of experience in a similar role, with specific expertise in molding (plastic injection, compression molding, extrusion molding, etc.)</font></font></p><h2><font dir="auto" ><font dir="auto" >Technical knowledge:</font></font></h2><p><font dir="auto" ><font dir="auto" >Familiarity with CAD/CAM software for mold design (CATIA, SolidWorks, etc.). Knowledge of electricity, hydraulics, pneumatics and automation.</font></font></p><h2><font dir="auto" ><font dir="auto" >Knowledge of materials:</font></font></h2><p><font dir="auto" ><font dir="auto" >Expertise in polymers, rubber, metals or other materials used in molding. Knowledge of thermoplastic molds and injection processes.</font></font></p><h2><font dir="auto" ><font dir="auto" >Analytical skills:</font></font></h2><p><font dir="auto" ><font dir="auto" >Ability to analyze complex technical problems and propose viable solutions.</font></font></p><h2>M thodologies de production :</h2><p><font dir="auto" ><font dir="auto" >Knowledge of Lean Manufacturing practices, Six Sigma, and continuous improvement tools.</font></font></p><p>MicrosoftOffice</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> Company culture : <p><strong>Alten Maroc </strong>is defined by a deeply <strong>collaborative</strong> culture, focused on people, trust, and strong team support, with hands-on managers who guide and develop talent.<br> This environment is enhanced by a strong drive for <strong>innovation</strong>, encouraging creativity, initiative, and experimentation across projects.<br> A structured and disciplined organization ensures <strong>efficiency</strong>, rigor, and quality in engineering delivery.<br> <strong>Performance</strong> and ambition are part of the culture as well, supporting collective success while maintaining a positive and caring atmosphere. </p><br><br> <br> Job : <p><strong>In this role, your main tasks will be:</strong></p><br><br><p>• Quality Data Management: Manage quality data for analysis and reports.<br>• Quality Animation: Lead quality initiatives and manage technical issues.<br>• Development Tools: Use tools for managing defects during development.<br>• Reactive Quality: Implement reactive quality measures, learn from them, and ensure quality at launch.<br>• Coordination: Coordinate and lead teams to ensure quality standards.</p><br><br> <br> Required profile : <p><strong>Degree:</strong> A Master's degree in Engineering (Mechanical, Industrial, Mechatronics, or Quality Engineering)</p><br><br><p><strong>Experience:</strong> at least 1 year of experience in quality management, data analysis, or a coordination role, preferably in industries like automotive, aerospace, or manufacturing.</p><br><br><p><strong>Skills:</strong></p><br><br><p>• Experience in automotive interior, mechatronics, or similar fields (preferred).<br>• Knowledge of Stellantis processes and tools (e.g., GST, APQP).<br>• Proficiency in tools for managing defects during development.<br>• Knowledge of CATIA V6 (not mandatory but a plus).<br>Personal Skills<br>• Strong ability to coordinate and lead teams.<br>• Analytical and problem-solving mindset.<br>• Ability to manage technical issues and implement quality improvements.<br>Languages<br>• English: minimum level B2.1.</p><br><br> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> Company culture : <p><strong>Alten Maroc </strong>is defined by a deeply <strong>collaborative</strong> culture, focused on people, trust, and strong team support, with hands-on managers who guide and develop talent.<br> This environment is enhanced by a strong drive for <strong>innovation</strong>, encouraging creativity, initiative, and experimentation across projects.<br> A structured and disciplined organization ensures <strong>efficiency</strong>, rigor, and quality in engineering delivery.<br> <strong>Performance</strong> and ambition are part of the culture as well, supporting collective success while maintaining a positive and caring atmosphere. </p><br><br> <br> Job : <ul><li>Create 3D designs of parts and sub-assemblies (plastic, sheet metal, mechanical)</li><li>Produce 2D drawings (functional dimensioning, tolerancing)</li><li>Ensure compliance with design rules (DFM, DFA)</li><li>Manage packaging and multi-disciplinary integration</li><li>Participate in design reviews</li><li>Track technical changes (ECR/ECO)</li><li>Collaborate with:<ul><li>calculation / simulation teams</li><li>quality</li><li>industrialization</li><li>suppliers</li></ul></li><li>Ensure data consistency in PLM tools</li><li>Verify technical and industrial feasibility</li></ul> <br> Required profile : <ul><li>Master's degree (engineering school or master's)</li><li>Experienced CAD Designer in mechanical design, specializing in 3D/2D modeling and product integration, working on industrial projects (automotive, rail, aeronautics, or equipment).