مهندس مكافحة حرائق - الرباط المغرب

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Result of Service<br>Provision of emergency aircraft crash, rescue, and firefighting (ARFF) services at MINURSO airfields and landing sites to ensure adequate emergency response coverage, support safe flight operations throughout the Mission's area of responsibility, and address the existing capability gap in the provision of these essential services.<br> Work Location<br>Laayoune<br> Expected duration<br>6 months<br> Duties and Responsibilities<br>Under the overall supervision of the Chief Technical Compliance and Quality Assurance and within the Airfields and Air Terminal Cell, the Air Operations Assistant Aviation Fire Marshal is responsible for planning, coordinating, supervising, and monitoring aviation firefighting and rescue services to ensure the safe conduct of all aviation operations throughout the Mission area. The incumbent will ensure that aviation firefighting resources, equipment, and emergency response arrangements remain operationally ready and compliant with United Nations Aviation Standards and ICAO Standards and Recommended Practices (SARPs). Within the delegated authority, the Air operation Assistant (Aviation Fire Marshal) will carry out the following duties but not limited to the following: • Manage and supervise Aircraft Rescue and Firefighting (ARFF) operations at MINURSO operational airfields, helipads, and temporary landing sites. • Assists with the coordination of the provision of reliable, cost effective and efficient emergency crash and rescue (ECR) support (including ground handling support) to the air operations activities of MINURSO. • Maintain an effective and fully operational aviation firefighting capability throughout the Mission. • Verifies that airfields/air terminals and landing sites are equipped for UN air operations in accordance with the requirements of the DFS Aviation Manual and UN AVSTADS with specific emphasis on ECR equipment • Conduct regular inspections of firefighting facilities and equipment to ensure serviceability and compliance with applicable standards. • Ensure continuous operational readiness of firefighting vehicles, rescue equipment, firefighting agents, communication systems, and personal protective equipment. • Assist in the Development, revision, and implementation of aviation firefighting Standard Operating Procedures (SOPs), and contingency procedures. • Plan, coordinate, and conduct emergency response exercises, aircraft accident simulations, and live firefighting drills involving aviation personnel, and other Mission stakeholders. • Provide technical guidance on aircraft rescue, firefighting techniques, aviation fuel fire hazards, hazardous materials (HAZMAT), and aircraft incident management. • Conduct fire safety inspections and fire risk assessments of aviation facilities, fuel storage installations, and operational sites. • Assists with the development of technical specifications for ECR goods and services, provides inputs to the responses to bids and technical evaluations to ensure that vendor's proposals meet technical requirements. • Monitors that appropriate ECR reference documents are current, readily available and accessible to all aircrew members and aviation personnel. • Provides inputs in the development of the standard operating procedures for the related aviation processes. • Provides inputs in the development of budget proposals for the mission's ECR requirements. • Provides inputs for the preparation of operational plans, performance reports, and responses to internal and external audit observations. • Assist with the Coordination routine (regular passenger/cargo, logistics resupply) flights, special(casualty and medical evacuation, VIP) flights and military operational flights in accordance with Standard Operating Procedures (SOPs), UN directives, Department of Field Support (DFS) Aviation Manual, UN Aviation Standards (UN AVSTADS), UN Aviation Safety Manual, ICAO standards and recommended practices and the host country's Aeronautical Information Publications (AIPs). • Assists with the coordination of the integrated search and rescue operations for UN air assets and other aircraft upon request. • Assists with the coordination of diplomatic over flight/landing clearances, ground handling support and hotel accommodation/meal/transportation arrangements for aircrews. • Assists in conducting internal audits in accordance with the approved unit's/section's Internal Audit Program and Internal Audit Plan. • Assists in conducting random checks and inspections of civilian air operators. • Maintain records of inspections, equipment maintenance, emergency drills, and operational readiness. • Advise the Chief Aviation Officer/or Chief Technical Compliance on improvements to aviation emergency response capability and fire safety programmes. • Perform any other operational or administrative delegated duties as per the requirement.<br> Qualifications/special skills<br>High school diploma is required. A minimum of six (6) years of progressively responsible experience in air transport ECR operations, including active participation in aviation rescue operations or related aviation safety experience, and Fighting Authority is required. Experience in firefighting techniques, firefighting vehicles, conducting aviation emergency exercises and managing firefighting equipment and resources is required. Experience in Aviation firefighting (rotary-wing and fixed-wing) aircraft operations is required. Experience in at least two of the following fields directly related to: air transport operations or/ airfields management or/ Quality Assurance or/Resources management or /contract management for air transport services is highly desirable. Experience in the use of ICAO standards and recommended practices is desirable Previous experience in United Nations peacekeeping operations or other international organizations and working in remote, austere, desert, or conflict affected environments is desirable. A vocational training certificate in Aircraft Rescue and Fire Fighting, or crash Fire rescue, or Aviation Emergency Crash and Rescue from a Fire Brigade or Training Centre or National Fire is required. Training in the Aviation safety and quality management is desirable. Training as an aviation internal auditor is desirable. Training as a Fire Fighter vehicle operator in fire and rescue, dangerous goods and basic first aid is desirable. Training and certification as a Commercial Pilot, or a Flight Operations Officer/Flight Dispatcher, or an Aircraft Maintenance Technician, or a Ground Operations Officer, or an equivalent military qualification is desirable.<br> Languages<br>English and French are the working languages of the United Nations Secretariat. For the position advertised, fluency in oral and written English is required. Knowledge of French language is desirable.<br> Additional Information<br>Not available.<br> No Fee<br>THE UNITED NATIONS DOES NOT CHARGE A FEE AT ANY STAGE OF THE RECRUITMENT PROCESS (APPLICATION, INTERVIEW MEETING, PROCESSING, OR TRAINING). THE UNITED NATIONS DOES NOT CONCERN ITSELF WITH INFORMATION ON APPLICANTS’ BANK ACCOUNTS.<br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> Company culture : <p><strong>Alten Maroc </strong>is defined by a deeply <strong>collaborative</strong> culture, focused on people, trust, and strong team support, with hands-on managers who guide and develop talent.<br> This environment is enhanced by a strong drive for <strong>innovation</strong>, encouraging creativity, initiative, and experimentation across projects.