Production Technician Jobs - Rabat Morocco

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Le/La Technicien(ne) en machines à coudre industrielles est responsable de l’installation, de la maintenance, du diagnostic des pannes et de la réparation des machines à coudre industrielles ainsi que des équipements associés, afin d’assurer le bon fonctionnement et l’efficacité des opérations de production. Ce poste contribue à la performance de la production en réduisant les temps d’arrêt, en optimisant les performances des machines et en garantissant le respect des normes de qualité et de sécurité. The Sewing Machine Technician is responsible for installing, maintaining, troubleshooting, and repairing industrial sewing machines and related equipment to ensure smooth and efficient production operations. The role supports production by minimizing downtime, improving machine performance, and maintaining quality and safety standards. Responsibilities Principales responsabilités Installer, configurer et régler les machines à coudre industrielles et les équipements associés. Effectuer la maintenance préventive conformément aux programmes d’entretien établis. Diagnostiquer les pannes mécaniques, électriques et pneumatiques, puis réaliser les réparations nécessaires. Intervenir rapidement en cas de panne afin de minimiser les interruptions de production. Régler et calibrer les machines pour garantir la qualité des coutures et l’efficacité de la production. Remplacer les pièces usées ou défectueuses telles que les aiguilles, moteurs, courroies, boucleurs et mécanismes d’entraînement. Tenir à jour les dossiers de maintenance, les rapports d’intervention et le suivi de l’utilisation des pièces de rechange. Accompagner les équipes de production dans l’utilisation des machines et le dépannage de premier niveau. Veiller à ce que les équipements fonctionnent conformément aux normes de qualité et de sécurité. Participer aux initiatives d’amélioration continue et de réduction des coûts. Maintenir la propreté des machines et des zones de travail, et assurer leur bonne lubrification. Responsibilities Install, set up, and adjust industrial sewing machines and equipment. Perform preventive maintenance according to maintenance schedules. Diagnose mechanical, electrical, and pneumatic issues and carry out repairs. Troubleshoot machine breakdowns quickly to minimize production downtime. Calibrate machines to ensure proper stitch quality and production efficiency. Replace worn or defective parts such as needles, motors, belts, loopers, and feed mechanisms. Maintain maintenance records, repair logs, and spare parts usage. Support production teams in machine operation and basic troubleshooting. Ensure machines operate according to safety and quality standards. Participate in continuous improvement and cost-reduction initiatives. Maintain cleanliness and proper lubrication of machines and work areas. Qualifications Compétences et aptitudes requises Solide connaissance des machines à coudre industrielles (point noué, surjeteuse, recouvreuse, bartaqueuse, etc.). Compétences en diagnostic et dépannage mécanique ainsi qu’en électricité de base. Capacité à lire et interpréter des manuels techniques et des schémas de machines. Excellentes capacités d’analyse et de résolution de problèmes. Capacité à travailler sous pression et à réagir rapidement en cas de panne. Sens du détail et engagement envers la qualité. Maîtrise des outils informatiques de base pour le reporting de maintenance (la connaissance d’un système GMAO/CMMS constitue un atout). Required Skills &amp; Competencies Strong knowledge of industrial sewing machines (lockstitch, overlock, flatlock, bar-tack, etc.). Mechanical and basic electrical troubleshooting skills. Ability to read technical manuals and machine diagrams. Good problem-solving and analytical skills. Ability to work under pressure and respond quickly to breakdowns. Attention to detail and quality. Basic computer skills for maintenance reporting (CMMS is a plus). Formation et expérience Diplôme ou certificat technique en mécanique, électromécanique ou maintenance industrielle. Expérience de 2 à 5 ans en maintenance de machines à coudre industrielles, idéalement dans l’industrie de l’habillement ou du textile. Une expérience des systèmes de maintenance préventive constitue un avantage. Education &amp; Experience Diploma or Technical Certificate in Mechanical, Electromechanical, or Industrial Maintenance. 2-5 years of experience in sewing machine maintenance, preferably in garment or textile manufacturing. Experience with preventive maintenance systems is an advantage. #LI-AS1 #LI-Onsite</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job : <p>Reporting to the Transport Department, your missions will be:</p><br><br><ul><li>To collect, conduct field surveys, enter and analyze data for study purposes,</li><li>To produce all technical drawings and measurements for projects led by Novec, in accordance with current regulations and standards, meeting the required deadlines, quality, and efficiency, according to study needs,</li><li>To participate in studies and design projects using design software, under the supervision of the project manager.<br>&nbsp;</li></ul><p>Novec is committed to promoting diversity in recruitment and preventing all forms of discrimination.&nbsp;</p><br><br> <br> <br> Required profile : <ul><li>Holder of a specialized technician diploma in civil engineering,</li><li>Practical experience in using AutoCAD,</li><li>Ability to work independently and as part of a team;</li><li>Rigor, availability, and dynamism,</li><li>Responsiveness and initiative,</li><li>Team spirit.</li></ul><br> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company culture : <p><strong>Sorec</strong> is characterized by a <strong>strongly collaborative culture</strong>, where people, trust and employee well-being are central to the organization’s way of working. The company promotes high-quality working relationships, team cohesion and a close, supportive leadership style. This collaborative foundation is complemented by a <strong>moderate innovation focus</strong>, fostering initiative and openness to new ideas. A <strong>structured organizational framework</strong> supports operational efficiency, while competitive performance plays a more limited role. </p><br><br> <br> Job : <p>Reporting to the Operations Department, your main mission will be to provide technical support in various tasks of audiovisual production and realization. As such, your main activities will be:</p><br><br><p>- Ensure the installation, uninstallation, and adjustment of audiovisual equipment;</p><br><br><p>- Carry out routine maintenance and first-level maintenance of audiovisual equipment;</p><br><br><p>- Take charge of sound management, including the use of digital consoles;</p><br><br><p>- Ensure live and delayed production, in accordance with a programming schedule or a script;</p><br><br><p>- Ensure the continuity of shots and avoid continuity errors;</p><br><br><p>- Participate in the choice of shots in coordination with the production team.<br>&nbsp;</p><br><br> <br> <br> Required profile : <p><strong>As a potential candidate:</strong></p><br><br><p>You have a technician or specialized technician diploma in Multimedia, Audiovisual, or equivalent, with a minimum of 2 years of experience in a similar position.</p><br><br><p><strong>&nbsp;Required skills:</strong></p><br><br><p>- You have good knowledge of digital production and broadcast chains.