</li><li>The candidate masters CAD tools and design constraints to deliver robust, industrializable solutions that meet client requirements.</li><li>Proficiency in one or more CAD tools:<ul><li>CATIA V5 / V6</li><li>CREO</li><li>NX (Siemens)</li></ul></li><li>Strong skills in:<ul><li>mechanical design</li><li>plastic design (injection)</li><li>sheet metal design</li></ul></li><li>Good knowledge of:<ul><li>ISO dimensioning / GD&amp;T</li><li>dimension chains</li><li>functional tolerancing</li></ul></li><li>Knowledge of manufacturing processes:<ul><li>plastic injection</li><li>stamping</li><li>machining</li></ul></li><li>Proficiency in PLM tools:<ul><li>ENOVIA / Teamcenter / Windchill</li></ul></li><li>Reading and understanding technical specifications</li></ul><p>Soft Skills:</p><br><br><ul><li>Rigor and attention to detail</li><li>Analytical and problem-solving skills</li><li>Good interpersonal skills and team spirit</li><li>Autonomy and proactivity</li><li>Ability to work in a project environment (deadlines / pressure)</li><li>Clear communication with technical and non-technical teams</li></ul><br> <br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>AVL Maroc SARL AU offers a job in Morocco (MA) as</p> <b>System Developement Engineer - Braking Systems</b> <p> </p> <p> </p><p> </p> <p> </p> <p></p> <p> </p> <p> <b>YOUR RESPONSIBILITIES:</b> </p> <p> </p> <p> </p><ul> <li>Responsible for the overall braking system architecture (electrical/electronic, mechanical, and software)</li> <li>Development of system concepts and interface definitions</li> <li>Definition, management, and traceability of system requirements</li> <li>Coordination of subsystems, suppliers, and internal engineering teams</li> <li>Ensuring seamless vehicle-level system integration</li> <li>Planning and execution of verification and validation (V&amp;V) activities</li> <li>Ensuring functional safety and compliance with applicable regulatory requirements</li> </ul> <p></p> <p> </p> <p> <b>YOUR PROFILE:</b> </p> <p> </p> <p> </p><ul> <li>Degree in Automotive Engineering, Mechanical Engineering, Mechatronics, Electrical Engineering, or a related field</li> <li>Significant experience in braking system development</li> <li>Strong knowledge of mechatronic systems and vehicle dynamics</li> <li>Experience in Systems Engineering and system architecture</li> <li>Knowledge of ASPICE, ISO 26262, and the V-model development process</li> <li>Experience in technical coordination and/or project management</li> <li>Strong analytical and structured problem-solving skills</li> </ul> <p></p> <p> </p> <p> <b>We Offer :</b> </p> <p> </p> <ul> <li> <b>Smooth Integration:</b> Our technical and personal onboarding process ensures you can easily and quickly adapt to your new role.</li> <li> <b>Career Development:</b> Growth and advancement opportunities within the company, including mentoring and training programs tailored to your professional goals.</li> <li> <b>Work Flexibility:</b> Options for remote work and flexible hours to help maintain a healthy work-life balance.</li> <li> <b>Collaborative Environment:</b> A company culture that fosters open communication, teamwork, and innovative thinking.</li> <li> <b>Community Connection:</b> Regular employee events and activities that build camaraderie and strengthen team bonds.</li> <li> <b>Recognition and Support:</b> A commitment to acknowledging your contributions and providing the necessary support for you to thrive professionally.</li> </ul> <p> </p> <p>Together with our clients, we are shaping the future of mobility!</p> <p> </p> <p> <b>If you meet these qualifications and are looking for a new challenge, we encourage you to apply so we can discuss this exciting opportunity further!</b> </p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><b>OUR STORY</b><br>At STMicroelectronics, we believe in the power of technology to drive innovation and make a positive impact on people, businesses, and society. As a global semiconductor company, our advanced technologies and chips form the hidden foundation of the world we live in today.<br>When you join ST, you will be part of a global business with more than 115 nationalities, present in 40 countries, and comprising over 50,000 diverse and dedicated creators and makers of technology around the world.<br>Developing technologies takes more than talent: it takes amazing people who understand collaboration and respect. People with passion and the desire to disrupt the status quo, drive innovation, and unlock their own potential.<br>Embark on a journey with us, where you can innovate for a future that we want to make smarter and greener, in a responsible and sustainable way. Our technology starts with you.