وظائف مهندس ميكانيكا معدات ثقيلة

<p><strong>Role: Preventive and Corrective Maintenance :</strong></p><ul><li>Carry out scheduled maintenance to reduce downtime.</li><li>Clean, lubricate, and adjust mechanical components.</li><li>Detect early signs of wear, misalignment, corrosion, or damage.</li><li>Diagnose mechanical, electrical, or pneumatic failures.</li><li>Repair or replace damaged components.</li><li>Restore equipment to operational condition quickly and safely.</li><li>Document faults, actions taken, and replacement parts used.</li></ul><p><strong>Desired Candidate Profile</strong></p>Technician/ Licence diploma ( electronic/ Mechanic )

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job : <p>We are looking for a Maintenance Technician to join our team. This position involves carrying out preventive and corrective maintenance on industrial equipment, as well as optimizing production processes. The technician will work in a dynamic and demanding environment to ensure the operational continuity of the facilities.</p><br><br><p>Missions:</p><br><br><p>Ensure preventive and corrective maintenance of industrial machines and equipment.<br>Diagnose and quickly resolve breakdowns to minimize production downtime.<br>Participate in the installation, commissioning, and calibration of new facilities.<br>Track and update technical documentation and intervention reports.<br>Collaborate with production teams to optimize processes and ensure operational quality.</p><br><br> <br> <br> Required profile : <p>This Maintenance Technician position requires an experienced candidate, capable of effectively managing equipment maintenance and solving technical problems while ensuring compliance with current standards.</p><br><br><p>Profile:</p><br><br><p>Education: Bac+2 or higher.<br>Type of Bac: Technical.<br>Degree: BTS, DUT, Bachelor's, or Master's.<br>Experience: More than 4 years of experience in industrial or technical maintenance.<br>Age: Under 30 years old.<br>Qualifications and skills:</p><br><br><p><br>Technical Skills:</p><br><br><p>Electrical engineering.<br>Power electronics.<br>Automation.<br>Hydraulics and pneumatics.<br>Industrial maintenance.</p><br><br><p><br>Soft Skills:</p><br><br><p>In-depth knowledge of equipment and production processes.<br>Ability to quickly diagnose and repair technical breakdowns.<br>Team spirit and good communication skills.<br>Proficiency in maintenance tools and software.</p><br><br> <br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><font dir="auto" ><font dir="auto" >About the job offer: Capgemini Engineering, a global leader in engineering services, brings together teams of engineers, scientists, and architects to help the world's most innovative companies unlock their potential. From self-driving cars to life-saving robots, our digital and software technology experts think outside the box, delivering unique R&amp;D and engineering services across all industries. Join us for a career full of opportunities, where you can make a difference and no two days are the same.</font></font></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2><font dir="auto" ><font dir="auto" >Search profile:</font></font></h2><ul><li><font dir="auto" ><font dir="auto" >Education: Bac+5 in Industrial Engineering, Mechanical Engineering, Supply Chain, Operations Management or equivalent.</font></font></li><li><font dir="auto" ><font dir="auto" >Experience: Minimum 5-8 years of experience in an industrial environment, engineering operations, supply chain or change management.</font></font></li><li><font dir="auto" ><font dir="auto" >Extensive experience in process management and handling complex issues.</font></font></li><li><font dir="auto" ><font dir="auto" >Experience in cross-functional coordination and team support.</font></font></li><li><font dir="auto" ><font dir="auto" >Technical Skills: Very good command of ERP, PLM systems and technical data management tools.</font></font></li><li><font dir="auto" ><font dir="auto" >Strong skills in impact analysis, risk management and problem solving.</font></font></li><li><font dir="auto" ><font dir="auto" >Mastery of performance indicators and continuous improvement processes.</font></font></li><li><font dir="auto" ><font dir="auto" >Experience in auditing, data quality control and process governance.</font></font></li><li><font dir="auto" ><font dir="auto" >Ability to lead optimization and standardization initiatives.</font></font></li><li><font dir="auto" ><font dir="auto" >Behavioral Skills: Leadership and ability to influence.</font></font></li><li><font dir="auto" ><font dir="auto" >Excellent communication and coordination skills.</font></font></li><li><font dir="auto" ><font dir="auto" >Taking initiative and results-oriented.</font></font></li><li><font dir="auto" ><font dir="auto" >Strong analytical and decision-making skills.</font></font></li><li><font dir="auto" ><font dir="auto" >Collaborative spirit and a sense of mentorship.</font></font></li></ul><p></p></section>

