Maintenance Technician Jobs in Morocco

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Result of Service<br>Provision of emergency aircraft crash, rescue, and firefighting (ARFF) services at MINURSO airfields and landing sites to ensure adequate emergency response coverage, support safe flight operations throughout the Mission's area of responsibility, and address the existing capability gap in the provision of these essential services.<br> Work Location<br>Laayoune<br> Expected duration<br>6 months<br> Duties and Responsibilities<br>Under the overall supervision of the Chief Technical Compliance and Quality Assurance and within the Airfields and Air Terminal Cell, the Air Operations Assistant Aviation Fire Marshal is responsible for planning, coordinating, supervising, and monitoring aviation firefighting and rescue services to ensure the safe conduct of all aviation operations throughout the Mission area. The incumbent will ensure that aviation firefighting resources, equipment, and emergency response arrangements remain operationally ready and compliant with United Nations Aviation Standards and ICAO Standards and Recommended Practices (SARPs). Within the delegated authority, the Air operation Assistant (Aviation Fire Marshal) will carry out the following duties but not limited to the following: • Manage and supervise Aircraft Rescue and Firefighting (ARFF) operations at MINURSO operational airfields, helipads, and temporary landing sites. • Assists with the coordination of the provision of reliable, cost effective and efficient emergency crash and rescue (ECR) support (including ground handling support) to the air operations activities of MINURSO. • Maintain an effective and fully operational aviation firefighting capability throughout the Mission. • Verifies that airfields/air terminals and landing sites are equipped for UN air operations in accordance with the requirements of the DFS Aviation Manual and UN AVSTADS with specific emphasis on ECR equipment • Conduct regular inspections of firefighting facilities and equipment to ensure serviceability and compliance with applicable standards. • Ensure continuous operational readiness of firefighting vehicles, rescue equipment, firefighting agents, communication systems, and personal protective equipment. • Assist in the Development, revision, and implementation of aviation firefighting Standard Operating Procedures (SOPs), and contingency procedures. • Plan, coordinate, and conduct emergency response exercises, aircraft accident simulations, and live firefighting drills involving aviation personnel, and other Mission stakeholders. • Provide technical guidance on aircraft rescue, firefighting techniques, aviation fuel fire hazards, hazardous materials (HAZMAT), and aircraft incident management. • Conduct fire safety inspections and fire risk assessments of aviation facilities, fuel storage installations, and operational sites. • Assists with the development of technical specifications for ECR goods and services, provides inputs to the responses to bids and technical evaluations to ensure that vendor's proposals meet technical requirements. • Monitors that appropriate ECR reference documents are current, readily available and accessible to all aircrew members and aviation personnel. • Provides inputs in the development of the standard operating procedures for the related aviation processes. • Provides inputs in the development of budget proposals for the mission's ECR requirements. • Provides inputs for the preparation of operational plans, performance reports, and responses to internal and external audit observations. • Assist with the Coordination routine (regular passenger/cargo, logistics resupply) flights, special(casualty and medical evacuation, VIP) flights and military operational flights in accordance with Standard Operating Procedures (SOPs), UN directives, Department of Field Support (DFS) Aviation Manual, UN Aviation Standards (UN AVSTADS), UN Aviation Safety Manual, ICAO standards and recommended practices and the host country's Aeronautical Information Publications (AIPs). • Assists with the coordination of the integrated search and rescue operations for UN air assets and other aircraft upon request. • Assists with the coordination of diplomatic over flight/landing clearances, ground handling support and hotel accommodation/meal/transportation arrangements for aircrews. • Assists in conducting internal audits in accordance with the approved unit's/section's Internal Audit Program and Internal Audit Plan. • Assists in conducting random checks and inspections of civilian air operators. • Maintain records of inspections, equipment maintenance, emergency drills, and operational readiness. • Advise the Chief Aviation Officer/or Chief Technical Compliance on improvements to aviation emergency response capability and fire safety programmes. • Perform any other operational or administrative delegated duties as per the requirement.<br> Qualifications/special skills<br>High school diploma is required. A minimum of six (6) years of progressively responsible experience in air transport ECR operations, including active participation in aviation rescue operations or related aviation safety experience, and Fighting Authority is required. Experience in firefighting techniques, firefighting vehicles, conducting aviation emergency exercises and managing firefighting equipment and resources is required. Experience in Aviation firefighting (rotary-wing and fixed-wing) aircraft operations is required. Experience in at least two of the following fields directly related to: air transport operations or/ airfields management or/ Quality Assurance or/Resources management or /contract management for air transport services is highly desirable. Experience in the use of ICAO standards and recommended practices is desirable Previous experience in United Nations peacekeeping operations or other international organizations and working in remote, austere, desert, or conflict affected environments is desirable. A vocational training certificate in Aircraft Rescue and Fire Fighting, or crash Fire rescue, or Aviation Emergency Crash and Rescue from a Fire Brigade or Training Centre or National Fire is required. Training in the Aviation safety and quality management is desirable. Training as an aviation internal auditor is desirable. Training as a Fire Fighter vehicle operator in fire and rescue, dangerous goods and basic first aid is desirable. Training and certification as a Commercial Pilot, or a Flight Operations Officer/Flight Dispatcher, or an Aircraft Maintenance Technician, or a Ground Operations Officer, or an equivalent military qualification is desirable.<br> Languages<br>English and French are the working languages of the United Nations Secretariat. For the position advertised, fluency in oral and written English is required. Knowledge of French language is desirable.<br> Additional Information<br>Not available.<br> No Fee<br>THE UNITED NATIONS DOES NOT CHARGE A FEE AT ANY STAGE OF THE RECRUITMENT PROCESS (APPLICATION, INTERVIEW MEETING, PROCESSING, OR TRAINING). THE UNITED NATIONS DOES NOT CONCERN ITSELF WITH INFORMATION ON APPLICANTS’ BANK ACCOUNTS.<br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><b>Join Yazaki. Connect to the future.&nbsp;</b></p><br> <p><b>Country</b>:&nbsp;Morocco (MA)&nbsp;<br> <b>City</b>:&nbsp;Tangier<br> <b>Worksite / Location</b>:&nbsp;Tanger Plant&nbsp;</p><br> <p><b>Job Function</b>:&nbsp;CFO_IT&nbsp;<br> <b>Job Discipline</b>:&nbsp;&nbsp;<br> <b>Job Family</b>:&nbsp;Infrastructure</p><br> <p>Founded in 1929, Yazaki is a Japanese full systems supplier of wire harness, electrical, data products and solutions enabling vehicle electrification, connectivity, and autonomy integration. More than 235,000 committed and highly motivated employees in 45 countries make us one of the most successful international automotive suppliers. Join a family-owned company committed to being environmentally friendly in every aspect of its business, contributing to society, and inspiring trust. To strengthen our team, we are looking for a&nbsp;IT Technician L2 in our plant in [[location]].</p><br> <p><strong><span>Qualifications:</span></strong></p><br> <ul> <li>Bac +2 / Bac +3 diploma in IT, Computer Networks, Systems Administration, or equivalent.</li> <li>Minimum 2 years of experience in IT support, network support, or industrial IT environment.