<br>___________________________________________<br><b>YOUR ROLE</b><br>* Manage manufacturing process for Aluminium wire bonding <br> * Insure good assembly yields, SPC Cpk, FMEA RPN follow-up, Quality gates results and analysis, 8D boards score, internal and external customers audits results associated to wire bonding<br> * Responsible for providing technical support and guidance on process implementation and analysis to ensure conformance of the manufacturing process to set specifications.<br> * Support in development of new product and ensures proper implementation of established manufacturing processes. <br> * Manage daily/Weekly/Monthly and quarterly follow-up of production lots: Hold/SML with root causes identification within MRB meetings related to wire bonding<br> * Conduct deep technical analysis, process optimisations, propose/ lead process changes related to wire bonding<br> * Conduct DoE related to wire bonding<br>YOUR SKILLS &amp; EXPERIENCES<br>* Process Engineer ( Mechanic or Electronic)<br> * Experience : 3 years in industry<br> * Knowledge in Jmp/ Simulation tools softwares<br><br></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The specification engineer is responsible for the end-to-end specification and requirements engineering of steering system components, ensuring technical consistency, completeness and compliance with system and OEM requirements</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Strong background in automotive project coordination / PMO</li><li>Proven experience in requirements engineering</li><li>Strong knowledge of mechatronic systems (ideally steering systems)</li><li>Analytical mindset with high attention to detail and documentation quality</li><li>Minimum 5 years of experience</li><li>EXPERTISE</li><li>Experience in automotive development (preferred VW)</li><li>Experience in steering development (preferred)</li><li>Project management</li><li>Requirements engineering</li><li>Hardware development wiring diagram, design and layout, EMV</li><li>Mechanic development installation space investigation, technical drawings, system design, acoustic, stiffness</li><li>Software development run time, architecture, trace analysis, Verbund management from component view (preferred)</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><br>POSITION SUMMARY<br>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display advanced ability to read standard blue prints and electrical schematics concerning plumbing and HVAC. Display above average engineering operations skills and strong general mechanical ability. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Troubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TV's. Use the Lockout/Tagout system before performing any maintenance work. Display advanced knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers as necessary. Display ability to perform Engineer on Duty responsibilities, including readings and rounds.<br>Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested.<br>PREFERRED QUALIFICATIONS&nbsp;<br>Education: High school diploma or G.E.D. equivalent and vocational or technical background.<br>Related Work Experience: Extensive experience and training in general maintenance, electrical or refrigeration, parts inventory and requisition, exterior and interior surface preparation and painting.<br>At least 2 years of hotel engineering/maintenance experience.<br>Supervisory Experience: No supervisory experience.&nbsp;<br>License or Certification: Valid Driver’s License<br>REQUIRED QUALIFICATIONS<br>Universal Chlorofluorocarbon (CFC) Certification<br>Must meet applicable state and federal certification and/or licensing<br>requirements.<br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br>Marriott Hotels strive to elevate the art of hospitality, innovating at every opportunity while keeping the comfort of the oh-so-familiar all around the globe. As a host with Marriott Hotels, you will help keep the promise of “Wonderful Hospitality. Always.” by delivering thoughtful, heartfelt, forward-thinking service that upholds and builds upon this living legacy. With the name that’s synonymous with hospitality the world over, we are proud to welcome you to explore a career with Marriott Hotels. In joining Marriott Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you. <br>JW Marriott&nbsp;is part of Marriott International's luxury portfolio and consists of more than 100 beautiful properties in gateway cities and distinctive resort locations around the world. JW believes our associates come first. Because if you’re happy, our guests will be happy. JW Marriott associates are confident, innovative, genuine, intuitive, and carry on the legacy of the brand’s namesake and company founder, J.Willard Marriott. Our hotels offer a work experience unlike any other, where you’ll be part of a community and enjoy true camaraderie with a diverse group of co-workers. JW creates opportunities for training, development, recognition and most importantly, a place where you can pursue your passions in a luxury environment with a focus on holistic well-being. Treating guests exceptionally starts with the way we take care of our associates. That’s The JW Treatment™. In joining JW Marriott, you join a portfolio of brands with Marriott International. Be where you can do your best work,​ begin&nbsp;your purpose,&nbsp;belong&nbsp;to an amazing global​&nbsp;team, and&nbsp;become&nbsp;the best version of you.