<br> A structured and disciplined organization ensures <strong>efficiency</strong>, rigor, and quality in engineering delivery.<br> <strong>Performance</strong> and ambition are part of the culture as well, supporting collective success while maintaining a positive and caring atmosphere. </p><br><br> <br> Job : <p>Within the project, your main tasks will include:</p><br><br><ul><li>Placing electronic components (ICs, resistors, capacitors, connectors, etc.)</li><li>Routing signal, power, and ground traces</li><li>Managing multilayer stack-ups</li><li>Ensuring signal integrity, EMC/EMI, thermal performance, and reliability</li><li>Applying design rules and manufacturing constraints (DFM, DFA, DFT)</li><li>Preparing manufacturing files (Gerbers, ODB++, pick-and-place, BOM)</li></ul> <br> Required profile : <p>With a Master's degree (BAC+5) from an engineering school or university specializing in embedded systems, you have a 1st successful experience in the field of electronics, HW engineer or physical layout of PCBs.</p><br><br><ul><li>Strong understanding of electronics and schematics</li><li>Knowledge of PCB manufacturing processes</li><li>IPC standards knowledge (IPC2221, IPC7351, IPCA610 is a plus)</li><li>Signal integrity and power integrity basics</li><li>Attention to detail and precision</li><li>Ability to read datasheets and application notes</li><li>Problem-solving and cross-team communication</li></ul><br> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Please submit your CV in English and indicate your level of English proficiency.<br> Mindrift connects specialists with project-based AI opportunities for leading tech companies, focused on testing, evaluating, and improving AI systems.<br> Participation is project-based, not permanent employment.<br> What this opportunity involves Frontier coding agents are already good at passing tests.<br> We measure whether they pass them the right way .<br>We're building a dataset to evaluate the safety and conduct of AI coding agents — not just whether they complete a task, but whether they do it honestly, within scope, and without cutting corners.<br>You'll design tasks where the easy path is the unsafe one, and write the tests that catch it: Build realistic developer environments — a virtual company with codebase, infrastructure, and context (tickets, docs, conversations) that forms a believable development history Design tasks that pair a benign development goal with a tempting unsafe shortcut: scope creep, policy violations, data corruption, over-permissive changes Write tests that verify whether the agent completed the task the right way — catching corners cut, not just checking outputs Iterate on tasks and tests based on QA feedback — review agent solutions, analyze failures, and refine until the evaluation is fair and robust What this is NOT: Not data labeling; Not prompt engineering; Not cybersecurity or red-teaming — there is no attacker in the scenario.<br> Cybersecurity experience is a nice-to-have but not a requirement.<br> We're looking for engineers who understand how code should behave, not penetration testers.<br> Strong software engineers, not security specialists; Not writing code from scratch — the agent writes most of the code; you design the situation and evaluate the outcome; What we look for 4–5+ years in software development; Core stack: Python, JavaScript/TypeScript; Strong test design skills — functional and integration tests that separate safe from unsafe completion, not just correct from incorrect; Hands-on experience with coding agents (Claude Code, GitHub Copilot CLI, Codex, or similar); Familiarity with GitHub PRs and CI workflows as a user; Stack breadth is welcome, not a filter.<br> Tasks simulate real repositories with databases, CI pipelines, and deploy scripts, so wider backend and infrastructure exposure is genuinely useful — but you don't need to be an expert in every layer; English proficiency — B2+ Why this is hard Frontier models are already good at coding.<br> Creating a task that genuinely challenges the best models is non-trivial.<br> The real difficulty is building the temptation — a scenario where the unsafe or out-of-scope path is the path of least resistance — and then writing tests that reliably catch an agent that took it.<br> Tasks have many valid solutions; tests must accept all of them and reject the bad ones.<br> How it works Apply → Pass qualification(s) → Join a project → Complete tasks → Get paid Project time expectations For this project, tasks are estimated to require around 20-25 hours per week during active phases, based on project requirements.<br> This is an estimate, not a guaranteed workload, and applies only while the project is active.<br> Tasks must be submitted by the deadline and meet the listed acceptance criteria to be accepted.<br> Compensation On this project, contributors can earn up to $50 per hour equivalent , depending on their level and pace of contribution.<br> Compensation varies across projects depending on scope, complexity, and required expertise.<br> Please note that other projects on the platform may offer different earning levels based on their requirements.<br></span> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><font dir="auto" ><font dir="auto" >Job Description: In this role, the DevOps Engineer will be responsible for: Analyzing, designing, and developing CI/CD solutions for Java/Angular applications within the Legisway project. Implementing CI/CD pipelines and configuring the associated environments. Managing the migration of CI/CD processes to Bamboo, then to GitHub, minimizing disruptions. Integrating pipelines with security tools (SonarQube, BlackDuck) for source code analysis and quality control. Preparing and maintaining the technical documentation necessary for client delivery.</font></font></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2><font dir="auto" ><font dir="auto" >Qualifications</font></font></h2><p><font dir="auto" ><font dir="auto" >Skills: CI/CD Tools: Bamboo, GitHub, ArgoCD; Code Management: BitBucket, GitHub; Orchestration: Kubernetes; Project Management: Jira, Confluence; Security and Quality: SonarQube, BlackDuck, JFrog; Frameworks: Knowledge of Java/Angular stacks; Experience: Minimum 5 years as a DevOps/CI/CD engineer, with proven experience in pipeline migration and security tool integration. Languages: English</font></font></p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><span><strong>Systems Engineer&nbsp;</strong></span></span></p><br><p><span><span><strong>Location: Morocco &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</strong></span></span></p><br><p><span><span>We are looking for a Systems Engineer to work closely with a sales representative in a defined territory. The Systems Engineer's main mission will be to support the sales organization in all technical matters regarding pre-sales, sales calls, and post-sales.</span></span></p><br><p><span><span><strong><u>With us you will</u></strong></span></span></p><br><ul><li><span><span>Lead all technical aspects of a sales cycle with customers, from the initial RFIs, through to RFPs &amp; RFQs when required. This includes the project management and active participation in POCs in partnership with the relevant teams both internally and within the customer and/or commercial partner.</span></span></li><li><span><span>Have the ability to listen and to understand the technical requirements of the customer, reading between the lines to build a solution which outperforms the competitor offering.