<br>- You master audiovisual capture techniques and the environment of the equine sector.<br>- You have good knowledge of TV production (image, sound, staging).<br>- You master audiovisual and multimedia equipment.<br>- You know the language and all audiovisual professions.<br>- You have the ability to analyze and continuously monitor technical developments in equipment and graphic design software.<br>- You master office software: Microsoft Office.<br>- You have excellent visual culture.<br>- Sense of creativity and fertile imagination.<br>- Sense of commitment, adaptability, initiative, and collaboration.<br>- Sense of communication and interpersonal skills.<br>- Reactivity and team spirit.<br>&nbsp;</p><br><br> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company culture : <p><strong>Sorec</strong> is characterized by a <strong>strongly collaborative culture</strong>, where people, trust and employee well-being are central to the organization’s way of working. The company promotes high-quality working relationships, team cohesion and a close, supportive leadership style. This collaborative foundation is complemented by a <strong>moderate innovation focus</strong>, fostering initiative and openness to new ideas. A <strong>structured organizational framework</strong> supports operational efficiency, while competitive performance plays a more limited role. </p><br><br> <br> Job : <p>Reporting to the Operations Department, your main mission will be to provide technical support in various tasks of audiovisual production and realization. As such, your main activities will be:</p><br><br><p>- Ensure the installation, uninstallation, and adjustment of audiovisual equipment;</p><br><br><p>- Carry out routine maintenance and first-level maintenance of audiovisual equipment;</p><br><br><p>- Take charge of sound management, including the use of digital consoles;</p><br><br><p>- Ensure live and delayed production, in accordance with a programming schedule or a script;</p><br><br><p>- Ensure the continuity of shots and avoid continuity errors;</p><br><br><p>- Participate in the choice of shots in coordination with the production team.<br>&nbsp;</p><br><br> <br> <br> Required profile : <p><strong>As a potential candidate:</strong></p><br><br><p>You have a technician or specialized technician diploma in Multimedia, Audiovisual, or equivalent, with a minimum of 2 years of experience in a similar position.</p><br><br><p><strong>&nbsp;Required skills:</strong></p><br><br><p>- You have good knowledge of digital production and broadcast chains.<br>- You master audiovisual capture techniques and the environment of the equine sector.<br>- You have good knowledge of TV production (image, sound, staging).<br>- You master audiovisual and multimedia equipment.<br>- You know the language and all audiovisual professions.<br>- You have the ability to analyze and continuously monitor technical developments in equipment and graphic design software.<br>- You master office software: Microsoft Office.<br>- You have excellent visual culture.<br>- Sense of creativity and fertile imagination.<br>- Sense of commitment, adaptability, initiative, and collaboration.<br>- Sense of communication and interpersonal skills.<br>- Reactivity and team spirit.<br>&nbsp;</p><br><br> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job : <p>Join a dynamic company in the <strong>Electricity</strong> sector as a <strong>Tooling Technician</strong>. Based in <strong>Casablanca</strong>, this opportunity will allow you to actively contribute to operational excellence. Your <strong>main mission</strong> will be to ensure the maintenance, repair, and optimization of the tooling and equipment used in our processes.</p><br><br><p>The main goal is to guarantee the availability and optimal performance of production tools, in order to support the teams in achieving production, quality, and safety objectives. This involves minimizing unplanned downtime and anticipating maintenance needs.</p><br><br><p>Your days will be structured by various missions, including:</p><br><br><ul><li>Perform <strong>preventive and corrective maintenance</strong> operations on tooling and machinery.</li><li>Diagnose breakdowns and carry out necessary repairs as quickly as possible.</li><li>Participate in the installation and commissioning of new equipment.</li><li>Contribute to the continuous improvement of maintenance and production processes.</li><li>Ensure compliance with <strong>safety</strong> regulations in carrying out your tasks.</li><li>Document the interventions carried out.</li></ul> <br> <br> Required profile : <p>To excel in this role, a <strong>Bac +2</strong> level of education is required. A specialization in <strong>Production</strong>, <strong>Quality</strong>, <strong>Safety</strong>, or <strong>Maintenance</strong> would be a major asset for understanding the technical challenges of our business.</p><br><br><p>Intermediate professional experience in a similar position is sought. This period should have allowed you to develop a solid understanding of issues related to industrial maintenance and tooling.</p><br><br><p>Beyond your education and experience, here are the skills that will make a difference:</p><br><br><ul><li>Mastery of <strong>mechanical and electrical maintenance</strong> techniques.</li><li>Ability to read and interpret <strong>technical drawings</strong>.</li><li>Rigor, autonomy, and organizational skills.</li><li>Good <strong>diagnostic</strong> and problem-solving skills.</li><li>Team spirit and good interpersonal skills.</li><li>Knowledge of safety standards applicable in the electricity sector.</li></ul><p>If you see yourself in this description and are ready to take on this exciting challenge, don't wait any longer! Apply now using the button below "Send my CV to the recruiter" to join our team.</p><br><br> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company culture : <p><strong>Manpower Agences</strong> operates within a highly balanced culture, where <strong>collaboration</strong> plays a key role in the work environment. The company values close leadership, trust and collective engagement, while placing equal importance on <strong>performance</strong> and achieving results. This dynamic is supported by a <strong>structured organizational approach</strong>, promoting rigor, efficiency and quality execution. Openness to innovation further strengthens this balance, supporting adaptability in an evolving market. </p><br><br> <br> Job : <p>Join a dynamic company in the <b>Pharmaceutical / Health</b> sector as a <b>pharmaceutical technician in compression and mixing</b>. This position is based in <b>Casablanca/Bouskoura</b>, offering a key opportunity to develop your career in a stimulating environment.</p><br><br><p>Actively contribute to the production of high-quality medicines by ensuring the proper execution of compression and mixing processes. Your role will be essential to guarantee compliance with standards and meet production requirements.</p><br><br><p>The main tasks include:</p><br><br><ul><li>Operate <b>compression</b> and <b>mixing</b> equipment according to established procedures.</li><li>Participate in the preparation of raw materials for the different manufacturing stages.</li><li>Perform first-level quality controls to ensure product compliance.</li><li>Strictly adhere to <b>Good Manufacturing Practices</b> (GMP) and hygiene and safety rules.