<p>Diagnose and repair electrical faults in rooms, public areas, and technical zones. Install new electrical equipment and systems as required by the department. Control the compliance of installations with current safety standards. Read and interpret electrical schematics and technical plans. Keep intervention reports and maintenance logs up to date. Coordinate electrical work with external providers when necessary. Intervene quickly in case of breakdown or malfunction report. Perform daily technical rounds to prevent anomalies. Implement actions to reduce energy consumption. Manage spare parts inventory and anticipate supply needs. Collaborate with other technicians to ensure the overall maintenance of the hotel. Apply Accor/Fairmont procedures regarding hygiene, safety, and quality. Participate in internal audits and continuous technical training. Represent the professional and upscale image of the Fairmont brand through the quality of its interventions.</p><p><strong>Desired Candidate Profile</strong></p><p>Diploma in electrical engineering, electromechanics, industrial maintenance, or equivalent field. First professional experience in electricity, technical maintenance, or electrical engineering, ideally acquired within a hotel establishment or similar environment.</p><ul><li><strong>Technical Skills:</strong> Excellent command of low-voltage electrical installations, electrical equipment, and electrical distribution systems in a hotel establishment. Good command of installation, preventive and corrective maintenance, troubleshooting, and repair operations for electrical equipment and installations. Ability to read and interpret electrical schematics, technical plans, and maintenance documents. Good command of the use of electrical measurement and diagnostic devices, as well as the tools and equipment necessary for interventions. Knowledge of electrical systems related to hotel equipment and installations, particularly lighting, electrical panels, sockets and power supplies, technical equipment, generator sets, and backup systems. Knowledge of preventive maintenance principles and ability to identify breakdown risks to ensure the continuity of operations. Ability to intervene quickly and effectively in case of breakdown or incident, while limiting the impact on the customer experience and comfort.</li><li><strong>Personal Qualities:</strong> Excellent analytical, diagnostic, and technical problem-solving skills. Responsiveness, availability, and ability to effectively manage emergency situations and priority interventions. Autonomy, initiative, and ability to make appropriate decisions in compliance with establishment procedures and standards.</li><li><strong>Languages:</strong> Good command of French, both oral and written. Command of English is an asset.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job : <p>Mission:<br>• Deploy the preventive and corrective maintenance policy for electrical equipment in water facilities;<br>• Ensure the proper functioning of electrical and automation equipment in water facilities;<br>• Develop the investment program for the upgrading and renewal of electrical equipment;<br>• Ensure compliance with provisions relating to the control of risks linked to the sanitary safety of water within the framework of the water sanitary safety management plan (PGSSE) and the application of ethical rules and anti-corruption systems.</p><br><br><p>Activities:<br>• Ensure the planning and preventive, corrective, and renewal maintenance of electrical installations, sensors, automation, and remote management systems across all drinking water sites;<br>• Ensure on-call supervision of intervention teams<br>• Monitor the availability rate of electrical equipment and the progress of maintenance schedules;<br>• Diagnose and analyze incidents;<br>• Be a source of proposals for improvement and innovation solutions;<br>• Ensure the optimization of the use of resources made available to the department;<br>• Ensure the mobilization of necessary resources to achieve objectives set by its Management;<br>• Develop and update clear work procedures for employees that allow for the proper execution of operations and their effective control;<br>• Manage human resources under its responsibility: set objectives, monitor results and ensure their improvement, develop their skills and ensure knowledge transfer within the team;<br>• Monitor and ensure the maintenance of performance and continuous improvement of the quality management system according to the requirements of current standards in order to constantly improve the efficiency and effectiveness of processes;<br>• Supervise and lead the review of control activities within its scope and ensure the implementation of action plans resulting from audit missions and internal control reviews;<br>• Ensure the strict application and compliance with regulatory and contractual provisions regarding hygiene, safety, and environmental protection at work.<br>&nbsp;</p><br><br> <br> <br> Required profile : <p>Academic background:<br>State-recognized engineering degree in Electrical Engineering, Automation, or equivalent</p><br><br><br><p>Professional experience:<br>More than 3 years of experience in a similar role<br>Required skills:<br>• Good command of high and low voltage electricity.