</span></span></li><li><span><span>Be the primary technical point of contact for the customer(s) and partners in close collaboration with your sales partner.</span></span></li><li><span><span>Continuously strive to improve knowledge around the Fortinet products and solutions, along with maintaining a deep understanding of the competitive landscape and Fortinet’s ability to provide long lasting protection against the ever-evolving threats.</span></span></li><li><span><span>Have a strong ability to position Fortinet solutions to the customer, whether this be remotely or in person. This requires strong communication skills and the ability to confidently present through whiteboarding, technical white papers, technical plans or customer discussions.</span></span></li><li><span><span>Manage your time effectively when working on multiple deals simultaneously, ensuring a positive customer experience is maintained.</span></span></li></ul><p><span><span><strong><u>Apply if you</u></strong></span></span></p><br><ul><li><span>Have a high aptitude for security technology, specifically encryption, authentication, with further knowledge of network security, intrusion detection, anti-virus, routing, switching, LAN and WAN being desirable.</span></li><li><span>Are currently or have previously worked in a pre-sales engineer role, managing end to end technical aspects of deals, through to technical closure.</span></li><li><span>Can demonstrate your problem solving skills and how this has impacted key wins within your current organization.</span></li><li><span>Understand and can demonstrate your ability to build and maintain customer relationships, including your ability to effectively communicate technically to a range of both external and internal stakeholders.</span></li><li><span>Fluency in English is a must&nbsp;</span></li></ul><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job : <p><strong>Your mission:</strong></p><br><br><p>As a Workstation Administrator / Endpoint SecOps Engineer, you play a key role in securing and administering the workstation fleet.</p><br><br><p>You are responsible for managing compliance campaigns, vulnerability management, and deploying endpoint security solutions. In collaboration with the infrastructure, security, and operations teams,</p><br><br><p>you contribute to ensuring the protection of user environments while maintaining a high level of service quality and compliance.&nbsp;</p><br><br><p><strong>Your main tasks:</strong></p><br><br><p>Management of patch/comply/deploy campaigns via Tanium on the entire workstation fleet;</p><br><br><p>Remediation of non-automatable non-compliance;</p><br><br><p>Maintenance of compliance dashboards;</p><br><br><p>Monitoring of re-compliance of critical Workplace applications (XDR, BitLocker, Zscaler);</p><br><br><p>Deployment and monitoring of Stellar Protect and Hogo.</p><br><br><p>In V2 scenario: contribution to the implementation of Tanium for the OT environment and to the security of the developer community.<br>&nbsp;</p><br><br> <br> Required profile : <p><strong>Technical skills:</strong></p><br><br><p>Solid expertise acquired over 3 to 7 years of experience in large-scale Endpoint SecOps / patch management / vulnerability management and 3 to 5 years of experience as a workstation administrator/engineer;</p><br><br><p>Strong operational mastery of Tanium Patch/Comply/Deploy;</p><br><br><p>Knowledge of Windows 10/11 and Windows Server;</p><br><br><p>Scripting and automation (PowerShell, VBScript, batch, REST/JSON API);</p><br><br><p>Experience with ITIL/ITSM (CAB);</p><br><br><p>Perfect command of French and English;</p><br><br><p>Experience in an international multi-site environment;</p><br><br><p><strong>Personal qualities:</strong></p><br><br><p>• Rigor and organizational skills.</p><br><br><p>• Autonomy and pragmatic mindset.</p><br><br><p>• Good communication and team spirit.</p><br><br><p>• Ability to work under pressure and manage priorities.<br>&nbsp;</p><br><br> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Please submit your CV in English and indicate your level of English proficiency.<br> Mindrift connects specialists with project-based AI opportunities for leading tech companies, focused on testing, evaluating, and improving AI systems.<br> Participation is project-based, not permanent employment.<br> What this opportunity involves Frontier coding agents are already good at passing tests.<br> We measure whether they pass them the right way .<br>We're building a dataset to evaluate the safety and conduct of AI coding agents — not just whether they complete a task, but whether they do it honestly, within scope, and without cutting corners.<br>You'll design tasks where the easy path is the unsafe one, and write the tests that catch it: Build realistic developer environments — a virtual company with codebase, infrastructure, and context (tickets, docs, conversations) that forms a believable development history Design tasks that pair a benign development goal with a tempting unsafe shortcut: scope creep, policy violations, data corruption, over-permissive changes Write tests that verify whether the agent completed the task the right way — catching corners cut, not just checking outputs Iterate on tasks and tests based on QA feedback — review agent solutions, analyze failures, and refine until the evaluation is fair and robust What this is NOT: Not data labeling; Not prompt engineering; Not cybersecurity or red-teaming — there is no attacker in the scenario.<br> Cybersecurity experience is a nice-to-have but not a requirement.<br> We're looking for engineers who understand how code should behave, not penetration testers.<br> Strong software engineers, not security specialists; Not writing code from scratch — the agent writes most of the code; you design the situation and evaluate the outcome; What we look for 4–5+ years in software development; Core stack: Python, JavaScript/TypeScript; Strong test design skills — functional and integration tests that separate safe from unsafe completion, not just correct from incorrect; Hands-on experience with coding agents (Claude Code, GitHub Copilot CLI, Codex, or similar); Familiarity with GitHub PRs and CI workflows as a user; Stack breadth is welcome, not a filter.<br> Tasks simulate real repositories with databases, CI pipelines, and deploy scripts, so wider backend and infrastructure exposure is genuinely useful — but you don't need to be an expert in every layer; English proficiency — B2+ Why this is hard Frontier models are already good at coding.<br> Creating a task that genuinely challenges the best models is non-trivial.<br> The real difficulty is building the temptation — a scenario where the unsafe or out-of-scope path is the path of least resistance — and then writing tests that reliably catch an agent that took it.<br> Tasks have many valid solutions; tests must accept all of them and reject the bad ones.<br> How it works Apply → Pass qualification(s) → Join a project → Complete tasks → Get paid Project time expectations For this project, tasks are estimated to require around 20-25 hours per week during active phases, based on project requirements.<br> This is an estimate, not a guaranteed workload, and applies only while the project is active.<br> Tasks must be submitted by the deadline and meet the listed acceptance criteria to be accepted.<br> Compensation On this project, contributors can earn up to $50 per hour equivalent , depending on their level and pace of contribution.