</li><li>Collaborate effectively with production teams to optimize workflows and resolve technical issues.</li><li>Ensure <b>first-level maintenance</b> of the equipment under your responsibility.</li></ul> <br> <br> Required profile : <p>A <b>Bac +2 level</b> (equivalent to a 2-year college degree) education is required, ideally in the field of <b>Health / Social professions</b> or a related technical field.</p><br><br><p>Professional experience of <b>1 to 3 years</b> in a similar role is expected. Initial experience in the pharmaceutical production environment will be an asset.</p><br><br><p>To excel in this role, you will need to demonstrate:</p><br><br><ul><li>A good understanding of pharmaceutical manufacturing processes, especially <b>compression</b> and <b>mixing</b>.</li><li>Great rigor and a strong sense of <b>organization</b>.</li><li>The ability to work in a team and communicate effectively.</li><li>Compliance with <b>safety</b> and <b>hygiene</b> regulations.</li><li>An aptitude for solving simple technical problems.</li><li>Knowledge of <b>Good Manufacturing Practices</b> is a plus.</li></ul><p>If you recognize yourself in this description and wish to give a new boost to your career, do not wait to apply!</p><br><br> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job : <p>We are looking for a Maintenance Technician to join our team. This position involves carrying out preventive and corrective maintenance on industrial equipment, as well as optimizing production processes. The technician will work in a dynamic and demanding environment to ensure the operational continuity of the facilities.</p><br><br><p>Missions:</p><br><br><p>Ensure preventive and corrective maintenance of industrial machines and equipment.<br>Diagnose and quickly resolve breakdowns to minimize production downtime.<br>Participate in the installation, commissioning, and calibration of new facilities.<br>Track and update technical documentation and intervention reports.<br>Collaborate with production teams to optimize processes and ensure operational quality.</p><br><br> <br> <br> Required profile : <p>This Maintenance Technician position requires an experienced candidate, capable of effectively managing equipment maintenance and solving technical problems while ensuring compliance with current standards.</p><br><br><p>Profile:</p><br><br><p>Education: Bac+2 or higher.<br>Type of Bac: Technical.<br>Degree: BTS, DUT, Bachelor's, or Master's.<br>Experience: More than 4 years of experience in industrial or technical maintenance.<br>Age: Under 30 years old.<br>Qualifications and skills:</p><br><br><p><br>Technical Skills:</p><br><br><p>Electrical engineering.<br>Power electronics.<br>Automation.<br>Hydraulics and pneumatics.<br>Industrial maintenance.</p><br><br><p><br>Soft Skills:</p><br><br><p>In-depth knowledge of equipment and production processes.<br>Ability to quickly diagnose and repair technical breakdowns.<br>Team spirit and good communication skills.<br>Proficiency in maintenance tools and software.</p><br><br> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job : <p>Join a major player in the <strong>electricity</strong> sector and contribute to the smooth running of our facilities as a <strong>Maintenance Technician for Tools</strong> in <strong>Casablanca</strong>. Your role will be essential to ensure the performance and reliability of our equipment.</p><br><br><p>The main goal of this position is to ensure the <strong>preventive and corrective maintenance</strong> of tools, thus guaranteeing their <strong>operational availability</strong> and the <strong>safety</strong> of those involved. You will actively participate in the continuous improvement of maintenance processes.</p><br><br><p>Your main tasks will include:</p><br><br><ul><li>Perform first-level maintenance operations on tools.</li><li>Follow the preventive maintenance plan and suggest improvements.</li><li>Fill in intervention reports and maintenance indicators.</li></ul><p>You will work closely with production teams to minimize downtime.</p><br><br> <br> <br> Required profile : <p>To excel in this role, a <strong>Bac +2 diploma</strong> is required, ideally in the field of <strong>production, quality, safety, or maintenance</strong>.</p><br><br><p><strong>1 to 3 years of professional experience</strong> in a similar position is desired. This experience will have allowed you to develop a good understanding of the challenges of industrial maintenance.</p><br><br><ul><li>Proficiency in diagnostic and repair techniques for tools.</li><li>Good knowledge of electricity and mechanics.</li><li>Ability to read and interpret technical diagrams.</li><li>Rigor, autonomy, and organizational skills.</li><li>Team spirit and good communication skills.</li><li>Knowledge of current safety standards in the electricity sector.</li></ul><p>If you are passionate about technology and want to grow in a stimulating environment, your profile interests us.</p><br><br> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><b>Join Yazaki. Connect to the future.&nbsp;</b></p><br> <p><b>Country</b>:&nbsp;Morocco (MA)&nbsp;<br> <b>City</b>:&nbsp;Tangier<br> <b>Worksite / Location</b>:&nbsp;Tanger Plant&nbsp;</p><br> <p><b>Job Function</b>:&nbsp;CFO_IT&nbsp;<br> <b>Job Discipline</b>:&nbsp;&nbsp;<br> <b>Job Family</b>:&nbsp;Infrastructure</p><br> <p>Founded in 1929, Yazaki is a Japanese full systems supplier of wire harness, electrical, data products and solutions enabling vehicle electrification, connectivity, and autonomy integration. More than 235,000 committed and highly motivated employees in 45 countries make us one of the most successful international automotive suppliers. Join a family-owned company committed to being environmentally friendly in every aspect of its business, contributing to society, and inspiring trust. To strengthen our team, we are looking for a&nbsp;IT Technician L2 in our plant in [[location]].</p><br> <p><strong><span>Qualifications:</span></strong></p><br> <ul> <li>Bac +2 / Bac +3 diploma in IT, Computer Networks, Systems Administration, or equivalent.</li> <li>Minimum 2 years of experience in IT support, network support, or industrial IT environment.</li> <li>Good knowledge of networking basics: LAN/WAN, TCP/IP, DNS, DHCP, VLANs, routing, and switching.</li> <li>Experience with network equipment such as switches, routers, access points, and firewalls.</li> <li>Good troubleshooting skills for network, connectivity, hardware, and software incidents.</li> <li>Experience with Windows operating systems, Microsoft Office, and basic endpoint support.</li> <li>Basic knowledge of Active Directory, user accounts, permissions, and group policies.</li> <li>Experience supporting printers, scanners, thin clients, laptops, desktops, and shop floor devices.</li> <li>Ability to perform preventive maintenance and monitor IT infrastructure.</li> <li>Basic understanding of cybersecurity rules, access control, and IT security best practices.</li> <li>Ability to document technical actions, update network diagrams, and follow IT procedures.</li> <li>Experience using ticketing tools such as ServiceNow or similar ITSM platforms is a plus.</li> <li>Good communication skills in French and English.</li> <li>Ability to work under pressure and respond quickly to production-impacting issues.</li> <li>Team spirit, autonomy, discipline, and strong sense of responsibility.</li> <li>Previous experience in an automotive or manufacturing environment is a strong plus.