</li> <li>Good knowledge of networking basics: LAN/WAN, TCP/IP, DNS, DHCP, VLANs, routing, and switching.</li> <li>Experience with network equipment such as switches, routers, access points, and firewalls.</li> <li>Good troubleshooting skills for network, connectivity, hardware, and software incidents.</li> <li>Experience with Windows operating systems, Microsoft Office, and basic endpoint support.</li> <li>Basic knowledge of Active Directory, user accounts, permissions, and group policies.</li> <li>Experience supporting printers, scanners, thin clients, laptops, desktops, and shop floor devices.</li> <li>Ability to perform preventive maintenance and monitor IT infrastructure.</li> <li>Basic understanding of cybersecurity rules, access control, and IT security best practices.</li> <li>Ability to document technical actions, update network diagrams, and follow IT procedures.</li> <li>Experience using ticketing tools such as ServiceNow or similar ITSM platforms is a plus.</li> <li>Good communication skills in French and English.</li> <li>Ability to work under pressure and respond quickly to production-impacting issues.</li> <li>Team spirit, autonomy, discipline, and strong sense of responsibility.</li> <li>Previous experience in an automotive or manufacturing environment is a strong plus.</li> <li> <p><strong><span>Key Responsibilities:</span></strong></p><br> <ul> <li>Provide first and second-level IT support to users across all departments.</li> <li>Install, configure, maintain, and troubleshoot IT equipment such as desktops, laptops, printers, scanners, and peripherals.</li> <li>Support hardware, software, network, and application-related incidents.</li> <li>Manage and resolve IT support tickets within SLA deadlines, escalating issues when required.</li> <li>Ensure quick first-response support for production-impacting incidents.</li> <li>Monitor the status of IT systems, computers, printers, and network equipment.</li> <li>Support network connectivity troubleshooting: LAN, Wi-Fi, IP configuration, DNS, DHCP, and VLAN-related issues.</li> <li>Ensure compliance with Yazaki IT standards, security rules, and plant procedures.</li> <li>Coordinate with internal IT teams, vendors, and other departments for issue resolution.</li> <li>Support shop floor IT devices and ensure minimum downtime for production areas.</li> <li>Participate in preventive maintenance and continuous improvement of IT services.</li> </ul> </li> </ul><p>At Yazaki, we are&nbsp;committed to providing equal employment opportunities for everyone which extends to all aspects of the employment relationship.&nbsp;</p><br> <p>We are looking forward to receiving&nbsp;your application and to get to know you. Please apply by clicking the 'Apply Now' button. We wish you all the success in your application!&nbsp;</p><br> <p>Ps. Didn't find&nbsp;what you are looking for?<br> Take a look at our&nbsp;careers page! Be careful though, you might find your next dream job.&nbsp;</p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job : <p><strong>Mission:</strong> To manage the department responsible for the technical and operational acceptance of drinking water supply works and networks, from the study phase to transfer to operations, ensuring compliance with quality, safety, regulatory conformity, and asset performance requirements.</p><br><br><p><strong>Activities:</strong></p><br><br><ul><li>Service Management<ul><li>Organize, plan, and supervise the activities of the Works and AEP Network Acceptance service.</li><li>Manage, motivate, and evaluate the service teams.</li><li>Define priorities, allocate tasks, and monitor performance indicators.</li></ul></li><li>Acceptance of Works and Networks<ul><li>Manage the acceptance operations for AEP works (reservoirs, pumping stations, pipelines, hydromechanical and electromechanical equipment).</li><li>Verify the conformity of completed works against:<ul><li>contracts and contractual documents,</li><li>approved studies,</li><li>technical standards and best practices,</li><li>operational requirements.</li></ul></li><li>Participate in tests, water filling, and commissioning.</li></ul></li><li>Project / Operations Interface<ul><li>Ensure the interface between the Investment and Operations departments.</li><li>Guarantee the quality of works transfer to operations (as-built files, manuals, plans, etc.).</li></ul></li><li>Management of Reservations and Continuous Improvement<ul><li>Identify, formalize, and track the resolution of reservations.</li><li>Capitalize on lessons learned and contribute to the improvement of acceptance procedures.</li></ul></li><li>Reporting and Governance<ul><li>Provide periodic reports to management.</li><li>Participate in steering meetings and technical committees.</li></ul></li></ul> <br> <br> Required profile : <p><strong>Academic Background:</strong></p><br><br><ul><li>State-recognized engineering degree in Hydraulic Engineering, Civil Engineering, or equivalent</li></ul><p><strong>Professional Experience:</strong></p><br><br><ul><li>More than 3 years of experience in the drinking water sector.</li><li>Confirmed experience in at least one of the following areas:<ul><li>construction and acceptance of AEP works,</li><li>operation and maintenance of works and networks,</li><li>management of hydraulic projects.</li></ul></li><li>Experience in team management or cross-functional coordination is a plus.</li></ul><p><strong>Required Skills:</strong></p><br><br><ul><li><strong>Technical:</strong><ul><li>Mastery of drinking water supply works and networks.</li><li>Good knowledge of standards, regulations, and practices for construction acceptance.</li><li>Ability to conduct technical analysis and read project documents (plans, technical specifications, reports).</li><li>Knowledge of AEP works operation and maintenance.</li></ul></li><li><strong>Organizational and Managerial:</strong><ul><li>Ability to plan, coordinate, and prioritize activities.</li><li>Leadership and ability to manage a team.</li><li>Rigor, sense of responsibility, and synthesis skills.</li></ul></li><li><strong>Interpersonal:</strong><ul><li>Good communication and teamwork skills.</li><li>Ability to interact with multiple stakeholders (internal and external).</li></ul></li></ul> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Leads one or more platform teams; defines tactical and key strategic elements for middleware evolution serving multiple consumers. Accountable for performance, cost control, and reliability outcomes; escalations for distributed debugging and upgrade safety. Drives significant cross-team improvements to observability, SLOs, and resilience patterns. Engages stakeholders inside and outside the group; socializes migration plans and adoption playbooks.<br><p>Only Oracle brings together the data, infrastructure, applications, and expertise to power everything from industry innovations to life-saving care. And with AI embedded across our products and services, we help customers turn that promise into a better future for all. Discover your potential at a company leading the way in AI and cloud solutions that impact billions of lives.</p><br><p>True innovation starts when everyone is empowered to contribute. That’s why we’re committed to growing a workforce that promotes opportunities for all with competitive benefits that support our people with flexible medical, life insurance, and retirement options. We also encourage employees to give back to their communities through our volunteer programs.</p><br><p>We’re committed to including people with disabilities at all stages of the employment process. If you require accessibility assistance or accommodation for a disability at any point, let us know by emailing <u>accommodation-request_mb@oracle.com</u> or by calling 1-888-404-2494 in the United States.</p><br><p>Oracle is an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability and protected veterans’ status, or any other characteristic protected by law. Oracle will consider for employment qualified applicants with arrest and conviction records pursuant to applicable law.</p><br><br>Responsibilities:<br><p><strong>Key Responsibilities</strong></p><br><p><strong>Platform Software Development:</strong></p><br><ul><li><p>Lead multiple platform teams to standardize middleware patterns and client libraries used by several consumer teams.</p><br></li><li><p>Establish group-level guardrails for APIs/SDKs, deprecation strategies, and upgrade playbooks; track adoption and risk.