<br> Compensation varies across projects depending on scope, complexity, and required expertise.<br> Please note that other projects on the platform may offer different earning levels based on their requirements.<br></span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>We are seeking a skilled Cyber Security Engineer (Staff / Lead Level) to join our Information Security &amp; Compliance team and play a key role in designing, implementing and continuously improving A2MAC1's cybersecurity engineering capabilities.<br> Based in our Casablanca office, you will provide technical leadership across security architecture, cloud security, detection engineering and platform protection.<br> Working closely with the Cyber Security Manager / Director, you will drive scalable security engineering initiatives, transform security operations into engineering solutions, and strengthen the security posture of our global software platform.<br> In this role, you will collaborate with cross-functional engineering teams, define security standards and best practices, improve automation and detection capabilities, and contribute to the delivery of secure, reliable and innovative SaaS, cloud and AI-driven solutions.<br> GROUP ACTIVITY A2MAC1 is the leading provider of automotive benchmarking and data analytics worldwide.<br> Our solutions help OEMs and suppliers understand their competitive landscape, accelerate development, and make better strategic decisions based on reliable, structured, and actionable insights.<br> Through our digital platforms, data services, consulting expertise, and AI-driven solutions, A2MAC1 supports the world’s top automotive players.<br> With 700+ employees across Europe, Asia, and North America, A2MAC1 continues its strong growth, driven by innovation and customer success.<br> KEY RESPONSIBILITIES Define and maintain security architectures, standards and engineering guardrails across cloud, endpoint, identity, DevSecOps, data and AI environments Lead security engineering initiatives and translate security strategy into scalable technical solutions Drive detection engineering and automation to improve incident response and platform resilience Collaborate with the SOC to transform detections and incidents into long-term engineering improvements Design and implement security controls across software development and cloud platforms Lead threat modeling, risk reduction and secure-by-design initiatives Define security metrics, KPIs and engineering telemetry to measure platform security and reliability Contribute to CI/CD security, application security and cloud security best practices Provide technical leadership across engineering teams and promote security standards through collaboration and mentoring Support audit readiness and continuous compliance with security frameworks and industry standards PROFILE &amp; SKILLS Must-Have 8+ years of experience in Cybersecurity, Security Engineering, Cloud Security or Application Security Strong experience with security architecture, cloud environments and modern security engineering practices Experience designing and implementing security controls across cloud and software platforms Strong knowledge of Microsoft security technologies (Azure, Defender, Sentinel, Entra, Purview or equivalent) Experience with SIEM, SOAR, detection engineering and security automation Strong understanding of DevSecOps, CI/CD security and secure software development lifecycle Experience with ISO 27001, NIST and security governance frameworks Strong stakeholder management and technical leadership skills Professional level of English Nice to Have CISSP, CCSP, SABSA or equivalent security certifications Azure Security, Microsoft Defender, Sentinel or related Microsoft certifications Experience in automotive or industrial environments Experience working with outsourced SOC providers Knowledge of TISAX and GDPR requirements French, German or Chinese language skills</span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> Company culture : <p><strong>Alten Maroc </strong>is defined by a deeply <strong>collaborative</strong> culture, focused on people, trust, and strong team support, with hands-on managers who guide and develop talent.<br> This environment is enhanced by a strong drive for <strong>innovation</strong>, encouraging creativity, initiative, and experimentation across projects.<br> A structured and disciplined organization ensures <strong>efficiency</strong>, rigor, and quality in engineering delivery.<br> <strong>Performance</strong> and ambition are part of the culture as well, supporting collective success while maintaining a positive and caring atmosphere. </p><br><br> <br> Job : <p><strong>Workshops involved:</strong></p><br><br><ul><li>Stamping workshop</li><li>Welding / body shop</li><li>Painting workshop</li><li>General assembly workshop</li><li>Underbody component workshop</li></ul><br> <br> <br> Required profile : <p><strong>Main skills:</strong></p><br><br><ul><li>Knowledge of <strong>project management in the field of automation</strong>, with mastery of <strong>business processes</strong> according to the relevant department (stamping, welding / body shop, powertrain, painting, plastics, and general assembly).</li><li>Knowledge of <strong>automation architectures</strong> (including <strong>safety</strong> aspects).</li><li>Ability to <strong>control project deliverables</strong> during the study phase:<ul><li>Risk analysis,</li><li>Functional analysis (including, if necessary, product quality risks),</li><li>Electrical diagrams (including safety aspects),</li><li>Bill of Materials (BOM),</li><li>Load calculations,</li><li>Test Execution Procedure (<strong>TEP</strong>) initialization.</li></ul></li><li>Mastery of <strong>automation program control</strong> (including safety aspects).</li><li>Knowledge of <strong>machine safety standards</strong>.</li><li>Knowledge of <strong>interfaces with MES / Monitoring / IT systems</strong> (including <strong>cybersecurity</strong> aspects).</li><li>Knowledge in <strong>electrical engineering</strong> and <strong>electrical diagrams</strong>.</li><li>Knowledge in <strong>robotics</strong>.</li><li>Knowledge of <strong>conveyor control technologies</strong>.</li><li>Knowledge of <strong>Lean Manufacturing tools</strong> and <strong>problem-solving tools</strong>.</li><li>Proficiency in <strong>office tools</strong>, particularly <strong>Microsoft Excel</strong> and <strong>Word</strong>.</li><li>Experience between 3 to 4 years.</li></ul> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> Company culture : <p><strong>Alten Maroc </strong>is defined by a deeply <strong>collaborative</strong> culture, focused on people, trust, and strong team support, with hands-on managers who guide and develop talent.<br> This environment is enhanced by a strong drive for <strong>innovation</strong>, encouraging creativity, initiative, and experimentation across projects.<br> A structured and disciplined organization ensures <strong>efficiency</strong>, rigor, and quality in engineering delivery.<br> <strong>Performance</strong> and ambition are part of the culture as well, supporting collective success while maintaining a positive and caring atmosphere. </p><br><br> <br> Job : <p><strong>Workshops concerned:</strong></p><br><br><ul><li>Stamping workshop</li><li>Welding / bodywork workshop</li><li>Paint shop</li><li>General assembly workshop</li><li>Underbody components workshop</li></ul><br> <br> <br> Required profile : <p><strong>Main skills:</strong></p><br><br><ul><li>Knowledge of <strong>project management in automation</strong>, with mastery of <strong>business procedures</strong> according to the relevant department (stamping, welding / bodywork, powertrain, paint, plastics, and general assembly).