</li> <li> <p><strong><span>Key Responsibilities:</span></strong></p><br> <ul> <li>Provide first and second-level IT support to users across all departments.</li> <li>Install, configure, maintain, and troubleshoot IT equipment such as desktops, laptops, printers, scanners, and peripherals.</li> <li>Support hardware, software, network, and application-related incidents.</li> <li>Manage and resolve IT support tickets within SLA deadlines, escalating issues when required.</li> <li>Ensure quick first-response support for production-impacting incidents.</li> <li>Monitor the status of IT systems, computers, printers, and network equipment.</li> <li>Support network connectivity troubleshooting: LAN, Wi-Fi, IP configuration, DNS, DHCP, and VLAN-related issues.</li> <li>Ensure compliance with Yazaki IT standards, security rules, and plant procedures.</li> <li>Coordinate with internal IT teams, vendors, and other departments for issue resolution.</li> <li>Support shop floor IT devices and ensure minimum downtime for production areas.</li> <li>Participate in preventive maintenance and continuous improvement of IT services.</li> </ul> </li> </ul><p>At Yazaki, we are&nbsp;committed to providing equal employment opportunities for everyone which extends to all aspects of the employment relationship.&nbsp;</p><br> <p>We are looking forward to receiving&nbsp;your application and to get to know you. Please apply by clicking the 'Apply Now' button. We wish you all the success in your application!&nbsp;</p><br> <p>Ps. Didn't find&nbsp;what you are looking for?<br> Take a look at our&nbsp;careers page! Be careful though, you might find your next dream job.&nbsp;</p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><b>Lear For You</b> <br> </span><p>We work hard for the people who work for us. We champion our teams and foster collaboration, inclusion, respect and excellence. Because <strong>we want to be more for you.</strong></p><br> <p>A path to a better career. A better future.</p><br> <p>Our teams have invented groundbreaking technologies, manufactured millions of products and earned a long list of awards. Year after year, we’re named one of the World’s Most Admired Companies.</p><br> <p>They’re the secret to our success—empowered, inventive and inclusive. Passionate about their craft. Driven to succeed. Because we win together.</p><br> <p>Are you ready for a better career? A better future?</p><br><br><br><b>Job Description</b> <br><p>Attached to the APQP coordinator, the quality technician is expected to:</p><br> <ul> <li>Ensure compliance with quality and customer requirements while overseeing the production process in accordance with customer and quality requirements.</li> <li>Day-to-day management of quality tasks, including monitoring the status of new project launches</li> <li>Ensure that measuring instruments are calibrated and that the validation process is followed.</li> <li>Ensure that required pre-startup checks are performed and monitored</li> </ul><br><br><b>Responsibilities</b> <br><ul> <li>Analysis of product drawings to prepare the list of special characteristics</li> <li>Definition of the measurement equipment required for the list of special characteristics, in collaboration with the engineering and laboratory teams</li> <li>Preparation of the quality documentation required for startup: Quality QIP, Quality Wall QIP, and Operator QIP, based on the control plan defined by the APQP engineer</li> <li>Participate in the development of the PFMEA and Control Plan</li> <li>Perform daily production monitoring during the project phase</li> <li>Measure injection-moulded parts against the drawing and approve their dimensions during the project phase</li> <li>Participate in process approval meetings</li> <li>Participate in the development of the lab-based PPAP (Production Part Approval Process)</li> <li>Halt production if necessary or ensure containment to protect the customer in the event of a quality defect.</li> <li>Ensure compliance with customer recommendations and monitor specific characteristics.</li> <li>Ensure compliance with quality, safety, and environmental standards.</li> </ul><br><br><b>Skills</b> <br>Quality Improvement<br>Product Quality (QA/QC)<br>Advanced Product Quality Planning<br>Complex Problem Solving<br>Eight Disciplines Problem Solving (8D)<br>Troubleshooting (Problem Solving)<br>Engineering Drawings<br><br><br><b>Education Requirements</b> <br><p>BAC + 2 in industrial engineering or similar</p><br><br><br><b>Experience Requirements</b> <br> <p>At least 2 years of experience within the automotive industry</p><br> <br><br><br><b>Certifications / Licenses</b> <br><p>NA</p><br><br><br><b>Languages</b> <br><p><span><strong>French:</strong> Professional proficiency</span></p><br> <p><span><strong>English:</strong> Intermediate proficiency</span></p><br><br><br><b>Equal Opportunity Employer</b> <br> <p><span><em>Lear Corporation is committed to fair, merit‑based employment practices and equal opportunity.</em></span></p><br> <p><span><em>We provide reasonable accommodations in accordance with applicable law. For assistance during the application process, contact your recruiter directly.</em></span></p><br> <p><em><span>Applicants must submit their resume for consideration using our applicant tracking system. Due to the high volume of applications received, only candidates selected for interviews will be contacted. Candidates must be legally authorized to work in the country where the position is located. Unsolicited resumes from search firms, employment agencies, or similar, will not be paid a fee and will become the property of Lear Corporation.</span></em></p><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company culture : <p><strong>Cosumar</strong> is characterized by a corporate culture centered on <strong>collaboration</strong>, where human relationships, teamwork and employee support play an important role. This collaborative approach is reinforced by a strong <strong>organizational</strong> dimension, ensuring rigor, efficiency and process reliability. The company also values <strong>performance</strong> and goal achievement, while maintaining openness to <strong>innovation</strong> and continuous improvement. This balance fosters a structured, people-oriented and progress-driven work environment. </p><br><br> <br> Job : <p>Join a dynamic company in the Agri-food sector as a <strong>PROCESS TECHNICIAN</strong> at one of our sites located in the <strong>Loukkos</strong> region. This is a unique opportunity to actively contribute to production processes in a stimulating environment.</p><br><br><p>Your role will be essential in optimizing manufacturing processes, ensuring product compliance, and adhering to safety standards. The goal is to guarantee efficient, high-quality production.