</p><br></li><li><p>Sponsor shared observability frameworks and capacity models across teams; review error-budget posture and corrective actions.</p><br></li></ul><p><strong>Software Development and Coding - Design, Testing, and Optimization:</strong></p><br><ul><li><p>Leads teams and provides technical recommendations and guidance in designing software solutions and identifying, analyzing and ensuring alignment with requirements.</p><br></li><li><p>Manages the execution of processes to develop and guide new software features and enhancements following design specifications, ensuring accessibility, and to develop documents to clarify software design and code.</p><br></li><li><p>Leads code and/or functional reviews to drive improvements across a project.</p><br></li><li><p>Leads and reviews teams to conduct debugging and troubleshooting to identify and fix software issues across multiple components or functional areas.</p><br></li><li><p>Provides teams guidance to implement software testing (e.g., functional and non-functional), quality assurance processes, software error logging, monitoring, and observability for effective debugging.</p><br></li><li><p>Utilizes an analytic approach to conduct performance profiling and optimization of coding.</p><br></li><li><p>Leads teams in troubleshooting and resolving issues related to application programming interface (API) functionality and integration.</p><br></li><li><p>Leads teams to implement API versioning, lifecycle, and interoperability strategies.</p><br></li></ul><p><strong>Software Architecture - Software System Structural Design:</strong></p><br><ul><li><p>Leads teams to design and develop software, systems, and services.</p><br></li><li><p>Acts as a role model to provide technical guidance and domain expertise in software architecture decisions and best practices.</p><br></li><li><p>Leads teams to conduct periodic reviews and ensures adherence to architectural framework(s) and internal development practices and standards.</p><br></li><li><p>Collaborates with cross-functional teams to align and build software architecture with business and/or customer goals and priorities in focus.</p><br></li><li><p>Leads teams to implement performance optimization and scalability strategies in software design.</p><br></li><li><p>Impacts teams to conduct regular technology research and evaluation for architectural enhancements.</p><br></li></ul><p><strong>Issue/Defect Collaboration - Software Products Support:</strong></p><br><ul><li><p>Collaborates with stakeholders and external clients and/or partners to understand customer issues and align solutions.</p><br></li><li><p>Leads team(s) to provide technical guidance and appropriately prioritize support to customers regarding reported issues.</p><br></li><li><p>Acts as a role model for teams to advocate for customers' interests and suggests product enhancements based on feedback.</p><br></li><li><p>Develops, modifies, and executes policies to ensure customer satisfaction through timely resolution of issues and effective communication.</p><br></li><li><p>Leads teams through processes for handling customer issues and/or defects handling and directs them to training opportunities as needed.</p><br></li><li><p>Manages the investigation and troubleshooting of complex product maintenance issues to ensure customer agreement on short- and long-term solutions.</p><br></li></ul><p><strong>Practices and Standards Compliance - Security and Compliance:</strong></p><br><ul><li><p>Collaborates with teams and other stakeholders within and outside of group to establish, follow, and enforce documented security criteria, development industry best practices and processes, and coding standards.</p><br></li><li><p>Ensures clarity of teams' operational objectives for adherence to broad acceptance criteria.</p><br></li><li><p>Implements moderately complex secure software development practices requiring information gathering and analysis to prevent security vulnerabilities.</p><br></li></ul><p><strong>Development Operations - System Maintenance:</strong></p><br><ul><li><p>Leads teams in performing periodic maintenance and testing operations for systems that require upgrading or patching (e.g., for critical vulnerabilities).</p><br></li><li><p>Delegates assignments to teams to implement and evolve standard operating procedures (SOP) for development and for driving improvements, ensuring automation, testing, and debugging of systems to ensure service/product availability, health, support, and reliability.</p><br></li></ul><p><strong>Core Responsibilities</strong></p><br><p><strong>Planning &amp; Execution:</strong></p><br><ul><li><p>Manages multiple medium- to large-scale projects or initiatives across teams, ensuring timelines, deliverables, and budgets when applicable are monitored and met. Provides direction to teams on project work, setting priorities, and aligning with business needs. Guides teams on adjusting plans to accommodate resource or timeline changes.</p><br></li></ul><p><strong>Collaboration &amp; Partnership:</strong></p><br><ul><li><p>Drives cross-functional partnerships to align expectations and shared objectives across multiple teams. Coaches team members to develop strategic relationships with business leaders, stakeholders, and external partners to foster collaboration and long-term success. Promotes inclusivity by actively seeking and listening to diverse perspectives, ensuring others feel heard and respected.</p><br></li></ul><p><strong>Problem Solving:</strong></p><br><ul><li><p>Provides direction to multiple teams on addressing complex operational and/or technical issues as well as providing guidance on analyzing complex data and/or information to identify solutions. Reviews and provides insights into unresolved or critical issues, helping the team to identify potential solutions.</p><br></li></ul><p><strong>Continuous Learning:</strong></p><br><ul><li><p>Models engaging in continuous learning to deepen expertise and stay ahead of industry trends, integrating best practices into strategic planning. Leverages feedback to drive personal and team skill improvements. Identifies skill gaps across teams, and empowers team members to pursue learning and knowledge sharing opportunities that build their expertise in new areas and coaches them to apply learnings to advance the organization.</p><br></li></ul><p><strong>Continuous Improvement:</strong></p><br><ul><li><p>Drives team to collaborate on, develop, and implement ideas to increase the efficiency and effectiveness of processes, protocols, and workflows within and across teams, providing oversight. Guides team to adopt new ideas for alternative approaches and methods and encourages feedback for continued improvement.</p><br></li></ul><p><strong>Performance and Development:</strong></p><br><ul><li><p>Drives performance across teams by providing feedback and coaching in alignment with performance management processes, guidelines, and expectations. Discusses development goals with team members, shares opportunities to facilitate career development, and ensures individual goals are aligned with broader organizational goals. Develops and manages talent acquisition pipeline by leading candidate interviews, monitoring promotion eligibility, and/or orchestrating talent resources.</p><br></li></ul><br>Qualifications:<br><p>Career Level - M3</p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job : <p>Reporting to the Merchandiser Manager, your mission will be to contribute to the performance and achieve the set objectives of the Casablanca-based office. You will work across departments to follow production from start to finish with the suppliers in your scope (subcontracted work).</p><br><br><p>Your daily tasks will include:</p><br><br><ul><li>Working with the Merchandiser Manager, brand teams, and office team to ensure brand sales</li><li>Following the entire sampling development process (technical file or picking request)</li><li>Organizing buyer buying trips</li><li>Finding negotiation leverage if prices are not accepted</li><li>Defining production milestones and managing deadlines (OK FIT / OK PROD / fabric and accessory delivery / production launch)</li><li>Obtaining all necessary brand approvals (patterns, samples, printing, embroidery, washing, trims, lab tests, etc.)