<br>• Proficiency in programmable logic controller (PLC) programming languages.<br>• Mastery of electrical risks.<br>• Good knowledge of instrumentation and remote management equipment.<br>&nbsp;</p><br><br> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company culture : <p><strong>Groupe Label'Vie - Carrefour</strong> is characterized by a culture strongly rooted in <strong>collaboration</strong>, where people, teamwork, and supportive leadership play a central role. The company promotes a collaborative environment built on trust, accountability, and talent development, enabling employees to contribute fully to collective success. This people-centered approach is complemented by a strong focus on <strong>performance</strong>, encouraging achievement and results-driven excellence, as well as a structured organization that ensures efficiency and service quality. Innovation further strengthens this balance by fostering adaptability and continuous improvement. Together, these dimensions create a dynamic, engaging, and high-performing workplace. </p><br><br> <br> Job : <p>Assigned to the Information Systems Department, you will be responsible for ensuring the availability and compliance of IT equipment provided to users.</p><br><br><p><br>Your main tasks:</p><br><br><ul><li>Provide first-level support and handle user incidents related to the use of store tools (Sales tools, mobility), escalate to central support - Helpdesk - if necessary.</li><li>Report malfunctions related to central IS to the central support team - Helpdesk - and follow up on them.</li><li>Manage hardware problems in stores (cash registers, scales, PDAs, switches/firewalls...).</li><li>Oversee hardware installations during store openings (cash registers, scales).</li><li>Install PCs to be provided to store users.</li><li>Conduct inventories of store equipment.</li><li>Prepare intervention reports when dealing with store-level problems.</li></ul> <br> Required profile : <ul><li>Bac +2/Bac+3 degree in IT (infrastructure, support, or equivalent).</li><li>Knowledge of IT tools.</li><li>Mastery of the group's systems and solutions.</li><li>Ability to install and integrate hardware (network equipment, peripherals) in the production environment and configure resources.</li><li>Mastery of methods for analyzing incidents and server performance.</li><li>Mastery of IT and telecom security rules.</li><li>Ability to write installation and operation manuals for network and telecom equipment.</li></ul> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job : <p>Join a dynamic company in the <strong>Electricity</strong> sector as a <strong>Tooling Technician</strong>. Based in <strong>Casablanca</strong>, this opportunity will allow you to actively contribute to operational excellence. Your <strong>main mission</strong> will be to ensure the maintenance, repair, and optimization of the tooling and equipment used in our processes.</p><br><br><p>The main goal is to guarantee the availability and optimal performance of production tools, in order to support the teams in achieving production, quality, and safety objectives. This involves minimizing unplanned downtime and anticipating maintenance needs.</p><br><br><p>Your days will be structured by various missions, including:</p><br><br><ul><li>Perform <strong>preventive and corrective maintenance</strong> operations on tooling and machinery.</li><li>Diagnose breakdowns and carry out necessary repairs as quickly as possible.</li><li>Participate in the installation and commissioning of new equipment.</li><li>Contribute to the continuous improvement of maintenance and production processes.</li><li>Ensure compliance with <strong>safety</strong> regulations in carrying out your tasks.</li><li>Document the interventions carried out.</li></ul> <br> <br> Required profile : <p>To excel in this role, a <strong>Bac +2</strong> level of education is required. A specialization in <strong>Production</strong>, <strong>Quality</strong>, <strong>Safety</strong>, or <strong>Maintenance</strong> would be a major asset for understanding the technical challenges of our business.</p><br><br><p>Intermediate professional experience in a similar position is sought. This period should have allowed you to develop a solid understanding of issues related to industrial maintenance and tooling.</p><br><br><p>Beyond your education and experience, here are the skills that will make a difference:</p><br><br><ul><li>Mastery of <strong>mechanical and electrical maintenance</strong> techniques.</li><li>Ability to read and interpret <strong>technical drawings</strong>.</li><li>Rigor, autonomy, and organizational skills.</li><li>Good <strong>diagnostic</strong> and problem-solving skills.</li><li>Team spirit and good interpersonal skills.</li><li>Knowledge of safety standards applicable in the electricity sector.</li></ul><p>If you see yourself in this description and are ready to take on this exciting challenge, don't wait any longer! Apply now using the button below "Send my CV to the recruiter" to join our team.