</span> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display advanced ability to read standard blue prints and electrical schematics concerning plumbing and HVAC. Display above average engineering operations skills and strong general mechanical ability. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Troubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TV's. Use the Lockout/Tagout system before performing any maintenance work. Display advanced knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers as necessary. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Education: High school diploma or G.E.D. equivalent and vocational or technical background.</li><li>Related Work Experience: Extensive experience and training in general maintenance, electrical or refrigeration, parts inventory and requisition, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience.</li><li>Supervisory Experience: No supervisory experience.</li><li>License or Certification: Valid Driver s License</li></ul><p>REQUIRED QUALIFICATIONS</p><ul><li>Universal Chlorofluorocarbon (CFC) Certification</li><li>Must meet applicable state and federal certification and/or licensing requirements.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><font dir="auto" ><font dir="auto" ><font dir="auto" ><font dir="auto" >Vehicle Architect and Implementation - Advanced Consultant Engineer</font></font></font></font></p><p><font dir="auto" ><font dir="auto" ><br></font></font></p><p><font dir="auto" ><font dir="auto" >You will be involved in integration studies, analysis of technical constraints and coordination with the design and industrialization teams, while ensuring compliance with quality, cost and time requirements.</font></font></p> <p><strong><font dir="auto" ><font dir="auto" >Profile:</font></font></strong><font dir="auto" ><font dir="auto" > Mechanical/automotive engineer with experience in vehicle architecture and mastery of CATIA V5/V6.</font></font></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><font dir="auto" ><font dir="auto" >Mechanical/automotive engineer with experience in vehicle architecture and mastery of CATIA V5/V6.</font></font></p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><font dir="auto" ><font dir="auto" >Job Description: ALTEN supports its client in its project management activities within the TS-TC (Train Control and Train System) entity. The system engineer is responsible for the development and integration of train equipment (air conditioning, doors, battery, etc.). The mission consists of: Managing system requirements (drafting, updating, monitoring); Managing suppliers (documentation, planning, clauses, etc.); Verifying compliance with specifications; Validating the conformity of supplier deliverables (3D design, wiring, functional, industrialization); Participating in technical meetings with the client; Drafting, participating in, and leading equipment performance tests; Participating in change committee meetings; Interfacing with other project teams (Control and Command, 3D Design, Wiring, RAMS, Validation).</font></font></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><font dir="auto" ><font dir="auto" >Education: Master's degree (Bac+5) in mechanical engineering, mechatronics, electromechanics, embedded systems</font></font></li><li><font dir="auto" ><font dir="auto" >Experience: 3-5 years</font></font></li><li><font dir="auto" ><font dir="auto" >Required skills</font></font></li><li><font dir="auto" ><font dir="auto" >Technical skills: Requirements management, supplier management, DOORS (an asset), knowledge of electrical, mechanical, pneumatic, and hydraulic systems</font></font></li><li><font dir="auto" ><font dir="auto" >Soft skills: Facilitating meetings and managing progress on topics; Analytical skills; Practical mindset (ability to put oneself in the users' shoes); Initiative and autonomy; Escalation of alerts to supervisors and decision-makers</font></font></li><li><font dir="auto" ><font dir="auto" >Languages: French, English (fluent/master, spoken and written)</font></font></li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job : <p>On behalf of our client, specialized in the automotive textile sector, we are recruiting a CAD Design Engineer (M/F) based in Tangier.