</li><li>Monitoring the weekly production schedule and shipment tracking. Proposing action plans to anticipate problems and provide solutions with clear and transparent communication.</li><li>Supporting brands to achieve short lead times</li><li>Organizing regular meetings with brand buying and pre-production teams, with the quality team and suppliers to closely monitor work in progress, quality, and inspection planning.</li><li>Anticipating and resolving problems, ensuring timely delivery of goods and working with product development teams on trend development and selections.</li><li>Verifying and submitting shipping and accounting invoices.</li><li>Evaluating new suppliers and ensuring the consistency of the supplier panel according to brand needs and expectations (product offering, quality, compliance, price, lead time).</li><li>Ensuring good representation of the company's policy, codes of practice, and work process to ensure all products are developed/sourced in a socially compliant environment.</li></ul> <br> <br> Required profile : <p>Your academic background includes a Bac +4 degree (equivalent to a Bachelor's or Master's degree) with a specialization in Marketing, Production / Quality / Safety / Maintenance, or a related field. Solid training and in-depth knowledge in the Textile / Leather sector would be a significant asset. Proficiency in computer tools is essential.</p><br><br><p>Professional experience of 2 to 5 years is required.</p><br><br><p>The ideal candidate has the following skills:</p><br><br><p>Good knowledge of the Textile / Leather sector</p><br><br><p>Excellent command of computer and office software</p><br><br><p>Strong organizational and time management skills</p><br><br><p>Team spirit and good communication skills</p><br><br><p>Analytical and problem-solving abilities</p><br><br><p>High motivation and strong commitment</p><br><br><p>If you recognize yourself in this description and are ready to take on new challenges, don't wait any longer!&nbsp;</p><br><br> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company culture : <p><strong>Meski Invest - Riva Industries</strong> demonstrates a highly balanced corporate culture, with <strong>collaboration</strong> as its leading dimension, fostering strong human relationships, teamwork and close leadership. This people-oriented culture is supported by a strong focus on <strong>structure and operational excellence</strong>, where processes, rigor and quality are key priorities. The company also values <strong>performance</strong> and achievement, while maintaining openness to <strong>innovation</strong> and new ideas. This balance creates a work environment that is both people-centered, demanding and growth-oriented. </p><br><br> <br> Job : <p>Reporting to the STEELWORKS PRODUCTION MANAGER, you will be responsible for all activities related to ensuring efficient monitoring of the CCM process, guaranteeing smooth communication between the main CCM control room, the LF, and the EAF, in coordination with the CCM supervisor.</p><br><br><p>In this role, your missions will be:</p><br><br><p>• Ensure efficient monitoring of the CCM process by guaranteeing smooth communication between the main CCM control room, the LF, and the EAF, in coordination with the CCM supervisor, while strictly adhering to occupational health and safety (OHS), quality, environmental, and energy requirements;<br>Responsibilities<br>• Comply with and ensure compliance with Quality, Health, Safety, Environment, and Energy (QHSEE) rules;<br>• Ensure machine availability on time while following up on issues reported to the CCM team;<br>• Ensure compliant production under the best safety and quality conditions;<br>• Reduce CCM machine downtime;<br>• Coordinate with all departments (EAF, LF, Pourers, Maintenance, Warehouse, Laboratory, Quality);<br>• Identify machine malfunctions and propose corrective actions<br>• Ensure the recording of production data according to the CCM production report (Superheating card, Casting chemical analysis, etc.);<br>• Minimize and optimize scrap (Billet crops, Ladle returns, Tundish residue);<br>• Reduce defects detected in billet products in coordination with the post-quality inspector and the CCM Production supervisor;<br>• Resolve process and production problems daily for your shift;<br>• Guarantee that production complies with the manufacturing order and the requested specifications;<br>• Alert and inform your supervisor of any major problems impacting product quality;<br>• Comply with quality and safety standards;<br>• Report all machine anomalies at the end of each shift;<br>• Be capable of mastering risk analysis and eliminating them while respecting shared safety rules;<br>• Ensure a good level of cleanliness in the entire work area, including outdoor spaces;<br>• Collect, minimize, and eliminate waste in an ecologically sound manner.</p><br><br> <br> <br> Required profile : <p>• Minimum of a specialized technician diploma in automation, electromechanics, or process engineering.</p><br><br><p>• Knowledge in automation, electrical, hydraulic, and mechanical systems;<br>• Knowledge in metallurgy / steel industry;<br>• Knowledge in office software.<br>• Knowledge of integrated management systems (ISO 9001/45001/14001/50001).Behavioral Competencies<br>• Team spirit and cooperation;<br>• Listening and communication skills;<br>• Rigor;<br>• Availability;<br>• Sense of responsibility.&nbsp;</p><br><br> <br><br> </div>

<p><br></p><p>We are looking for a Helpdesk Technician who will be responsible for providing quick and useful assistance regarding IT systems, answering questions on technical subjects, and providing advice for resolving them.</p><p>Here is an overview of your daily life:</p><ul><li>Serve as the first point of contact for users for technical assistance and processing of their IT requests, by phone, email, or self-service portal.</li><li>Perform remote troubleshooting using diagnostic techniques and relevant questions.</li><li>Determine the best solution based on the problem and the details provided by users.</li><li>Support users throughout the incident resolution process.</li><li>Escalate unresolved incidents to different support groups.</li><li>Provide accurate information about IT products or services.</li><li>Log requests and incidents in different ITSM (IT Service Management) systems.</li><li>Transmit feedback or suggestions from clients to the relevant internal team.</li><li>Identify and suggest improvements to existing procedures.</li><li>Implement and update the knowledge base.</li></ul><p>Technical Environment:</p><ul><li>ITSM: Preferably LAN desk.</li><li>Knowledge base: SharePoint and Confluence.</li><li>Remote control tool: Teamviewer / SCCM / LogmeIn.</li><li>Office suite: Office 365.</li><li>Windows environment.</li><li>Analysis of software functionality.</li><li>Desktop / Laptop IT Hardware: Lenovo / HP / DELL.</li><li>Office and multifunction printers.</li><li>Multi-brand mobile devices: iOS / Android.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Bac+3 ideally in information technology, computer science, or another relevant field.</p><p>Proven experience as a helpdesk technician or in another user technical support role.</p><p>Technical know-how and professional knowledge of office products, databases, and remote access.</p><p>Able to diagnose and resolve hardware and software incidents.</p><p>Good communication skills in French and English, both written and oral.</p><p>Good customer management by phone and email.</p><p>Know-how:</p><ul><li>Professional knowledge of customer support</li><li>Good knowledge of virtualized environments</li><li>Good knowledge of network technologies</li></ul><p>Attitude:</p><ul><li>Listening, customer service oriented</li><li>Ability to manage stress</li><li>Adaptability</li><li>Sense of rigor and reactivity are essential</li><li>Very good assimilation capacity</li></ul><p>Skills:</p><ul><li>Good level of French and English (oral and written)</li><li>Very good speaking ability</li><li>Availability and flexibility (HNO Shift)</li><li>Teamwork spirit</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><font dir="auto" ><font dir="auto" >Job Description: The PDM (Project Diagnostic Manager) is the cross-functional technical expert ensuring ease of diagnosis, repair, and maintenance of vehicles, from design to after-sales service. Thanks to their expertise, they guarantee the long-term quality of the vehicle as well as a positive customer experience in the after-sales workshop.