</p><br><br><p>Your main tasks will include:</p><br><br><p>Ensuring maintenance of technological equipment:<br>• Prepare the maintenance program considering the pre-established maintenance plan and analysis of<br>past breakdowns during the campaign<br>• Open, dismantle, and diagnose equipment and establish the list of spare parts needed for interventions<br>• Check the availability of spare parts in coordination with the storekeeper and act accordingly<br>• Ensure the maintenance program is carried out within the deadlines<br>• Propose improvement actions to the line manager and implement validated actions<br>• Support external service providers in carrying out outsourced maintenance work<br>• Prepare the weekly progress report of the work and send it to the line manager<br>Perform and/or participate in tests:<br>• Participate in mechanical tests of equipment and ensure work is done to remove reservations made by the testing committee<br>• Perform hot tests of the station, check interlocks, and correct any malfunctions<br>Campaign:<br>Configure the station's equipment according to operational requirements and management instructions<br>• Prepare and commission the station's equipment in coordination with the power plant and the distribution station<br>Operate the drying and pelletizing station:<br>• Prepare your workstation and familiarize yourself with operating and maintenance instructions<br>• Monitor the process parameters and act appropriately<br>• Consult laboratory analysis results and act accordingly<br>• Start and monitor the cleaning operation of the relevant machines.<br>• Complete tracking forms<br>• Inform management of any significant events related to the station's operation<br>• At the end of the campaign, clean and preserve the equipment<br>Monitor the proper functioning of equipment:<br>Perform rounds to check the proper functioning of equipment and notify the relevant maintenance department in case of malfunction<br>• Monitor the smooth running of the packaging operation<br>• Perform maintenance tasks that are your responsibility (lubrication, oil level, etc.)<br>Prevent HSE risks in your activities:<br>• Participate in identifying risks in your work area<br>• Observe prescribed precautions and protections<br>• Apply standards in every action<br>Participate in continuous improvement projects:<br>• Ensure optimization and achievement of energy consumption objectives<br>• Conduct briefing and debriefing meetings with the line manager<br>• Propose improvement actions to the line manager for validation and implement validated actions </p><br><br> <br> <br> Required profile : <p>You have a Bac+2/3 level education in process engineering, electromechanics, or equivalent.</p><br><br><p>Internship experience in a similar role is required, ideally in the agri-food sector or heavy industry.</p><br><br><p>If you see yourself in this profile and are ready to take on this challenge, do not hesitate to apply quickly using the button "Send my CV to the recruiter" below.</p><br><br> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job : The metallurgy technician supports the metallurgy team by organizing and executing plant sampling campaigns, conducting laboratory-scale tests, and optimizing plant performance. They ensure the proper functioning of plant process analyzers and perform regular equipment inspections.<br>The metallurgy technician undertakes specific projects to improve the performance of production plants. They collaborate with other plant departments to ensure safe plant operation, as well as with mining and geological groups to ensure production targets are met.<br>&nbsp;<br><u><strong>Main responsibilities:</strong></u><br><ul><li>Operational excellence in the metallurgy of grinding and refinery processes.</li><li>Participate in plant metallurgical process activities, including sampling, analysis, testing, circuit performance, and metallurgical accounting.</li><li>Plan and execute laboratory-scale test work; prepare concise test work reports with results.</li><li>Analyze and interpret metallurgical and process data to ensure alignment with operational objectives.</li><li>Investigate whether the methods used are the most efficient, safe, and environmentally acceptable.</li><li>Plan and coordinate plant sampling campaigns.</li><li>Prepare reports and written documents related to technical recommendations and improvements in plant operations.</li><li>Ensure safe, efficient, and accurate operation of online analyzers and samplers throughout the process.</li><li>Participate in the development and review of procedures and in the analysis of occupational risks.</li><li>Complete analysis and inspections of critical plant equipment during planned shutdowns.</li></ul><p><strong>Location:</strong> Zgounder Mine, Askaoun Municipality, Taliouine Circle, Taroudant Province.</p><br><br><br> <br> <br> Required profile : <ul><li>Hold a DUT or Bachelor's degree in mining engineering, concentration in valorization, materials and metallurgy engineering, process engineering, or equivalent, with 1 year of experience.</li><li>Technical knowledge and experience in ore processing;</li><li>Ability to identify and diagnose problems encountered in the different stages of the process; Excellent analytical, synthesis, and communication skills;</li><li>1 year or more of experience in ore processing, crushing, grinding, cyanidation, flotation, and filtration is an asset.</li><li>Bilingualism essential (French and English).</li></ul><p><u><strong>DESIRED SKILLS:</strong></u></p><br><br><ul><li>Strong commitment to respecting health, safety, and environmental rules and guidelines;</li><li>Willingness to work in a multicultural environment and within a multicultural team;</li><li>Excellent skills for developing and maintaining good interpersonal relationships; Possess organizational and communication skills;</li><li>General desired attitudes: dynamic, autonomous, positive, flexible, versatile, and a strong sense of work organization;</li><li>Ability to work in a team and effectively manage a project;</li><li>Ability to work under pressure.</li></ul> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span>With our strong investment in research and development and our culture of continuous improvement, Hexcel is the industry leader in the manufacturing of advanced lightweight composite materials, including carbon fiber, woven reinforcements, resins, prepregs, honeycombs and engineered core and composite structures. We invite you to join the Hexcel team at various manufacturing sites, sales offices and R&amp;D centers around the globe. Become a part of the “strength within.”</span></p><br><p><span>Hexcel is currently seeking a <b>Manufacturing Engineering Technician </b>for our <b>Casablanca, Morocco</b> location.</span></p><br><p><b><span>The selected individual will be responsible for but not limited to the following obligations:</span></b></p><br><ul><li><p><span>Provide technical support to production by troubleshooting and resolving manufacturing and process-related issues.</span></p><br></li><li><p><span>Monitor manufacturing process performance and identify opportunities to improve efficiency, quality, and process stability.</span></p><br></li><li><p><span>Support the implementation of process changes, engineering improvements, and corrective actions in collaboration with Manufacturing Engineers.</span></p><br></li><li><p><span>Maintain and update manufacturing documentation to ensure accuracy, compliance, and alignment with operational requirements.</span></p><br></li><li><p><span>Support new product introductions, manufacturing process transfers, and other industrialization activities.</span></p><br></li><li><p><span>Assist in equipment qualification, process validation, and process capability studies to ensure robust manufacturing performance.</span></p><br></li><li><p><span>Create and maintain Work Instructions, Process Flow Diagrams, Manufacturing Routes, Bills of Materials (BOMs), and other manufacturing documentation.</span></p><br></li><li><p><span>Participate in Lean Manufacturing, Kaizen, and 5S initiatives to drive continuous improvement and operational excellence.