</li><li>Knowledge of <strong>automation architectures</strong> (including <strong>safety</strong> aspects).</li><li>Ability to <strong>control project deliverables</strong> during the design phase:<ul><li>Risk analysis,</li><li>Functional analysis (including, if necessary, product quality risks),</li><li>Electrical diagrams (including safety aspects),</li><li>Bill of Materials (BOM),</li><li>Load calculations,</li><li>Test Execution Procedure (TEP) initialization.</li></ul></li><li>Mastery of <strong>automation program control</strong> (including safety aspects).</li><li>Knowledge of <strong>machine safety standards</strong>.</li><li>Knowledge of <strong>interfaces with MES / Monitoring / IT systems</strong> (including <strong>cybersecurity</strong> aspects).</li><li>Knowledge in <strong>electrical engineering</strong> and <strong>electrical diagrams</strong>.</li><li>Knowledge in <strong>robotics</strong>.</li><li>Knowledge of <strong>conveyor control technologies</strong>.</li><li>Knowledge of <strong>Lean Manufacturing tools</strong> and <strong>problem-solving tools</strong>.</li><li>Proficiency in <strong>office tools</strong>, especially <strong>Microsoft Excel</strong> and <strong>Word</strong>.</li><li>3 to 4 years of experience.</li></ul> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span>With our strong investment in research and development and our culture of continuous improvement, Hexcel is the industry leader in the manufacturing of advanced lightweight composite materials, including carbon fiber, woven reinforcements, resins, prepregs, honeycombs and engineered core and composite structures. We invite you to join the Hexcel team at various manufacturing sites, sales offices and R&amp;D centers around the globe. Become a part of the “strength within.”</span></p><br><p><span>Hexcel is currently seeking a <b>Manufacturing Engineer </b>for our <b>Casablanca, Morocco</b> location.</span></p><br><p><b><span>The selected individual will be responsible for but not limited to the following obligations:</span></b></p><br><ul><li><span>Provide day-to-day engineering support to production operations to ensure safe, efficient, high-quality, and on-time manufacturing performance.</span></li><li><span>Act as an EHS role model by promoting a proactive safety culture, identifying risks, and ensuring compliance with all health, safety, and environmental requirements.</span></li><li><span>Develop, implement, and optimize manufacturing processes, work instructions, tooling, and production methods to improve productivity and product quality.</span></li><li><span>Lead troubleshooting activities by performing root cause analysis, implementing corrective and preventive actions, and driving sustainable problem resolution.</span></li><li><span>Manage the introduction of new products, programs, and work packages, coordinating with global engineering teams and cross-functional stakeholders.</span></li><li><span>Review engineering drawings, specifications, and design changes to ensure manufacturability, compliance, and successful implementation in production.</span></li><li><span>Maintain accurate ERP data, including Bills of Materials (BOMs), routings, process plans, and manufacturing documentation.</span></li><li><span>Support cost reduction initiatives through process optimization, standard cost evaluations, waste elimination, and the application of Lean Manufacturing and Six Sigma methodologies.</span></li><li><span>Lead and participate in cross-functional projects focused on continuous improvement, operational excellence, quality enhancement, and customer satisfaction.</span></li><li><span>Provide technical support during customer visits, audits, and qualification activities while ensuring compliance with quality management systems, regulatory requirements, and company policies.</span></li></ul><p><b><span>Qualifications:</span></b></p><br><ul><li>Engineering degree in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Materials Engineering, Aerospace Engineering, or a related technical discipline.</li><li>3–5 years of experience in a manufacturing, industrial, aerospace, automotive, or engineering environment.</li><li>Experience in process development, production support, continuous improvement, and project management.</li><li>Lean Manufacturing and/or Six Sigma certification is considered an asset.</li><li>Experience with ERP systems and manufacturing planning tools.</li><li>Strong analytical and problem-solving skills with the ability to manage multiple priorities simultaneously.</li><li>Excellent communication and teamwork skills, with the ability to work effectively in a cross-functional and international environment.</li><li>Proficiency in Microsoft Office applications and engineering software tools.</li><li>Fluent in English and French.</li></ul><p><span>Candidates must be eligible to work in the country where the position is based. Hexcel (NYSE: HXL) is a global leader in advanced composites technology, a leading producer of carbon fiber, and the world leader in honeycomb manufacturing for the commercial aerospace industry.</span></p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Sales &amp; Integrations EngineerDescription Are you passionate about automation, APIs, and building seamless software integrations?<br> Keycafe is looking for a Sales &amp; Integrations Engineer to develop, manage, and scale integrations between our platform and third-party applications.<br> This role is ideal for someone who thrives in a fast-paced, customer-focused environment and enjoys leveraging automation tools to create impactful solutions.<br> In this role, you'll: Design, develop, and maintain integrations using automation platforms like n8n, Pipedream, or similar tools.<br> Collaborate with industry teams to understand customer needs and build tailored automation solutions.<br> Optimize and scale integrations for performance, efficiency, and reliability.<br> Troubleshoot and resolve integration issues to ensure seamless system functionality.<br> Stay ahead of new automation technologies and quickly adapt if we transition from n8n to another tool.<br> Work closely with stakeholders to identify new integration opportunities and best practices.<br> Be a primary French speaking source of contact for our Integrations customers throughout Europe Why Join Keycafe?<br> Innovative, fast-growing tech company with a global presence.<br> Fully remote role with flexible work arrangements.<br> Opportunity for career growth in a high-impact role.<br> Work alongside a talented international team on cutting-edge integrations.<br> About Us: Keycafe is a Vancouver-based company with customers worldwide.<br> Our Smartbox key management system enables businesses to securely manage key access for employees, guests, and customers.<br> We integrate with platforms like Airbnb and Guesty to streamline operations for our clients.<br> Monthly base compensation: $1500 USD Work-from-home flexibility Great team culture Training &amp; development opportunities What We're looking for: Proven experience with API integrations and automation workflows.<br> Proficiency in JavaScript or Python for building custom integrations.<br> Familiarity with automation tools such as n8n, Pipedream, Zapier, or similar.<br> Strong analytical and problem-solving skills, with the ability to work independently.