</font></font></p><p><font dir="auto" ><font dir="auto" >Main tasks:</font></font></p><ul><li><font dir="auto" ><font dir="auto" >Diagnostic consistency: verify strategies (DTCs, algorithms, sensors/ECU) and validate the robustness of the DTCs.</font></font></li><li><font dir="auto" ><font dir="auto" >Workshop support: defining repairability, preparing the new vehicle, identifying tools &amp; documentation.</font></font></li><li><font dir="auto" ><font dir="auto" >Cross-functional collaboration: working with electronics, software, motors, chassis, ADAS; managing cross-functional topics.</font></font></li><li><font dir="auto" ><font dir="auto" >Regulatory compliance: guarantee compliance with OBD, Euro 6/7 and approval.</font></font></li><li><font dir="auto" ><font dir="auto" >Long-term quality: detect all risks and strengthen robustness &amp; customer satisfaction.</font></font></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2><font dir="auto" ><font dir="auto" >Qualifications</font></font></h2><p><font dir="auto" ><font dir="auto" >Master's degree (Bac + 5) in industrial/mechanical engineering</font></font></p><p><font dir="auto" ><font dir="auto" >0 to 1 year of experience</font></font></p><p><font dir="auto" ><font dir="auto" >Proficiency in Excel/BI is a plus</font></font></p><p><font dir="auto" ><font dir="auto" >Problem solving</font></font></p><p><font dir="auto" ><font dir="auto" >Good posture</font></font></p><p><font dir="auto" ><font dir="auto" >Excellent communication</font></font></p><p><font dir="auto" ><font dir="auto" >English/French</font></font></p><p><font dir="auto" ><font dir="auto" >Coordination</font></font></p><p><font dir="auto" ><font dir="auto" >Result orientation</font></font></p><p><font dir="auto" ><font dir="auto" >Flexibility</font></font></p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><font dir="auto" ><font dir="auto" ><b>Job Description:</b> The Project Diagnostic Manager (PDM) is the cross-functional technical expert ensuring the ease of diagnosis, repair, and maintenance of STELLANTIS vehicles, from design to after-sales service. Thanks to their expertise, they guarantee the long-term quality of the vehicle as well as a positive customer experience in the after-sales workshop.</font></font></p><p><font dir="auto" ><font dir="auto" >Main tasks:</font></font></p><ul><li><font dir="auto" ><font dir="auto" >Diagnostic consistency: verify strategies (DTCs, algorithms, sensors/ECU) and validate the robustness of the DTCs.</font></font></li><li><font dir="auto" ><font dir="auto" >Workshop support: defining repairability, preparing the new vehicle, identifying tools &amp; documentation.</font></font></li><li><font dir="auto" ><font dir="auto" >Cross-functional collaboration: working with electronics, software, motors, chassis, ADAS; managing cross-functional topics.</font></font></li><li><font dir="auto" ><font dir="auto" >Regulatory compliance: guarantee compliance with OBD, Euro 6/7 and approval.</font></font></li><li><font dir="auto" ><font dir="auto" >Long-term quality: detect all risks and strengthen robustness &amp; customer satisfaction.</font></font></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><font dir="auto" ><font dir="auto" ><b>Qualifications</b></font></font></p><ul><li><font dir="auto" ><font dir="auto" >Master's degree (Bac + 5) in industrial/mechanical engineering</font></font></li><li><font dir="auto" ><font dir="auto" >0 to 1 year of experience</font></font></li><li><font dir="auto" ><font dir="auto" >Proficiency in Excel/BI is a plus</font></font></li><li><font dir="auto" ><font dir="auto" >Problem solving</font></font></li><li><font dir="auto" ><font dir="auto" >Good posture</font></font></li><li><font dir="auto" ><font dir="auto" >Excellent communication</font></font></li><li><font dir="auto" ><font dir="auto" >English/French</font></font></li><li><font dir="auto" ><font dir="auto" >Coordination</font></font></li><li><font dir="auto" ><font dir="auto" >Result orientation</font></font></li><li><font dir="auto" ><font dir="auto" >Flexibility</font></font></li></ul><p></p></section>

<p><br></p><p><b>JOB PURPOSE:</b></p><p>Lead the day-to-day field execution of WTG and BoP maintenance activities, ensuring safe, high quality, and timely delivery of preventive and corrective works, strong troubleshooting support, and proper documentation discipline, to sustain high availability and reliability of the wind farm under the supervision of the Site Engineer.</p><p><b>KEY ACCOUNTABILITIES:</b></p><p><b>Health, Safety, Security &amp; Environment</b></p><ul><li>Ensure compliance with HSSE policies, procedures, and controls across the plant to guarantee employee and asset safety, legislative compliance, and responsible environmental practices.</li><li>Perform regular PTW process inspection and ensure full compliance with NOMAC HSSE standards.</li><li>Ensure subcontractors full compliance with NOMAC HSSE standards and site rules.</li><li>Ensure a high level of HSSE awareness through regular coaching / toolbox talks and field presence to correct deviations.</li><li>Report all incidents and occurrences as per NOMAC Health and Safety policy and support investigation and action follow-up.</li><li>Lead daily field housekeeping closure after work (tools removal, waste collection, parts returned, area left safe/clean).</li><li>Perform weekly 5S walkdowns with technicians (turbine bases, workshop, service vehicles) and close actions.</li><li>Ensure technicians comply with fleet rules and confirm vehicle readiness before dispatch (safety equipment + basic checks).</li><li>Review weekly overspeed alerts for his team and apply first-level coaching, escalating repeated cases to Site Engineer / HSE.</li></ul><p><b>Operations &amp; Maintenance Execution (WTG + BoP)</b></p><ul><li>Supervise preventive and corrective maintenance works, daily troubleshooting, and repair/replacement of wind turbine mechanical, electrical, and hydraulic systems/components.</li><li>Supervise preventive and corrective maintenance activities of BoP equipment.</li><li>Provide first-line technical guidance to service technicians and ensure safe, efficient execution and quality of work.</li><li>Support and lead major component replacement activities (e.g., generators, Transformer, gearbox) by coordinating resources, tools, and field readiness.</li><li>Daily toolbox + job readiness check before dispatch (scope, hazards, tools, spares, access, weather, communications).</li><li>Work quality hold points for critical tasks (MV terminations, transformer work, torque marking, reinstatement checks).</li><li>Defect elimination loop: create/maintain a simple repeat defects log and propose permanent corrective actions to Site Engineer.</li><li>Lifting &amp; rigging readiness checks: verify lifting accessories certificates/condition before any lift (even when crane is contractor-owned).</li><li>Return-to-service verification discipline: ensure basic functional checks are completed (and recorded) before handing back to SCADA.</li><li>On Call/standby coordination: ensure fair on-call distribution, clear escalation and response protocol during breakdowns.</li></ul><p><b>PTW / LOTO</b></p><ul><li>Establish and maintain general safety from the system / Lock Out Tag Out (LOTO).</li><li>Support the proper implementation of PTW requirements and safe work execution in the field.</li></ul><p><b>Troubleshooting, Performance Monitoring &amp; Downtime Control</b></p><ul><li>Interpret turbine faults and support troubleshooting to minimize downtime and improve availability.</li><li>Monitor turbine performance and identify recurring issues/potential problems requiring corrective action.</li><li>Support optimization of turbine downtime and service KPIs through better prioritization and execution discipline.</li><li>Follow up MPC recommendations and implement improvement actions to minimize generation losses and enhance plant performance.</li></ul><p><b>Work Management, Documentation &amp; Reporting Quality</b></p><ul><li>Ensure technicians complete all relevant paperwork and system reporting (work orders, checklists, PTWs, reports) with good quality and on time.</li><li>Review and validate WO closure quality (clear problem/cause/action, measurements, parts used, attachments) and coach technicians to improve reporting discipline.