</span></p><br></li><li><p><span>Conduct cycle-time analyses, identify productivity improvement opportunities, and support waste reduction and cost optimization initiatives.</span></p><br></li><li><p><span>Collaborate closely with Production, Quality, Maintenance, Supply Chain, EHS, and Program Management teams to achieve Safety, Quality, Delivery, and Cost (SQDC) objectives while ensuring compliance with customer and regulatory requirements.</span></p><br></li></ul><p><b><span>Qualifications:</span></b></p><br><ul><li><p>Technician Diploma or bachelor’s degree in industrial engineering, Mechanical Engineering or a related engineering field.</p><br></li><li><p>1 to 3 years of experience in aerospace, composites, or a manufacturing environment.</p><br></li><li><p>Experience in process improvement, industrialization activities, and production support is preferred.</p><br></li><li><p>Knowledge of composite manufacturing processes is considered an asset.</p><br></li><li><p>Good proficiency in both English and French, with strong written and verbal communication skills.</p><br></li><li><p>Strong analytical and problem-solving skills with the ability to identify and implement effective solutions.</p><br></li><li><p>Strong organizational skills and attention to detail, with the ability to manage multiple priorities effectively.</p><br></li></ul><p><span>Candidates must be eligible to work in the country where the position is based. Hexcel (NYSE: HXL) is a global leader in advanced composites technology, a leading producer of carbon fiber, and the world leader in honeycomb manufacturing for the commercial aerospace industry.</span></p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><b>Join Yazaki. Connect to the future.&nbsp;</b></p><br> <p><b>Country</b>:&nbsp;Morocco (MA)&nbsp;<br> <b>City</b>:&nbsp;Tangier<br> <b>Worksite / Location</b>:&nbsp;Tanger Plant&nbsp;</p><br> <p><b>Job Function</b>:&nbsp;EDS_Manufacturing (PP/IE)&nbsp;<br> <b>Job Discipline</b>:&nbsp;&nbsp;<br> <b>Job Family</b>:&nbsp;Production Preparation/Industrial Engineering (PL)</p><br> <p>Founded in 1929, Yazaki is a Japanese full systems supplier of wire harness, electrical, data products and solutions enabling vehicle electrification, connectivity, and autonomy integration. More than 235,000 committed and highly motivated employees in 45 countries make us one of the most successful international automotive suppliers. Join a family-owned company committed to being environmentally friendly in every aspect of its business, contributing to society, and inspiring trust. To strengthen our team, we are looking for a&nbsp;P1P2 Technician Level 1 in our plant in [[location]].</p><br> Qualifications: <ul> <li>Science or technical baccalaureate +2 years.</li> <li>Three years of experience in the position.</li> <li>Language skills: Good level of French and English;</li> </ul> Key Responsibilities: <p>At Yazaki, we are&nbsp;committed to providing equal employment opportunities for everyone which extends to all aspects of the employment relationship.&nbsp;</p><br> <p>We are looking forward to receiving&nbsp;your application and to get to know you. Please apply by clicking the 'Apply Now' button. We wish you all the success in your application!&nbsp;</p><br> <p>Ps. Didn't find&nbsp;what you are looking for?<br> Take a look at our&nbsp;careers page! Be careful though, you might find your next dream job.&nbsp;</p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><b>Join Yazaki. Connect to the future.&nbsp;</b></p><br> <p><b>Country</b>:&nbsp;Morocco (MA)&nbsp;<br> <b>City</b>:&nbsp;Kenitra<br> <b>Worksite / Location</b>:&nbsp;Kenitra Plant 1&nbsp;</p><br> <p><b>Job Function</b>:&nbsp;EDS_Manufacturing (Technical Dep)&nbsp;<br> <b>Job Discipline</b>:&nbsp;&nbsp;<br> <b>Job Family</b>:&nbsp;Technical Services (PL)</p><br> <p>Founded in 1929, Yazaki is a Japanese full systems supplier of wire harness, electrical, data products and solutions enabling vehicle electrification, connectivity, and autonomy integration. More than 235,000 committed and highly motivated employees in 45 countries make us one of the most successful international automotive suppliers. Join a family-owned company committed to being environmentally friendly in every aspect of its business, contributing to society, and inspiring trust. To strengthen our team, we are looking for a&nbsp;Maintenance Technician L2 in our plant in [[location]].</p><br> <p><strong><u><span>Qualifications:</span></u></strong></p><br> <ul> <li><strong><span>Level of studies:</span></strong><span>&nbsp;Bac+2 with the following specialties: mechanical , electrical. Electromechanical, automatization .</span></li> <li><strong><span>Experience:</span></strong><span>&nbsp; Beginner or with experience in industrial sector</span></li> <li><strong><span>Language</span></strong><span>: Good level of English and French .</span></li> <li><strong><span>Soft skills:&nbsp;</span></strong><span>analysis tools , Microsoft office(excel , power point , word&nbsp;</span></li> </ul> <p><strong><u><span>Attributions &amp; Tasks:</span></u></strong></p><br> <ul> <li><span>Ensure the good operation of the machines in the appropriate area.</span></li> <li><span>Repairing breakdowns during production.</span></li> <li><span>Execution of preventive maintenance on equipment in the appropriate area.</span></li> <li><span>Ensure and verify the correct operation of the protection systems of all the machines</span></li> </ul> <p>At Yazaki, we are&nbsp;committed to providing equal employment opportunities for everyone which extends to all aspects of the employment relationship.&nbsp;</p><br> <p>We are looking forward to receiving&nbsp;your application and to get to know you. Please apply by clicking the 'Apply Now' button. We wish you all the success in your application!&nbsp;</p><br> <p>Ps. Didn't find&nbsp;what you are looking for?<br> Take a look at our&nbsp;careers page! Be careful though, you might find your next dream job.&nbsp;</p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><b>Join Yazaki. Connect to the future.&nbsp;</b></p><br> <p><b>Country</b>:&nbsp;Morocco (MA)&nbsp;<br> <b>City</b>:&nbsp;Kenitra<br> <b>Worksite / Location</b>:&nbsp;Kenitra Plant 1&nbsp;</p><br> <p><b>Job Function</b>:&nbsp;EDS_Manufacturing (PP/IE)&nbsp;<br> <b>Job Discipline</b>:&nbsp;&nbsp;<br> <b>Job Family</b>:&nbsp;Production Preparation/Industrial Engineering (PL)</p><br> <p>Founded in 1929, Yazaki is a Japanese full systems supplier of wire harness, electrical, data products and solutions enabling vehicle electrification, connectivity, and autonomy integration. More than 235,000 committed and highly motivated employees in 45 countries make us one of the most successful international automotive suppliers. Join a family-owned company committed to being environmentally friendly in every aspect of its business, contributing to society, and inspiring trust. To strengthen our team, we are looking for a&nbsp;IE/PP Technician L1 (WC) in our plant in [[location]].</p><br> <p><strong><u><span>Qualifications:</span></u></strong></p><br> <ul> <li>Level of studies: Bachelor’s degree or Bac+Diploma in Industrial Engineering, a technical field, or an equivalent</li> <li>Experience: Minimum of 1 years of experience in automotive or similar area.</li> <li>Language: Fluent speaker of French and English</li> </ul> <p><strong><u><span>Responsibility</span></u></strong></p><br> <ul> <li>Ensure deliverance of technical documents at time.