</p><br><br><p>Main tasks:<br>Ensure the design and development of products using CAD software;<br>Create and update technical drawings according to customer requirements;<br>Participate in the monitoring and optimization of design projects;<br>Collaborate with the production, quality, and industrialization teams;<br>Ensure compliance with technical standards and deadlines.</p><br><br> <br> Required profile : <p>Master's degree (Bac+5) in mechanical engineering, industrial design, or equivalent;<br>Mandatory experience of 3 to 4 years in the textile or automotive textile sector;<br>Good command of CAD design software;<br>Analytical skills, rigor, and team spirit;<br>Good communication level in French and/or English.</p><br><br> <br><br> </div>

<p style=\"font-family:Arial;\">A Maintenance Shift Engineer is responsible for all maintenance issues within the hotel to deliver an excellent Guest and Member experience while performing daily checks, repairing equipment, and coordinating renovation projects.</p><p style=\"font-family:Arial;\"><br><strong>What will I be doing?</strong></p><p style=\"font-family:Arial;\">As an Assistant Chief Engineer, you will be responsible for all maintenance issues within the hotel, daily, maintenance checks, and repairing mechanical equipment to deliver an excellent Guest and Member experience. An Assistant Chief Engineer will also be required to coordinate renovation projects and develop emergency programs. Specifically, you will be responsible for performing the following tasks to the highest standards:</p><ul><li>Responsible for maintenance issues within the hotel</li><li>Perform daily checks around the hotel</li><li>Conduct lift emergency release procedures as required</li><li>Diagnose, maintain, and repair mechanical equipment within the hotel</li><li>Ensure good relationships are built with internal and external customers</li><li>Maintenance of all hotel fixtures and fittings to ensure they are in safe condition and take action when any unsafe situations arise</li><li>Develop, implement, and direct all emergency programs</li><li>Develop, implement and manage energy conservation programs for the property to minimize expenses</li><li>Coordinate renovation bidding, define the cost and scope of the project, and oversee the general contractor and subcontractors to ensure quality work is performed cost effectively</li><li>Perform special projects and other responsibilities as assigned</li><li>Responsible for the health and safety of the hotel</li><li>Ensure monthly safety inspections take place and employees are trained accordingly</li></ul><p style=\"font-family:Arial;\"><strong>What are we looking for?</strong></p><p style=\"font-family:Arial;\">A Maintenance Shift Engineer serving Hilton brands is always working on behalf of our Guests and working with other Team Members. To successfully fill this role, you should maintain the attitude, behaviours, skills, and values that follow:</p><ul><li>Advanced knowledge of building management/engineering</li><li>Positive attitude</li><li>Good communication skills</li><li>Committed to delivering a high level of customer service</li><li>Excellent grooming standards</li><li>Flexibility to respond to a range of different work situations</li><li>Ability to work under pressure</li><li>Ability to work on their own</li><li>Previous experience in a management role</li></ul><p style=\"font-family:Arial;\">It would be advantageous in this position for you to demonstrate the following capabilities and distinctions:</p><ul><li>First Aid</li><li>Vocational training in engineering or similar field</li></ul><p style=\"font-family:Arial;\"><br><strong>What will it be like to work for Hilton?</strong></p><p style=\"font-family:Arial;\">Hilton is the leading global hospitality company, spanning the lodging sector from luxurious full-service hotels and resorts to extended-stay suites and mid-priced hotels. For nearly a century, Hilton has offered business and leisure travelers the finest in accommodations, service, amenities and value. Hilton is dedicated to continuing its tradition of providing exceptional guest experiences across its <a target=\"_blank\" rel=\"noopener noreferrer\" href=\"http://jobs.hiltonworldwide.com/our-brands/index.php\">global brands</a>.  Our vision “to fill the earth with the light and warmth of hospitality” unites us as a team to create remarkable hospitality experiences around the world every day.  And, our amazing Team Members are at the heart of it all!