</li><li>Maintain service logs and contributes to operational/maintenance reporting as requested by the Site Engineer.</li></ul><p><b>People Supervision &amp; Capability Building</b></p><ul><li>Manage and monitor the performance of direct reports (service technicians) and provide regular feedback, coaching, and guidance.</li><li>Ensure knowledge transfer and continuous guidance of junior technicians and support competence progression.</li><li>Ensure discipline, teamwork, and proper work organization to deliver tasks efficiently and safely.</li><li>Manage daily attendance and work allocation; ensure technicians respect start/finish times, on call readiness, and approved leave plan; report deviations and recurring non-compliance to Site Engineer.</li><li>Ensure full adherence to P&amp;C procedures related to work schedule, shift roster, on-call duty, attendance, leave planning, and recovery days, including timely communication and approval workflow.</li><li>Maintain professional discipline: punctuality, readiness for duty, timely handover, and compliance with site rules and instructions.</li></ul><p><b>Contractor Supervision</b></p><ul><li>Supervise contractors/subcontractors during on-site activities to ensure compliance with HSSE requirements, method statements, quality expectations, and site rules.</li><li>Follow up contractor progress and support field acceptance of completed works with proper evidence/documentation. Procedures, Continuous Improvement</li><li>Assist in the development and improvement of technical and safety procedures for main service activities and contribute to maintaining an updated site procedure library.</li><li>Perform quality audits/inspections on executed work to confirm maintenance is performed diligently and equipment is left in good condition. Tools, Spares &amp; Cross-Functional Coordination</li><li>Ensure proper care of company tools and vehicles and enforce good housekeeping practices.</li><li>Coordinate with storekeeper/procurement/operations for spare parts readiness and required external services to avoid execution delays.</li><li><br></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's in electrical / Electromechanical Engineering (or relevant technical degree)</li><li>5 years experience in wind sector overseeing operation and maintenance.</li><li>Minimum 3 years as Wind Turbine Technician (Vestas V90 experience preferred), including troubleshooting, up-tower repairs, and major component exposure.</li><li>Wind turbine troubleshooting + planned maintenance execution</li><li>MV/HV substation &amp; BoP coordination (switchgear, protection, transformers, MV cables)</li><li>Team leadership, contractor supervision, and safe execution discipline</li><li>Strong reporting, RCA support, and action closure mindset</li><li>Planning, prioritization, and performance-oriented deliver</li><li>Safety leadership &amp; compliance mindset</li><li>Accountability and execution ownership</li><li>Communication and collaboration</li><li>Problem-solving and structured thinking</li><li>Integrity, discipline, and resilience under pressure</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br>Description de l'entreprise<br><br><p><strong>Pourquoi travailler chez Accor ?</strong><br>Nous sommes bien plus qu’un leader mondial. Nous vous accueillons comme vous êtes et vous pouvez trouver le métier et la marque qui correspond à votre personnalité.<br>Nous vous accompagnons dans votre évolution et votre apprentissage au quotidien, nous nous assurons que votre travail apporte du sens à votre vie. Ainsi, durant votre expérience avec nous, vous pouvez explorer les possibilités illimitée du Groupe Accor.<br>En rejoignant Accor, vous écrivez chaque chapitre de votre histoire et ensemble nous pouvons imaginer l’Hôtellerie de demain. Découvrez la vie qui vous attend chez Accor, https://careers.accor.com/.<br><strong>Faites ce que vous aimez, prenez soin du monde qui vous entoure, oser challenger le status quo ! #BELIMITLESS</strong></p><br><br>Description du poste<br><br><p>Rattaché à la directrice Technique, la Coordinatrice Technique a pour mission principale d'Assurer le support administratif, organisationnel et opérationnel du département technique. Elle veille à la bonne coordination des interventions, au suivi des demandes internes, à la gestion documentaire, et à la fluidité des échanges avec les prestataires externes et les autres départements de l’hôtel.</p><br><p><strong>PRINCIPALES MISSIONS</strong></p><br><p><strong>1. Coordination administrative :</strong></p><br><ul><li><p>Réceptionner et traiter les demandes de maintenance transmises par les autres départements</p><br></li><li><p>Tenir à jour les registres d'interventions techniques (préventives et curatives)</p><br></li><li><p>Assurer le suivi des bons de commande, devis, factures et contrats liés aux prestataires techniques</p><br></li><li><p>Planifier les interventions avec les techniciens et/ou les prestataires selon les priorités</p><br></li></ul><p><strong>2. Communication interne et externe :</strong></p><br><ul><li><p>Servir d’interface entre le département technique et les autres services de l’hôtel</p><br></li><li><p>Préparer les reportings hebdomadaires à destination de la Direction Technique</p><br></li><li><p>Participer aux réunions techniques et rédiger les comptes rendus si nécessaire</p><br></li></ul><p><strong>3. Suivi réglementaire et sécurité :</strong></p><br><ul><li><p>Contribuer au suivi des contrôles réglementaires (ascenseurs, extincteurs, équipements de sécurité, etc.)</p><br></li><li><p>Tenir à jour les dossiers liés à la conformité et aux obligations légales</p><br></li><li><p>Archiver les certificats, attestations et documents obligatoires</p><br></li></ul><p><strong>4. Support opérationnel ponctuel :</strong></p><br><ul><li><p>Aider à la coordination logistique lors de projets ou de travaux spécifiques</p><br></li><li><p>Participer à l'élaboration des plannings des techniciens</p><br></li><li><p>S’assurer du bon niveau de stock des consommables techniques</p><br></li></ul><br>Qualifications<br><br><p><strong>PROFIL RECHERCHÉ</strong></p><br><ul><li><p><strong>Formation</strong> : Bac +2 minimum, idéalement en gestion technique, administration ou hôtellerie</p><br></li><li><p><strong>Expérience</strong> : Une première expérience dans un service technique ou administratif est souhaitée</p><br></li><li><p><strong>Compétences techniques</strong> : Bonne maîtrise des outils bureautiques (Excel, Outlook, )</p><br></li><li><p><strong>Qualités personnelles</strong> : Rigueur, sens de l’organisation, autonomie, réactivité, bon relationnel</p><br></li></ul><br>Informations complémentaires<br><br><p><strong>Notre Engagement Diversité &amp; Inclusion :</strong><br>Nous sommes une entreprise inclusive et notre ambition est d’attirer, de recruter, et de promouvoir la diversité des talents.</p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job : <p>As part of its 2026 recruitment plan, SRM-CS is strengthening its technical teams to support infrastructure development and ensure the continuity and performance of public service.</p><br><br><p>Required conditions:</p><br><br><p>Education level: State-recognized Technician diploma in Civil Engineering, Hydraulics, Plumbing, Thermal and Sanitary Installations, Construction Site Manager BTP, or equivalent depending on the position.<br>Professional experience:</p><br><br><p>Experience between 0 and 4 years in the operation of water, sanitation networks, or hydraulic works depending on the position concerned.</p><br><br> <br> Required profile : <p>..</p><br><br> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job : <p>Reporting to the Dams and Underground Structures department, your missions will be:</p><br><br><ul><li>Drawing of plans,</li><li>Drawing of formwork and reinforcement,</li><li>Establishment of work measurements,</li><li>Contribution to the control of work and temporary company facilities,</li><li>Contribution to checking the conformity of the work,</li></ul><p>Novec is committed to promoting diversity in recruitment and preventing all forms of discrimination.&nbsp;</p><br><br> <br> Required profile : <ul><li>Civil engineering technician,</li><li>Experience in ADFER is desired,</li><li>Ability to work independently and in a team;</li><li>Rigor, availability and dynamism,</li><li>Responsiveness and proactivity,</li><li>Team spirit.