</p><br><br> <br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><font dir="auto" ><font dir="auto" >Job Description </font></font><div> <p><font dir="auto" ><font dir="auto" >- Participate in gathering technical and functional requirements with the architect,</font></font></p> <p><font dir="auto" ><font dir="auto" >- Develop new flows/APIs, maintain and evolve existing flows/APIs,</font></font></p> <p><font dir="auto" ><font dir="auto" >- Actively contribute to the maintenance and improvement of the MuleSoft platform,</font></font></p> <p><font dir="auto" ><font dir="auto" >- Analyze and resolve production incidents</font></font></p> <p><font dir="auto" ><font dir="auto" >- Apply MuleSoft best practices</font></font></p> <p><font dir="auto" ><font dir="auto" >- Write the technical and operational documentation.</font></font></p></div></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph">Qualifications </p><div> <p><font dir="auto" ><font dir="auto" >- Graduate engineer with a minimum of 3 years of overall experience</font></font></p> <p><font dir="auto" ><font dir="auto" >- 2 years of experience on the MuleSoft ecosystem.</font></font></p> <p><font dir="auto" ><font dir="auto" >- Obtaining a MuleSoft certification is a plus</font></font></p> <p><font dir="auto" ><font dir="auto" >- Proficiency in spoken and written English</font></font></p></div><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Job Purpose</b> <br><p><span><span>To manage and control the Air Arabia&nbsp;stores&nbsp;inventory and daily activities including receipt,&nbsp;storage&nbsp;and release of all the tools, equipment, and spare parts used for maintenance of Air Arabia and&nbsp;Third-Party&nbsp;aircrafts. Ensures all activities are carried and recorded in accordance with Company’s policies and procedures and as per regulatory bodies’ rules and regulations.&nbsp;</span></span></p><br><br><b>Key Result Responsibilities</b> <br><ul><li><span><span>Handles and maintains the stock level for the daily demanded items and routine jobs, this includes toolboxes and kits, wheels, batteries, oils, etc.&nbsp;</span></span></li><li><span><span>Ensures all items and components are available in place and on time to execute maintenance tasks and secure the availability and safe release of aircrafts.&nbsp;</span></span></li><li><span><span>Carries out daily checks and inspections in assigned storage areas to ensure correct storage conditions are maintained such as Temperature and Humidity Control, safety and health conditions, risk hazards, etc. </span></span></li><li><span><span>Handles the allocation of tools and parts in the store as per instructions received from line manager/ AOG desk in-charge; coordinates the replacement of consumable items and updates system accordingly.&nbsp;</span></span></li><li><span><span>Pre-loads system with requirements for ADD/MDD to be ready for retrieval on time.&nbsp;</span></span></li><li><span><span>Issues daily tool boxes and kits as well as spare parts and components based on the maintenance plans for Air Arabia aircrafts routine jobs.&nbsp;</span></span></li><li><span><span>Ensures all tools and equipment to be used by Maintenance teams are checked and kept serviceable at all times; advises the “Rotables Team” with any unserviceable tools or parts received in stores.&nbsp;</span></span></li><li><span><span>Updates and reviews the AMOS system to record and monitor all activities related to received and stored parts and equipment taking into consideration material shelf life, tools calibration, shift, handover log book, critical movements, etc., all carried in accordance with agreed formats and circulation terms.&nbsp;</span></span></li><li><span><span>Ensures all issued but unused parts are credited back to the stock system and returned to the main stores as per Company’s adopted procedures.&nbsp;</span></span></li><li><span><span>&nbsp;Supports the line manager in implementing and maintaining the safety measures, facilities adequacy and cleanliness, storage conditions and needs, communication and overall performance of the Store.&nbsp;</span></span></li><li><span><span>Provides ad-hoc inventory and stores support to both Air Arabia and Third Party aircrafts whenever needed.&nbsp;</span></span></li><li><span><span>Prepares stock report on regular basis; reports any errors on system, identifies causes for errors and recommends corrective measures to ensure no re-occurrence.&nbsp;</span></span></li></ul><br>. <br><b>Qualifications (Academic, training, languages)</b> <br><ul><li><span><span>Diploma or certificate in a related field from a recognized institution combined with needed experience and exposure is acceptable; a bachelor degree in any discipline is preferred.</span></span></li><li><span><span>Capable of using technology systems; proficient in Microsoft Office.</span></span></li><li><span><span>Very good communication skills (verbal, written) expressed in high level of accuracy.</span></span></li><li><span><span>Fluent in English Language.