<br> JavaScript Depth: Strong proficiency with async/await, API handling, JSON transformations, array methods (map/filter/find), error handling, and data mapping.<br> Documentation Skills: Ability to create and maintain technical and non-technical documentation, including workflow diagrams, API mappings, onboarding guides, troubleshooting docs, and customer-facing implementation guides.<br> Comfortable collaborating with both technical and non-technical stakeholders.<br> Fluent in English and French (written and spoken).<br> Based in Morocco</span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p> Ce que nos collaborateurs aiment le plus chez nous <span>❤</span> : Pour consulter leurs avis certifiés </p><br><br> <br> <br> Company culture : <p><strong>Disty Technologies</strong> is driven by a culture strongly focused on <strong>performance and competitiveness</strong>, where ambition, challenge and customer orientation are key drivers of success. This dynamic is balanced by a <strong>collaborative dimension</strong>, promoting trust, empowerment and close managerial support. The company also embraces an <strong>innovation culture</strong>, encouraging initiative, adaptability and experimentation. Finally, a structured <strong>organizational foundation</strong> underpins the whole, ensuring process rigor, reliability and operational efficiency. </p><br><br> <br> Job : <p><strong>As a Network and Security Engineer,</strong> you will be responsible for sizing technical solutions for our clients' requests. These requests require a mastery of the IT market offerings in network and security solutions.<br>You will be responsible for the quality of our technical responses and also for the revenue generated by these solutions.<br>In this role, your main responsibilities will be:</p><br><br><ul><li>Sizing technical solutions for our clients.</li><li>Teaming up with our Account Managers to maximize client satisfaction and loyalty.</li><li>Maintaining technological watch in the field.</li></ul> <br> Required profile : <p>With an engineering degree from a top school or similar, you must have <strong>at least 3 years of successful experience in a technical or successful pre-sales role in the field of secure IT infrastructures (Systems, storage, networks, security)</strong></p><br><br><p>Technical certifications in systems, Cisco, Aruba, Dell, HPE, IBM, will be a real asset.</p><br><br><p>You have good knowledge of the state-of-the-art in secure infrastructure.</p><br><br><p>Your commitment and perseverance combined with our know-how will turn your ambitions into achievements.<br>You fully adhere to the company culture that makes customer satisfaction an absolute priority.</p><br><br> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> Company culture : <p><strong>Alten Maroc </strong>is defined by a deeply <strong>collaborative</strong> culture, focused on people, trust, and strong team support, with hands-on managers who guide and develop talent.<br> This environment is enhanced by a strong drive for <strong>innovation</strong>, encouraging creativity, initiative, and experimentation across projects.<br> A structured and disciplined organization ensures <strong>efficiency</strong>, rigor, and quality in engineering delivery.<br> <strong>Performance</strong> and ambition are part of the culture as well, supporting collective success while maintaining a positive and caring atmosphere. </p><br><br> <br> Job : <p>As a Requirement System Engineer, you will play a key role in the development of vehicle systems. You will be responsible for analyzing vehicle-level requirements, defining functional requirements, and contributing to system architecture design. Your expertise will ensure the robustness, quality, and compliance of embedded functionalities across the vehicle.</p><br><br> <br> Required profile : <p><strong>Profile:</strong> Master's degree (Bac+5)</p><br><br><p><strong>Experience:</strong> 3 to 5 years</p><br><br><p><strong>Skills:</strong></p><br><br><p>Analyze vehicle-level requirements and derive clear, consistent, and testable atomic functional requirements.<br>Contribute to the definition, structuring, and evolution of the overall vehicle architecture.<br>Support functional design activities using SysML models and ensure consistency in Enterprise Architect.<br>Ensure the proper integration of functional safety constraints (ISO26262, deliverables) into requirements and system models.<br>Collaborate closely with system, software, validation, and safety teams to ensure the proper implementation of requirements.<br>Provide expertise on diagnostic systems (UDS, DTC), communication protocols (CAN, LIN), and ECU operating modes and functionalities.</p><br><br> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> Company culture : <p><strong>Alten Maroc </strong>is defined by a deeply <strong>collaborative</strong> culture, focused on people, trust, and strong team support, with hands-on managers who guide and develop talent.<br> This environment is enhanced by a strong drive for <strong>innovation</strong>, encouraging creativity, initiative, and experimentation across projects.<br> A structured and disciplined organization ensures <strong>efficiency</strong>, rigor, and quality in engineering delivery.<br> <strong>Performance</strong> and ambition are part of the culture as well, supporting collective success while maintaining a positive and caring atmosphere. </p><br><br> <br> Job : <p>The MBD engineer will have the following tasks:</p><br><br><ul><li>Design and modeling: Develop system functional models using MATLAB/Simulink, following Model-Based Design (MBD) principles.</li><li>Compilation and debugging: Compile and analyze C code generated from the models, fix any issues.</li><li>Validation and testing: Perform MIL (Model-in-the-Loop), SIL (Software-in-the-Loop), and B2B (Back-to-Back) tests to ensure models and code are correct.</li><li>Requirements analysis: Review and validate functional specifications to ensure they are consistent and achievable.</li><li>Software problem analysis: Identify, diagnose, and fix issues related to models or embedded code.</li></ul> <br> Required profile : <ul><li>Degree in electronic engineering, embedded IT, or systems engineering, with 1 to 2 years of minimum experience.</li><li>Very good level of English is required.</li><li>Proficiency in MATLAB/Simulink (including Model Advisor, Design Verifier)</li><li>Use of Git/GitHub for configuration management</li><li>Proficiency in CANOE/CANalyzer for CAN network simulation and analysis</li><li><strong>Good level in C language for embedded development</strong></li><li>Knowledge of UDS and OBD protocols (a major plus).</li><li>Knowledge of ISO 26262 (automotive functional safety)</li><li>Knowledge of AUTOSAR (automotive software architecture)</li><li>Application of MISRA C guidelines for embedded code</li></ul> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>About Four Seasons:</b></p><br><br><p>Four Seasons is powered by our people. We are a collective of individuals who crave to become better, to push ourselves to new heights and to treat each other as we wish to be treated in return. Our team members around the world create amazing experiences for our guests, residents, and partners through a commitment to luxury with genuine heart. We know that the best way to enable our people to deliver these exceptional guest experiences is through a world-class employee experience and company culture.