</li></ul> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Position:</strong> Head of Future Engineering Capability<br><strong>Reference:</strong> TS025<br><strong>Location:</strong> Warrington<br><strong>Arrangement:</strong> Permanent or Contract<br><strong>Work arrangement:</strong> Hybrid, 3 days in the office and 2 days working from home.</p><br><p>NUVIA UK's Technical Services &amp; Consulting department is fast growing with hybrid opportunities available up and down the country. We're striving to create a multidisciplinary team to offer our clients the best range of talent.</p><br><p><strong>BPSS clearance will be required at basic level. Prior clearance will not be transferable.&nbsp;</strong></p><br><p><strong>Role description:</strong></p><br><p>The purpose of the Head of Future Engineering Capability will be to drive the development of the Engineering and Technical Capability across Integrated Project Team.&nbsp; Acknowledging the intent for the business to remain a thin but intelligent and capable client, a structured approach to in-house technical capability, supported by a well-defined delivery supply chain is required.&nbsp; The Head of Future Engineering Capability is therefore responsible for developing and implementing all strategies and plans required to deliver a capable Technical Function.&nbsp; This implies developing and defining schemes for in-house forward-looking technical capability management (in support of an ultimate site licence application) and leading the technical specification of key contracting activities to build the required supply chain to deliver the programme.</p><br><br><p><strong>Key Responsibilities:</strong></p><br><ul><li>Setting the engineering strategy, then developing &amp; implementing the plans/activities required to deliver it that relate to technical capability.</li><li>Establishing the strategy and arrangements that allow the Technical Director to demonstrate the competence of the Technical Team at all times during project delivery, and as supported by key partnerships.</li><li>Specifying the capabilities of the key programme delivery partnerships including the Delivery Partner, Engineering Partner and Constructors.</li><li>Working closely with the other engineering leads to identify the scope of activities that will be delivered by each of the Partners.</li><li>Collaborating with other programme functions in the business to represent the engineering and technical interest in all procurement, commercial and organisational design activities.</li></ul><p><strong>Knowledge, Skills and Experience required:</strong></p><br><ul><li>Significant experience working and leading in a highly regulated industry on complex projects</li><li>A clear ability to set technical strategy and implement tactical solutions</li><li>An understanding of technical concepts, principles, and terminology relevant to the nuclear industry</li><li>Demonstrate familiarity with nuclear industry regulations, standards, and technical documentation best practices</li><li>Good writing and editing skills, with the ability to communicate complex technical information in a clear, accurate, and accessible manner</li><li>Good attention to detail and commitment to producing error-free documentation that meets industry standards</li><li>Strong interpersonal, communication and influencing skills to collaborate effectively with technical and non-technical stakeholders</li></ul><p><br><strong>Qualifications:</strong></p><br><ul><li>Bachelor’s degree in engineering, Science or a Related field, or equivalent experience</li><li>Chartered Member of a relevant technical institution</li><li>Must be able to obtain UK Security Clearance</li></ul><br><p><strong>Employee Staff Benefits:</strong></p><br><ul><li>8.5% Pension Contribution &amp; Life Assurance</li><li>Private Medical Scheme*</li><li>Employee Share Scheme</li><li>Salary Sacrifice Schemes: Electrical Vehicles, Technology and Cycle to Work</li><li>18 Weeks Full Maternity Pay* (+21w SMP)</li><li>25 days holiday (increasing to 28 days after 5 years’ service, 31 days after 10 years’ service)</li><li>Option to buy, sell and carry over up to 5 days annual leave per year</li><li>In partnership with trade unions</li><li>Personal Development &amp; Further Education Support</li><li>Long Service &amp; Recognition Awards</li><li>Free Employee Assistance Programme&nbsp;</li></ul><p>*After 1 year of service.</p><br><p>NUVIA UK - a subsidiary of VINCI construction - is an international company that operates across highly regulated sectors including Civil Nuclear and has a strong presence and history of delivery at nuclear sites in the UK and internationally.</p><br><p>NUVIA UK is a performance-driven company that is committed to the development of its people within a culture of safety, innovation, and excellence.</p><br><p>NUVIA UK is committed towards equality in employment.</p><br> <p><strong>Entity</strong></p><br> <p>NUVIA is a branch of VINCI, the world's largest integrated concessions and construction group. NUVIA is more specifically the nuclear entity of the VINCI Group and is involved in the entire life cycle of nuclear facilities, from new build to decommissioning, maintenance and operation. NUVIA is constantly growing, with more than 2700 employees worldwide. On average, 100 men and women join us every year. Now, more than ever, we are looking for new talent to support the group's growth.</p><br> <br> <br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job : <p>Reporting to the Water Resources Department, your missions will be:</p><br><br><ul><li>Development of GIS maps and database management,</li><li>Ensure the integration of technical characteristics and data into design software,</li><li>Perform quantity take-offs,</li><li>Carry out dimensioning calculations,</li><li>Process collected data for study purposes,</li><li>Produce technical drawings on Autocad.<br>&nbsp;</li></ul> <br> Required profile : <ul><li>Technician in civil engineering / Hydraulics,</li><li>Perfect mastery of ArcGis, Mensura and Autocad,</li><li>Knowledge of hydrology and hydraulics,</li><li>Knowledge of hydraulic structures and hydraulic development techniques,</li><li>Rigor, availability, autonomy and dynamism,</li><li>Responsiveness and ability to make proposals,</li><li>Team spirit.<br>&nbsp;</li></ul> <br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are looking for a highly experienced Senior Customer Service Lead to elevate our customers' experience. We need someone who can not only lead with expertise but also elevate our customer service standards to new heights. This is a strategic and operational leadership position, building, improving, maintaining relationships with internal and external partners are the keys for this role. You will be the champion of internal &amp; external customer care experience, driving service excellence, leading transformation initiatives, and ensuring seamless coordination across Sales, Supply Chain, Logistics, and Operations. This position plays a critical role in shaping the customer journey &amp; delivering exceptional customer care experience Key Responsibilities Customer Service Operations Leadership Daily support to the field associates, technical support, inquiries. Build and maintain strong relationships with field associates. Ensure efficient coordination with Supply Chain, Logistics, Demand planning and Warehouse teams to guarantee smooth order fulfillment. Ensure great coordination with Finance, Credit &amp; Cash Collection team to support the cash flow Optimize workflows to reduce response times, ensure accuracy, and enhance customer satisfaction. Resolve escalated customer issues and complex service challenges. Drive revenue growth within the portfolio managed by the Customer Service team. Contribute to team meetings and business partner meetings Master Data management Account creation &amp; update Pricing maintenance Handle Admin tasks Send Invoicing &amp; POD s mails to a list of Customers Call handlings &amp; support order entry Customer Experience &amp; Continuous Improvement Lead customer business reviews and implement structured feedback loops. Partner with Sales and Business Development teams to support account expansion. Analyze service data to identify trends and opportunities for improvement. Lead continuous improvement initiatives to elevate service reliability and efficiency. Stay updated on best practices, technologies, and tools shaping modern customer service. Seek opportunities to find efficiencies and recommend process improvements Complaint management People Leadership &amp; Development Strengthen cross-functional alignment with Sales, Finance, Product, and Supply Chain teams. Promote professional development, retention initiatives, and team well-being. Effective cooperation with peers Ensure good working relationships with all local members, Role model for behaviors and company values (Leadership Model - Leading to Thrive) Competencies Logistic background Accountability Customer Focus Peer Relationships Problem Solving Drive for Results Time Management Process Management Continuous Improvement Functional and Technical Skills Business Acumen Conflict Handling Self-awareness and development Emotional Intelligence Effective Communication Change Management Approach Analytical skills Requirements Prerequisite: Min 3 years to 5 years of relevant work experience Fluent English Fluent French Strong ERP knowledge Strong Logistics skills Advantage: Previous experience as business sales assistant or Key account specialist.