</span></span></li><li><span><span>Valid Driving License of assigned location</span></span></li></ul><br><b>Work Experience</b> <br><ul><li>The ability to work a rotating shift pattern. </li><li>1-2 years of related working experience in a similar capacity within the aviation industry; experience with low cost airline is a plus. </li><li>Working experience on inventory soft-wares shall be treated as an advantage. </li><li>Has necessary working experience and exposure to respective civil aviation rules and regulations pertaining to acceptance, storage and issuance of technical spare parts and associated equipment used for aircrafts maintenance. </li><li>Knowledge and completion of IATA Dangerous Goods Regulations training will be an advantage. </li><li>Possesses very good organizing and time management skills. </li><li>Proven skills in working with data and resources in a cost-effective manner. </li><li>Dependable, self-initiative, takes ownership, and displays energy and enthusiasm. </li><li>Multi-task oriented with high attention to both results and details. </li><li>Capable of working hard and under pressure. </li><li>Physically fit and dynamic, capable of carrying heavy equipment and moving between stores. </li><li>Demonstrates the ability to contribute and successfully deliver against business strategy and set KPIs. </li></ul><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><b>Join Yazaki. Connect to the future.&nbsp;</b></p><br> <p><b>Country</b>:&nbsp;Morocco (MA)&nbsp;<br> <b>City</b>:&nbsp;Kenitra<br> <b>Worksite / Location</b>:&nbsp;Kenitra Plant 1&nbsp;</p><br> <p><b>Job Function</b>:&nbsp;EDS_Manufacturing (PP/IE)&nbsp;<br> <b>Job Discipline</b>:&nbsp;&nbsp;<br> <b>Job Family</b>:&nbsp;Production Preparation/Industrial Engineering (PL)</p><br> <p>Founded in 1929, Yazaki is a Japanese full systems supplier of wire harness, electrical, data products and solutions enabling vehicle electrification, connectivity, and autonomy integration. More than 235,000 committed and highly motivated employees in 45 countries make us one of the most successful international automotive suppliers. Join a family-owned company committed to being environmentally friendly in every aspect of its business, contributing to society, and inspiring trust. To strengthen our team, we are looking for a&nbsp;IE/PP Specialist L1 in our plant in [[location]].</p><br> <p><strong><u>Qualifications:</u></strong></p><br> <ul> <li>Level of studies: Bac+5 Engineer or master’s degree in industrial engineering, Mechanical Engineering, Electrical Engineering</li> <li>Experience: Minimum of 1 years of experience in automotive or similar area.</li> <li>Language: Fluent speaker of French and English</li> <li>Soft skills: Good communication, Problem solving.</li> </ul> <p><span><strong>Responsibility:</strong></span></p><br> <ul> <li>Analyze customer specifications from YAZAKI drawings and share relevant information with the Cross-Functional Team (CFT) to ensure proper reflection on the production line.</li> <li>Ensure timely data preparation and sharing across all project phases in alignment with project milestones.</li> <li>Perform wire tuning activities at each phase of the project.</li> <li>Participate in, support the coordination of, and contribute to the implementation of new projects.</li> <li>Manage and report on Production Preparation KPIs.</li> <li>Ensure compliance with Quality Management System (QMS) requirements (IATF 16949), adherence to YEL/YMOK procedures, and application of all work standards and rules related to Environment, Health &amp; Safety (EHS) and 5S practices.</li> <li>Ensure that the plant has the capability to meet customer requirements (CR).</li> </ul> <br> <p>At Yazaki, we are&nbsp;committed to providing equal employment opportunities for everyone which extends to all aspects of the employment relationship.&nbsp;</p><br> <p>We are looking forward to receiving&nbsp;your application and to get to know you. Please apply by clicking the 'Apply Now' button. We wish you all the success in your application!&nbsp;</p><br> <p>Ps. Didn't find&nbsp;what you are looking for?<br> Take a look at our&nbsp;careers page! Be careful though, you might find your next dream job.&nbsp;</p><br> </div>

<p>POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day s activities and problems that occur to the other shifts using approved communication programs and standards. Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TV's and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Education: High school diploma or G.E.D equivalent.</li><li>Related Work Experience: Some experience in general maintenance, exterior and interior surface preparation and painting. Experience in hotel engineering or maintenance a plus.</li><li>Supervisory Experience: No supervisory experience.</li><li>License or Certification: Driver s License</li></ul>