</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Methods &amp; Industrialization Engineer combines efficiency, rigor, and inventiveness to develop, define, and optimize manufacturing and production management methods. As a Methods &amp; Industrialization Engineer, your responsibilities will include: Assistance in training technical and production personnel on aeronautical parts. Monitoring the skills, authorizations, and qualifications of maintenance and methods teams. Complete management of technical documentation: creation, updating, distribution, and compliance with customer requirements and EN9100 standards. Production of industrial files and workflows. Monitoring the configuration of parts according to regulatory requirements. Tool management: registration, control, maintenance, and validation according to quality procedures. Preparation and participation in quality audits. Conducting technical inspections, FAI, customer acceptance, quality investigations, and corrective actions. Technical assistance to operators, problem-solving, definition of plans and sketches. Monitoring of charge transfers between CI (France) and CIM (Morocco) units. Participation in production operations (factory openings/closings, safety, hygiene, environment, energy). Supervision of technical teams: maintenance, methods, training. Organization of follow-up meetings and management of actions to be carried out.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bac+5 level education (Industrial Engineer, Process and Materials Engineering, Mechanical Engineering).</li><li>3 to 5 years of experience in a similar role.</li><li>Proficiency in the company's industrial processes.</li><li>Proficiency in the Microsoft Office suite.</li><li>Proficiency in Quality Standards EN9100, ISO9001.</li><li>Your interpersonal skills, curiosity, ability to propose solutions, and innovative mindset will enable you to succeed in your missions and thrive in this role.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Engineer is expected to deliver services to the Wheel Development Team within the Chassis Design Division. The services include, but are not limited to, the following tasks:</p> <p> 1. Develop Wheels and Wheel Caps for OE and/or Accessory Applications </p> <ul> <li>Conduct target-setting investigations (mass, cost, performance requirements, etc.).</li> <li>Formalize agreed targets into Wheel (Cap) Planning Drawings and RDDP (Request for Design &amp; Development of Part).</li> <li>Lead development activities to achieve agreed targets in close collaboration with key stakeholders (Stylists, Suppliers, etc.) during the design feasibility stage.</li> <li>Confirm target achievement on actual wheels and wheel caps, with the necessary analyses and countermeasures to meet project milestones.</li> <li>Collaborate closely with downstream stakeholders, such as assembly plants, to ensure smooth production preparation.</li> <li>Ensure timely release of drawings and related technical documentation throughout the full development project lifecycle.</li> <li>Report development status and proactively escalate issues to divisional management and external stakeholders.</li> </ul> <p> 2. Proceed with Technical Development for Wheels &amp; Wheel Caps </p> <ul> <li>Execute pre-study and/or pre-development activities for future technology applications.</li> <li>Ensure project deliverables are achieved within defined constraints (schedule, budget, etc.).</li> <li>Deliver clear and timely reports to budget providers and divisional management with a customer-oriented mindset.</li> </ul> <p> 3. Contribute to Improved Working Methodologies </p> <ul> <li>Identify issues and improvement opportunities within the current development process.</li> <li>Propose relevant countermeasures and drive or support their implementation.</li> </ul> <p> 4. Support Mass Production Concerns </p> <ul> <li> <strong>Quality :</strong> Investigate customer field issues as needed and implement effective corrective actions within agreed timelines.</li> <li> <strong>Cost :</strong> Analyze cost reduction opportunities, assess all relevant side effects, and implement approved countermeasures within the defined timeframe.</li> </ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Education :</strong> Bachelor s degree in Mechanical Engineering or a related field.</p> <ul> <li><strong>Experience :</strong> 3+ years of proven experience in project management within automotive or mechanical engineering environments. </li> <li><strong>Technical Skills :</strong> Strong understanding of mechanical components and manufacturing processes.</li> <li><strong>Soft Skills :</strong> Excellent communication, organizational, and problem-solving abilities.</li> <li><strong>Languages :</strong> Proficiency in English (additional languages are a plus).