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Prerequisite: Min 3 years to 5 years of relevant work experience Fluent English Fluent French Strong ERP knowledge Strong Logistics skills Advantage: Previous experience as business sales assistant or Key account specialist.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Activities Live an extraordinary and unique adventure within a large industrial group, the agility and autonomy of an SME. Type of contract: Local; Permanent contract. Your role The Purchasing Officer is responsible for managing the company's series supplies and for regularly following up with suppliers. He also manages stock. As a Purchasing Officer, your responsibilities will be as follows*: Guarantee supplies to your internal customers within deadlines and quality standards. Analyze raw material and consumable needs to supply production. Ensure the smooth running of firm and forecast net requirements calculations. Develop and distribute raw material and consumable forecasts to suppliers. Issue, manage, and track firm orders. Ensure supplier management and follow-up (Enter Goods Receipts &amp; Follow up on potential delays). Set and guarantee good stock levels in consultation with the logistics manager (financial objective, production needs, supplier security...). Manage the stock of perishable materials (use-by date analysis &amp; usage). Monitor stock risks &amp; movements according to needs (non-moving/obsolete stock / overstock). Follow up on reception / non-conformance report &amp; invoicing disputes in conjunction with these orders. Know how to manage the technical part (NM) and customer coverage upon request for analysis. Secure materials for the purchase of raw materials for new transfers. Support the quality department for FAI follow-up with suppliers. Lead the treatment of incidents and blocking points (See QRQC UAP). Coordinate the piloting of corrective action plans with suppliers. Work in collaboration with various internal departments, including Purchasing, Technical, Quality, Logistics, Planning &amp; Production/Scheduling. Ensure the maintenance and updating of supplier performance indicators. - Global OTD suppliers HCIM, Stock in Days, - Expiry values / catch-up plan / supplier risks - Supplier delay lines, Follow-up of production shortages, Number of disputes. Perform all tasks within the scope of their functions or at the request of their hierarchical manager. *Non-exhaustive list</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Required skills and knowledge. Hold a Master's degree (Bac+5) in logistics. Have 3 to 4 years of experience in a similar role; experience in aeronautics will be required. Master the essential office tools for their activity (spreadsheet, database, accounting software, etc.) and the company's ERP. Knowledge of the challenges related to transport and logistics. Your interpersonal skills, your curiosity, as well as your ability to be proactive and innovation-oriented will allow you to successfully carry out your missions and thrive in this role. You will evolve in a dynamic and growing environment. You will benefit from the agility and flexibility of an SME combined with the solidity and resources of an international group that has existed for 170 years. You will benefit from a personalized integration program for your arrival, regular training within a group where career development prospects are rich and varied. We are committed to an environmental and societal policy (CSR) in terms of Biodiversity, Diversity &amp; Inclusion, Parenthood, Ethics and Skills Development. We aim for carbon neutrality by 2050 for all our activities. We invest 5% of our turnover, every year for the past 20 years, in innovation for sustainable development.</p><p></p></section>

<p>The purchasing/supply technician works in collaboration with the domain buyers and suppliers in France/Morocco to ensure the correct application and achievement of the objectives of the Purchasing/Supply process.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bac+3 / 4 degree in Purchasing, Supply Chain, Logistics, or Industrial Management.</li><li>First experience in purchasing and/or supply.</li><li>Proficient with IT tools, especially Excel; knowledge of SAP is a plus.</li><li>Rigorous, organized, and responsive, with the ability to manage priorities and ensure reliable portfolio follow-up.</li><li>Recognized for communication skills, sense of service, and ability to work with buyers, suppliers, and various internal departments.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>To ensure that the store is in a safe and secure environment for visitors and co-workers. Also ensure that the property is safeguarded.</p><p>Safeguard the store by regular patrolling and protect company assets. Ensure safety procedures are conformed to (store free of any hazards, fire exits are properly locked, security seals are intact, no obstruction at emergency exits, no smoking the store etc.). Perform general Health, Safety, and Environment (HSE) technician duties to ensure workplace compliance with safety regulations and standards. Maintain high visibility presence to deter illegal actions such as shoplifting, theft and fights. Actively promote the IKEA social and environmental commitment and work with the rest of the team to understand how, together, we can contribute to sustainability. Deliver and coordinate safety training programmes, including Fire Protection System knowledge and Health and Safety at Work. Investigate incidents and near-misses, documenting findings and implementing corrective actions. Be aware of all security related emergency response and follow the policy and procedures. Adhere to IKEA supply chain and security policy, and report to concern manager in case of any identified security breaches.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Previous experience of working in Security.</li><li>SSI &amp; SST and EHS certifications.</li><li>Self-reliant with a proven ability to work as part of a team as well as independently.</li><li>Ability to understand and communicate in English.</li><li>Experience of creating and implementing plans, setting budgets and following up goals.</li><li>Ability to solve problems or find new ways of working by identifying solution sources and/or ideas.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job : <p>Reporting to the Sustainable Development Department, your missions are:</p><br><br><ul><li>To carry out digital mapping using GIS software such as ArcGIS, QGIS, etc.</li><li>To perform technical drawings and plans using CAD (Computer-Aided Design) software such as AutoCAD.</li><li>To manage and maintain geospatial databases, ensuring data quality, integrity, and consistency.</li><li>To collect and integrate geographic data from various sources.</li><li>To perform spatial analyses to meet specific project needs.</li></ul><p>Novec is committed to promoting diversity in recruitment and preventing all forms of discrimination.&nbsp;</p><br><br> <br> Required profile : <ul><li>GIS Technician,</li><li>Practical experience in using GIS software such as ArcGIS, QGIS, etc.</li><li>Proficiency in CAD software such as AutoCAD.</li><li>Knowledge of basic principles of geospatial databases and experience in using them.</li><li>Rigor, availability, autonomy, and dynamism,</li></ul> <br><br> </div>