</li> <li>Study the specifications of the Costumer and YAZAKI drawings.</li> <li>Propose improvements to the product and the assembly process P3.</li> <li>Analysis of engineering changes and implementation monitoring.</li> <li>Participate in the costing of the ECRs and respect the response time.</li> <li>Provide production training on changes and new products</li> </ul><p>At Yazaki, we are&nbsp;committed to providing equal employment opportunities for everyone which extends to all aspects of the employment relationship.&nbsp;</p><br> <p>We are looking forward to receiving&nbsp;your application and to get to know you. Please apply by clicking the 'Apply Now' button. We wish you all the success in your application!&nbsp;</p><br> <p>Ps. Didn't find&nbsp;what you are looking for?<br> Take a look at our&nbsp;careers page! Be careful though, you might find your next dream job.&nbsp;</p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><b>Join Yazaki. Connect to the future.&nbsp;</b></p><br> <p><b>Country</b>:&nbsp;Morocco (MA)&nbsp;<br> <b>City</b>:&nbsp;Kenitra<br> <b>Worksite / Location</b>:&nbsp;Kenitra Plant 1&nbsp;</p><br> <p><b>Job Function</b>:&nbsp;EDS_Manufacturing (Technical Dep)&nbsp;<br> <b>Job Discipline</b>:&nbsp;&nbsp;<br> <b>Job Family</b>:&nbsp;Technical Services (PL)</p><br> <p>Founded in 1929, Yazaki is a Japanese full systems supplier of wire harness, electrical, data products and solutions enabling vehicle electrification, connectivity, and autonomy integration. More than 235,000 committed and highly motivated employees in 45 countries make us one of the most successful international automotive suppliers. Join a family-owned company committed to being environmentally friendly in every aspect of its business, contributing to society, and inspiring trust. To strengthen our team, we are looking for a&nbsp;Maintenance Technician L2 in our plant in [[location]].</p><br> Area of responsibility Detailed description of main activities <br> P2-P3 Area Observe, listen, touch, smell: all the senses of a maintenance technician must be alert to anticipate malfunctions.<br>Analyze, diagnose the causes, and find solutions to malfunctions.<br>Independently perform all preventive maintenance actions aimed at preventing failures and all corrective maintenance actions to restore initial operation.<br>Modify or improve the reliability of equipment to facilitate maintenance operations or enhance its performance.<br>Ensure that production processes operate flawlessly.<br>Write reports related to interventions.<br>Productivity gains through improvement actions to increase the availability, reliability, or maintainability of equipment. <br> P2-P3 Area /• Ensure the respect of the QMS expectations&nbsp; (IATF 16949), the applications of procedures YEL/YMK, the applications of all work standards and rules related to the EHS&nbsp; (ISO 14001 &amp; OHSAS 18001) and the&nbsp; 5S.<br>/• Ensure the respect of the customer specifications (CSR) <br> <p>At Yazaki, we are&nbsp;committed to providing equal employment opportunities for everyone which extends to all aspects of the employment relationship.&nbsp;</p><br> <p>We are looking forward to receiving&nbsp;your application and to get to know you. Please apply by clicking the 'Apply Now' button. We wish you all the success in your application!&nbsp;</p><br> <p>Ps. Didn't find&nbsp;what you are looking for?<br> Take a look at our&nbsp;careers page! Be careful though, you might find your next dream job.&nbsp;</p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company culture : <p><strong>Cosumar</strong> is characterized by a corporate culture centered on <strong>collaboration</strong>, where human relationships, teamwork and employee support play an important role. This collaborative approach is reinforced by a strong <strong>organizational</strong> dimension, ensuring rigor, efficiency and process reliability. The company also values <strong>performance</strong> and goal achievement, while maintaining openness to <strong>innovation</strong> and continuous improvement. This balance fosters a structured, people-oriented and progress-driven work environment. </p><br><br> <br> Job : <p>Within a leading company in the <strong>agri-food</strong> sector, based in <strong>Sidi Bennour</strong>, an exciting opportunity has arisen for an <strong>Electrical and Automation Maintenance Technician</strong>. Join a dynamic team and contribute to operational excellence in a stimulating environment.</p><br><br><p>Your role will be essential in ensuring the reliability and performance of industrial facilities. You will carry out preventive and corrective maintenance of electrical and automated equipment, thereby minimizing production downtime and optimizing processes.</p><br><br><p>Your main tasks will include: Performing maintenance on control and command equipment:</p><br><br><p>•Carry out maintenance tasks on regulation equipment according to the preventive maintenance plan</p><br><br><p>•Participate in diagnosing regulation equipment and instruments to locate causes of breakdowns</p><br><br><p>•Perform necessary corrective maintenance interventions</p><br><br><p>•Update the backlog of maintenance work for control and command equipment</p><br><br><p>•Assist service providers in carrying out their maintenance work</p><br><br><p>•Prepare intervention reports (internal and subcontracted) carried out during their shift and submit them to the line manager</p><br><br><p>•Perform rounds to check the proper functioning of regulation equipment</p><br><br><p>•Attend sector meetings</p><br><br><p>•Wire measurement instruments and valves with PLCs (Programmable Logic Controllers)</p><br><br><p>•Calibrate plant measurement instruments and regulation valves (laboratory control instruments (sugar factories))</p><br><br><p>•Program PLCs and DCS (Digital Control System)•Check PID (Proportional Integral Derivative) parameters of regulation loops and update them as needed</p><br><br><p>Prepare equipment and assist with plant equipment start-up and act in case of malfunction</p><br><br><ul><li>Apply and participate in the development of operational standards</li><li>Prevent HSE risks in carrying out their activities:<br>•Participate in identifying risks in their work area<br>•Apply HSE standards and rules in every actionParticipate in continuous improvement projects:</li><li>•Propose improvement actions within their scope of activity<br>•Participate in improvement projects</li><li>Participate in cross-functional projects</li></ul> <br> Required profile : <p>You have a Bac+2/3 level education in automated systems electromechanics (ESA), industrial automation and instrumentation (AII), or equivalent</p><br><br><p>Experience as an intern in a similar position is required, ideally in the agri-food sector or heavy industry.</p><br><br><p>If you recognize yourself in this profile and are ready to take on this challenge, do not hesitate to apply quickly using the button "Send my CV to the recruiter" below.</p><br><br> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><b>Lear For You</b> <br> </span><p>We work hard for the people who work for us. We champion our teams and foster collaboration, inclusion, respect and excellence. Because <strong>we want to be more for you.</strong></p><br> <p>A path to a better career. A better future.</p><br> <p>Our teams have invented groundbreaking technologies, manufactured millions of products and earned a long list of awards. Year after year, we’re named one of the World’s Most Admired Companies.