</li> </ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> Company culture : <p><strong>Alten Maroc </strong>is defined by a deeply <strong>collaborative</strong> culture, focused on people, trust, and strong team support, with hands-on managers who guide and develop talent.<br> This environment is enhanced by a strong drive for <strong>innovation</strong>, encouraging creativity, initiative, and experimentation across projects.<br> A structured and disciplined organization ensures <strong>efficiency</strong>, rigor, and quality in engineering delivery.<br> <strong>Performance</strong> and ambition are part of the culture as well, supporting collective success while maintaining a positive and caring atmosphere. </p><br><br> <br> Job : <p><strong>ALTEN</strong> is supporting its client in project management activities within the TS-TC (Train Control and Train System) division.</p><br><br><p>The systems engineer is responsible for the development and integration of train equipment (Air Conditioning, Doors, Battery, etc.).</p><br><br><p><strong>The mission includes: </strong></p><br><br><ul><li>System requirements management (writing, updating, tracking)</li><li>Supplier management (documentation, planning, clause-by-clause, etc.)</li><li>Verification of compliance with the specifications</li><li>Validation of supplier deliverables (3D design, wiring, functional, industrialization)</li><li>Participation in technical meetings with the client</li><li>Writing, participation, and management of equipment performance tests</li><li>Participation in modification committee meetings</li><li>Liaison with other project teams (Control Command, 3D Design, Wiring, RAMS, Validation)</li></ul> <br> Required profile : <p><strong>Profile</strong></p><br><br><ul><li><strong>Education:</strong> Master's degree (Bac+5) in Mechanical Engineering, Mechatronics, Electromechanical Engineering, or Embedded Systems</li><li><strong>Experience:</strong> 3 to 5 years</li><li>With experience in Systems Engineering (Development of complex systems containing mechanical, electrical, and SW components)</li></ul><p><strong>Required Skills</strong></p><br><br><ul><li><p><strong>Technical:</strong></p><br><br><ul><li>Requirements management</li><li>Supplier management</li><li>DOORS <em>(a plus)</em></li><li>Knowledge in electrical, mechanical, pneumatic, hydraulic systems</li></ul></li><li><p><strong>Soft skills:</strong></p><br><br><ul><li>Meeting facilitation and progress tracking</li><li>Synthesis skills</li><li>Practical mindset <em>(ability to put oneself in the users' shoes)</em></li><li>Initiative and autonomy</li><li>Reporting alerts to clients and decision-makers</li></ul></li><li><p><strong>Languages:</strong> French, English <em>(fluent/mastered, spoken and written)</em></p><br><br></li></ul> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company culture : <p><strong>SGS Maroc SA</strong> operates within a <strong>predominantly collaborative culture</strong>, where people, trust and employee well-being are central to the organization’s values. A close and supportive management style encourages accountability, teamwork and strong human relationships. This people-focused approach is complemented by a <strong>solid performance-driven dimension</strong>, emphasizing results, competitiveness and customer orientation. Well-established <strong>organizational processes</strong> ensure reliability and operational efficiency, while a more limited innovation focus supports continuous improvement over time. </p><br><br> <br> Job : <p>Reporting to the Regional OCM Manager, the Technical Sales Engineer is responsible for the commercial development and technical support of Oil Condition Monitoring (OCM) activities in Morocco.</p><br><br><ul><li>Promote SGS OCM services to existing and prospective clients (oil industry, energy production, marine)</li><li>Identify new market opportunities and develop the client portfolio</li><li>Prepare commercial proposals, price offers, and contracts</li><li>Ensure technical follow-up of client contracts and communicate analysis results</li><li>Be the reference technical contact for clients, ensure their satisfaction</li><li>Contribute to regular reporting on commercial performance</li></ul> <br> <br> Required profile : <ul><li>Master's degree in engineering (Mechanical, Electromechanical, or Maintenance)</li><li>3 to 4 years of experience in technical support and/or B2B sales</li><li>Proficiency in CRM tools and Microsoft Office Suite</li><li>Good knowledge of lubricants, lubrication, or industrial maintenance (an asset)</li><li>Experience in the Oil &amp; Gas, mining, or energy production sectors (an asset)</li><li>Excellent interpersonal, negotiation, and presentation skills</li><li>Autonomous, results-oriented, team spirit</li><li>Proficiency in French and English</li></ul> <br><br> </div>