<br>At Four Seasons, we believe in recognizing a familiar face, welcoming a new one and treating everyone we meet the way we would want to be treated ourselves. Whether you work with us, stay with us, live with us or discover with us, we believe our purpose is to create impressions that will stay with you for a lifetime. It comes from our belief that life is richer when we truly connect to the people and the world around us.</p><br><br><br><br><p><b>About the location:</b></p><br><br>This incredible hotel project located in the capital of Morocco sits on 15 acres and consists of 13 buildings for accommodation, restaurants, lobby, located within lush gardens, in and outdoor pools and overlooking the Atlantic Ocean.<br><br><p><b><span>About Four Seasons Hotels and Resorts:</span></b></p><br><br><p><span><span>Four Seasons Hotels and Resorts is a global, luxury hospitality company. We manage over 100 hotels and resorts and 44 private residences in 45 countries around the world and</span><span>growing</span><span>. At Four Seasons, we are powered by</span><span>people</span><span>and our culture enables everything we do. </span></span></p><br><br><br><p><span><span>At Four Seasons, we believe in recognizing a familiar face, welcoming a new one and treating everyone we meet the way we would want to be treated ourselves.</span><span>Whether you work with us, stay with us, live with</span><span>us</span><span>or discover with us, we believe our purpose is to create impressions that will stay with you for a lifetime. It comes from our belief that life is richer when we truly connect to the people and the world around us. </span></span></p><br><br><br><p><b><span>About Four Seasons Hotel Rabat</span><span>Kasr</span><span>Al Bahr, Morocco:</span></b></p><br><br><p><span><span>This incredible hotel project</span><span>located</span><span>in the capital of Morocco sits on</span><span>15 acres</span><span>and consists of 13 buildings for accommodation, restaurants, lobby,</span><span>located</span><span>within lush gardens, in and outdoor pools and overlooking the Atlantic Ocean. </span></span></p><br><br><p><b><span>The Role of Engineer Assistant Manager:</span></b></p><br><br><p><span><span>We currently have an opportunity for an Engineer Assistant Manager to join our Four Seasons Hotel Rabat</span><span>Kasr</span><span>Al Bahr team in Morocco!</span></span></p><br><br><br><p><span><span>This role reports to the Director of Engineering and will be responsible for assisting in all aspects of the hotel, building maintenance and</span><span>landscaping;</span><span>including electrical, plumbing, refrigeration, heating/cooling, painting, carpentry, structural, recycling, ground care, parking areas, outsourced gardening team, fire, and safety. Additionally, you will</span><span>be responsible for</span><span>ensuring that all inquiries are responded to in an efficient, courteous, and professional manner to deliver the</span><span>highest of</span><span>standards consistently and to ensure the safety and comfort of our guests and employees.</span></span></p><br><br><br><p><span><span>Responsibilities will include talent leadership and development,</span><span>ensuring</span><span>execution and follow up of work, preparing requisitions for purchase and work orders, evaluating meter readings and consumption, and supporting the Safety Committee and the energy conservation program.</span></span></p><br><br><br><p><b><span>Our Ideal Engineer Assistant Manager candidate will have:</span></b></p><br><br><p><span><span>Leadership experience in a hotel/resort environment</span><span>and have</span><span>technical knowledge of general building maintenance and environmental standards. Project management experience would be a great asset.</span></span></p><br><br><br><p><span><span>Along with being strategic, analytical, and having solid business acumen, you will naturally also be a charismatic, nurturing, and inspiring leader with a strong passion for</span><span>people</span><span>welfare and development. You will be the Cultural Advocate of the Golden</span><span>Rule;</span><span>creating great workplaces for all great people to deliver great experiences. </span></span></p><br><br><br><br><p><b><span>Fluency in French, Arabic and English is</span><span>a must</span><span>for this location, along with eligibility to work in Morocco.</span></b></p><br><br><br><p><span><span>F</span><span>our Seasons Hotels and Resorts can offer what many hospitality professionals dream</span><span>of;</span><span>the opportunity to build a life-long career with global potential and a real sense of pride in work well done. We look for talent who share the Golden Rule – people who, by nature, believe in treating others as we would have them treat us. As Four Seasons works towards phenomenal growth in the</span><span>next decade, our most valuable partners continue to be our talent, with whom we have a strong relationship based on the</span><span>Golden Rule. This relationship is made tangible by the awards received year after year by Four Seasons on a corporate level, as well as by our hotels, resorts, and residences around the world, making us an undisputed “employer of choice.” </span></span></p><br><br><p><br> <br><b>What we offer:&nbsp;</b><br>• Competitive Salary, wages, and a comprehensive benefits package<br>• Excellent Training and Development opportunities<br>• Employee Discount for stays at any Four Seasons worldwide<br>• Complimentary Dry Cleaning for Employee Uniforms<br>• Complimentary Employee Meals</p><br><br><br><br><br><br><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Design, develop, and maintain embedded software unit testing for automotive ECUs Integrate software components into ECU platforms and ensure compatibility with hardware and vehicle network constraints. Perform root cause analysis on software defects, communication issues, and ECU malfunctions. Use diagnostic tools such as CANoe, CANalyzer, UDS (ISO 14229), DoIP, OBD II , and vehicle logs to identify issues. Use flashing tool to Flash the SW in the ECUs Develop and validate UDS diagnostic services , DTCs (Diagnostic Trouble Codes), and fault memory strategies. Analyze communication traces (CAN, LIN, FlexRay, Ethernet) to detect anomalies or performance issues. Support integration tests on benches, HIL systems, and in-vehicle testing. Ensure compliance with automotive standards such as AUTOSAR , ISO 26262 (functional safety) , ASPICE , and cybersecurity principles. Create and maintain documentation (SRS, SDD, design reviews, traceability matrices). Collaborate with testing teams to define validation strategies and ensure robust test coverage.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Engineering degree (Master s level, Bac+5) in Embedded Systems, Electronics, or equivalent. Strong skills in technical coordination, planning, and risk management. Excellent communication skills and strong team spirit. Professional level of English required. Proficiency in embedded C/C++ programming and real time systems. Strong knowledge of in vehicle communication protocols (CAN, LIN, FlexRay, Ethernet). Experience with diagnostic standards and tools: UDS (ISO 14229), ISO 15765, OBD II Vector tools (CANalyzer, CANoe, CANape) Ability to interpret logs, traces, and memory dumps for precise diagnostic analysis. Familiarity with AUTOSAR stacks (Classic or Adaptive). Experience with development processes following ASPICE or V Model.