</p><br> <p>They’re the secret to our success—empowered, inventive and inclusive. Passionate about their craft. Driven to succeed. Because we win together.</p><br> <p>Are you ready for a better career? A better future?</p><br><br><br><b>Job Description</b> <br><p><span>The Laboratory Technician is responsible for performing dimensional and geometrical testing, ensuring the accuracy of measurements, and supporting quality control activities. The role involves analyzing technical drawings, operating metrology equipment, and ensuring compliance with quality standards.</span></p><br><br><br><b>Responsibilities</b> <br><ul> <li><span>Analyze and interpret technical drawings, with strong knowledge of GPS (Geometrical Product Specifications) and tolerance standards</span></li> <li><span>Perform measurements and report results</span></li> <li><span>Create measurement programs using 3D metrology software (PC-DMIS, Calypso, MCOSMOS)</span></li> <li><span>Experience in dimensional and 3D inspection (CMM, 3D scanning, etc.)</span></li> <li><span>Ensure calibration management of measurement equipment</span></li> <li><span>Ensure proper configuration based on quality issue history</span></li> <li><span>Validate product modifications</span></li> <li><span>Provide support during new product launches</span></li> <li><span>Evaluate process capability for new projects</span></li> <li><span>Measure injected parts according to drawings and make decisions on non-conforming dimensions</span></li> <li><span>Conduct MSA studies and analyze the results</span></li> <li><span>Check factory equipment and adjust when possible</span></li> <li><span>Stop production if necessary or ensure containment to protect the customer in case of quality defects</span></li> <li><span>Verify and approve calibration certificates from external laboratories</span></li> <li><span>Ensure compliance with quality, safety, and environmental standards</span></li> <li><span>Ensure that laboratory deliverables are submitted on time to the APQP engineer</span></li> </ul><br><br><b>Skills</b> <br>Coordinate Measuring Machine (CMM)<br>Tolerance Analysis<br>Engineering Drawings<br><br><br><b>Education Requirements</b> <br><p><span>Bachelor’s degree (Bac +3) in Metrology, Industrial Engineering, or Physics</span></p><br><br><br><b>Experience Requirements</b> <br><p>Between 3 and 5 years of experience in laboratory (Metrology)</p><br><br><br><b>Certifications / Licenses</b> <br><p>NA</p><br><br><br><b>Languages</b> <br><p><span><strong>French:</strong> Professional proficiency</span></p><br> <p><span><strong>English:</strong> Intermediate proficiency</span></p><br><br><br><b>Equal Opportunity Employer</b> <br> <p><span><em>Lear Corporation is committed to fair, merit‑based employment practices and equal opportunity.</em></span></p><br> <p><span><em>We provide reasonable accommodations in accordance with applicable law. For assistance during the application process, contact your recruiter directly.</em></span></p><br> <p><em><span>Applicants must submit their resume for consideration using our applicant tracking system. Due to the high volume of applications received, only candidates selected for interviews will be contacted. Candidates must be legally authorized to work in the country where the position is located. Unsolicited resumes from search firms, employment agencies, or similar, will not be paid a fee and will become the property of Lear Corporation.</span></em></p><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company culture : <p><strong>Cosumar</strong> is characterized by a corporate culture centered on <strong>collaboration</strong>, where human relationships, teamwork and employee support play an important role. This collaborative approach is reinforced by a strong <strong>organizational</strong> dimension, ensuring rigor, efficiency and process reliability. The company also values <strong>performance</strong> and goal achievement, while maintaining openness to <strong>innovation</strong> and continuous improvement. This balance fosters a structured, people-oriented and progress-driven work environment. </p><br><br> <br> Job : <p>Join a dynamic company in the Agri-food sector as a MANUFACTURING TECHNICIAN at one of our sites located in the DOUKKALA region. This is a unique opportunity to actively contribute to production processes in a stimulating environment.</p><br><br><p>Your main tasks will include:</p><br><br><p>Ensure maintenance of technological equipment:<br>• Prepare the maintenance program taking into account the pre-established maintenance plan and the analysis of the breakdown history during the campaign<br>• Proceed with the opening, dismantling, and diagnosis of equipment and establish the list of spare parts (PDR) needed for interventions<br>• Check the availability of spare parts in coordination with the storekeeper and act accordingly<br>• Ensure the maintenance program is carried out within the deadlines<br>• Propose improvement actions to the line manager and implement validated actions<br>• Support service providers in carrying out outsourced maintenance work<br>• Prepare the weekly progress report of the work and send it to the line manager</p><br><br><p>• Participate in mechanical tests of equipment and ensure the work is carried out to remove reservations made by the testing commission</p><br><br><p>• Perform hot tests of the station, check interlocks, and remedy any potential malfunctions<br>Campaign:<br>Configure the station's equipment according to operating requirements and management instructions<br>• Prepare and commission the station's equipment in coordination with the power plant and the<br>distribution station<br>Operate the drying and pelletizing station:<br>• Prepare your workstation and familiarize yourself with operating and maintenance instructions<br>• Monitor the progress of the process parameters and act appropriately<br>• Consult laboratory analysis results and act accordingly<br>• Start and monitor the cleaning operation of the relevant machines.<br>• Fill out tracking sheets<br>• Inform management of any significant event related to the station's operation<br>• At the end of the campaign, clean and maintain the equipment<br>Monitor the proper functioning of equipment:<br>Perform rounds to check the proper functioning of equipment and notify the relevant maintenance department in case of malfunction<br>• Monitor the proper progress of the packaging operation<br>• Perform maintenance tasks within your responsibility (greasing, oil level, etc.)<br>Prevent HSE risks in your activities:<br>• Participate in identifying risks in your work area<br>• Observe prescribed precautions and protections<br>• Apply standards in every action<br>Participate in continuous improvement projects:<br>• Ensure the optimization and achievement of energy consumption objectives<br>• Conduct briefing and debriefing meetings with the line manager<br>• Propose improvement actions to the line manager for validation and implement validated actions </p><br><br> <br> <br> Required profile : <p>You have a Bac+2/3 level education in process engineering, electromechanics, or equivalent.</p><br><br><p>Experience as an intern in a similar role is required, ideally in the agri-food sector or heavy industry.</p><br><br><p>If you see yourself in this profile and are ready to take on this challenge, do not hesitate to apply quickly using the button "Send my CV to the recruiter" below.</p><br><br> <br><br> </div>