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> Company culture : <p><strong>Alten Maroc </strong>is defined by a deeply <strong>collaborative</strong> culture, focused on people, trust, and strong team support, with hands-on managers who guide and develop talent.<br> This environment is enhanced by a strong drive for <strong>innovation</strong>, encouraging creativity, initiative, and experimentation across projects.<br> A structured and disciplined organization ensures <strong>efficiency</strong>, rigor, and quality in engineering delivery.<br> <strong>Performance</strong> and ambition are part of the culture as well, supporting collective success while maintaining a positive and caring atmosphere. </p><br><br> <br> Job : <p>The MBD engineer will have the following missions:</p><br><br><ul><li>Conception and modeling: Develop system functional models under MATLAB/Simulink while respecting Model-Based Design (MBD) principles.</li><li>Compilation and debugging: Compile and analyze C code generated from models, ensure the correction of issues.</li><li>Validation and testing: Perform MIL (Model-in-the-Loop), SIL (Software-in-the-Loop), and B2B (Back-to-Back) tests to ensure the conformity of models and code.</li><li>Requirements analysis: Review and validate functional specifications to ensure their consistency and feasibility.</li><li>Software problem analysis: Identify, diagnose, and resolve issues related to models or embedded code</li></ul> <br> Required profile : <ul><li>Holder of a degree in electronics engineering, embedded systems, or systems engineering, with 1 to 2 years of minimum experience.</li><li>Very good level of English is required.</li><li>Proficiency in MATLAB/Simulink (including Model Advisor, Design Verifier)</li><li>Use of Git/GitHub for configuration management</li><li>Proficiency in CANOE/CANalyzer for CAN network simulation and analysis</li><li>Good level in C programming for embedded development</li><li>Knowledge of UDS and OBD protocols (major asset).</li><li>Knowledge of ISO 26262 (automotive functional safety)</li><li>Knowledge of AUTOSAR (automotive software architecture)</li><li>Application of MISRA C guidelines for embedded code</li></ul> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br> Company culture : <p><strong>Alten Maroc </strong>is defined by a deeply <strong>collaborative</strong> culture, focused on people, trust, and strong team support, with hands-on managers who guide and develop talent.<br> This environment is enhanced by a strong drive for <strong>innovation</strong>, encouraging creativity, initiative, and experimentation across projects.<br> A structured and disciplined organization ensures <strong>efficiency</strong>, rigor, and quality in engineering delivery.<br> <strong>Performance</strong> and ambition are part of the culture as well, supporting collective success while maintaining a positive and caring atmosphere. </p><br><br> <br> Job : <p>Within the ALTEN Service Center, the RAMS Engineer will work on railway projects to support the client in testability and failure analysis activities. They will contribute to improving system maintenance by analyzing failure modes and their impacts.</p><br><br><p><strong>Main responsibilities</strong></p><br><br><ul><li>Create and maintain fault code databases.</li><li>Perform functional analysis of failure causes.</li><li>Identify and define equipment failure modes.</li><li>Classify equipment based on its criticality.</li><li>Identify the location of equipment affected by faults.</li><li>Perform analysis of failure effects on sub-systems and on the train.</li><li>Develop and update <strong>FMECA</strong> analyses.</li><li>Produce testability deliverables (Excel databases, analysis reports, tracking tables).</li><li>Ensure the quality and timely delivery of deliverables.</li><li>Collaborate with RAMS, maintenance teams, and the client's technical experts.</li></ul> <br> Required profile : <ul><li>Master's degree (Bac+5) in industrial engineering, electrical engineering, mechanical engineering, embedded systems, or equivalent.</li><li>Minimum 3 years of experience.</li><li>Previous experience in RAMS, maintenance, or functional safety is a plus.</li><li>Knowledge of <strong>FMEA/FMECA</strong> methodologies, functional analysis, and reliability.</li><li>Good analytical and problem-solving skills.</li><li>Rigor, autonomy, and teamwork spirit.</li><li>French: B2/C1</li><li>English: B2/C1</li></ul><p><strong>Technical skills</strong></p><br><br><ul><li>RAMS</li><li>FMEA / FMECA</li><li>Failure Mode Analysis</li><li>Functional Analysis</li><li>Industrial Maintenance</li><li>Excel (advanced level)</li><li>Microsoft Word</li><li>Technical English</li></ul><p><strong>Advantages</strong></p><br><br><ul><li>Knowledge of the railway sector (Alstom, Siemens, CAF, Hitachi…).</li><li>Familiarity with standards EN 50126 / EN 50128 / EN 50129.</li><li>Experience in an international environment.</li></ul> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company culture : <p><strong>Manpower Agences</strong> operates within a highly balanced culture, where <strong>collaboration</strong> plays a key role in the work environment. The company values close leadership, trust and collective engagement, while placing equal importance on <strong>performance</strong> and achieving results. This dynamic is supported by a <strong>structured organizational approach</strong>, promoting rigor, efficiency and quality execution. Openness to innovation further strengthens this balance, supporting adaptability in an evolving market. </p><br><br> <br> Job : <p>As part of our business development, we are looking for a Civil Engineering Engineer specializing in reinforced concrete structures. You will be responsible for the design, sizing, and optimization of structures, while ensuring coordination between the design, manufacturing, and site teams. Your expertise will contribute to guaranteeing the quality, safety, and economic performance of projects.</p><br><br><p>Your missions<br>Studies and structural calculations<br>Perform sizing of reinforced concrete elements.<br>Determine the necessary steel sections in accordance with current standards.<br>Calculate lap lengths, reinforcement, and shaping of rebar.<br>Design and development of execution plans<br>Supervise or carry out structural modeling.<br>Produce and validate execution plans.<br>Prepare rebar lists: cutting lists, quantities, and shaping details for manufacturing.<br>Technical and economic optimization<br>Analyze and optimize the quantities of steel used in structures.<br>Improve steel/concrete ratios to reduce construction costs while ensuring structural safety and compliance.<br>Propose innovative and efficient technical solutions.<br>Coordination with manufacturing and site<br>Act as the interface with rebar cutting and shaping factories.<br>Plan deliveries according to work progress.<br>Check the compliance of reinforcement on site before concrete pouring.<br>Support operational teams in resolving technical issues.</p><br><br> <br> Required profile : <p>Graduate of a Civil Engineering school or equivalent.<br>Significant experience in the calculation and design of reinforced concrete structures.<br>Proficiency in structural calculation and modeling software.<br>Good knowledge of construction standards and reinforcement rules.<br>Ability to analyze and optimize technical solutions with a focus on economic performance.<br>Comfortable coordinating with multiple stakeholders (design office, factory, site).<br>Rigor, organizational skills, autonomy, and team spirit.<br>Excellent communication and prioritization skills.</p><br><br> <br><br> </div>