<p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Job Description Contribute to improving productivity by providing technical support within the workshop, ensure the smooth running of production by putting in place the necessary means and guaranteeing their capability, support manufacturing by providing technical expertise on defects related to the manufacturing process. - Validate the manufacturing process in accordance with the requirements of the design specifications - Draft the necessary documents for the production staff to carry out the processes - Assist production in case of problems related to the processes and manufacturing and control equipment - Organize workstations - Study the implementation of new equipment and processes - Participate from the development phase to the end of the production run - Analyze and take into account feedback from the workshop within the framework of continuous improvement - Conduct validation and characterization plans for test benches and tools - Participate in product validation and characterization tests - Ensure process stability - Conduct expert assessments to isolate root causes through experimentation - Propose solutions to product problems - Analyze test results - Launch tests on the various test equipment - Perform visual inspections - Analyze the Results and performance curves of products from tests - Knowledge and understanding of the operation of tested products - Handling non-conformities - Implementation and monitoring of process FMEAs - Ensuring compliance with the workshop's technical reference framework: technical specifications, group standards.&nbsp;</font></font></p><p><strong>Desired Candidate Profile</strong></p><p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Job Requirements: A Master's degree (Bac +5) in Mechanical/Electromechanical Engineering, multidisciplinary experience (technical and industrial management), and strong analytical skills. Excellent interpersonal skills and a passion for teamwork. Autonomous, proactive, and creative. A good communicator (interacting with multiple stakeholders: Engineering France, Methods, Production, clients, suppliers). But what else? (Advantages, specific features, etc.) Knowledge of electrical engineering - Knowledge of computer science - Knowledge of mechanics - Ability to read and understand plans from design offices (electrical/mechanical) - Knowledge of instrumentation and measurement - Knowledge of test benches/software - Expertise in problem-solving approaches (Brainstorming, 8D, Ishikawa diagram, FMEA, 5W2H) - Use of digital tools (Minitab/SPC/SAP/Microsoft Office Suite) - Statistical methods or tools, Six Sigma - Writing of notes and technical test reports</font></font></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job : <ul><li>Drive and maneuver a telescopic handler on construction sites or industrial sites while respecting safety instructions</li><li>Perform handling, lifting, and placement operations for loads (materials, pallets, equipment), sometimes at height</li><li>Carry out daily checks of the machine (general condition, fluid levels, safety devices, tires),</li><li>Report any technical issues to maintenance teams</li><li>Coordinate maneuvers with ground teams (foreman, handlers)</li><li>Ensure compliance with safety zones and the machine's load capacities.</li></ul> <br> <br> Required profile : <ul><li>Valid telescopic handler certification (category R482 or recognized Moroccan equivalent)</li><li>Experience in operating a telescopic handler on construction, industrial, or logistics sites</li><li>Good knowledge of handling safety rules, thoroughness, vigilance, and organizational skills</li><li>Ability to work outdoors and adapt to different types of construction sites.</li></ul><p>Technical skills:</p><br><br><ul><li>Proficiency in lifting and stacking maneuvers,</li><li>Reading load indicators (charts)</li><li>Knowledge of interchangeable equipment (forks, bucket, skip, spreader bar)</li><li>Adherence to machine stability and balance procedures.</li></ul><p>Conditions: Availability for travel as required by construction sites.</p><br><br> <br><br> </div>

<p>Assign to validation engineers Test norm,Catnet, PLM, and JIRA task: Interface with TPM/ITPL for vehicle/part orders, especially during project start-up. - Collaborate/Support on test list creation and revision with the team (test engineer and service design) Ensure the program performance engineers meet all milestone deliverables: PIV creation: based on vehicle ordered , vehicles phases and scopesheet of funcionalities PIV sharing with key stakholders outside ICAS org. Ensure PIV respects milestone and KPI, monitoring execution and progress Review all slides and presentations of program /project: -Update validation results in ICAS decks and KPI dashboards. -Review and approve slides and for program/project updates Collect &amp; study all requirements for project: Collect and analyze all project requirements to ensure comprehensive test coverage Define detailed validation project/program plan :Estimate FTE and means required for validation activities and critical path Support PE into Issue triage meetings and Issue escalation meetings: Lead progress meetings with SSTM, PM CCVP, CX, and vehicle teams - Facilitate technical discussions and problem resolution across teams. - Participate in issue triage and escalation meetings -Collaborate/Support on test list creation and revision with the team (test engineer and service design) - Join into technical and management meeting where ICAS deliverables are discussed Report to top management progreams /projects results and KPI : -Build KPI deck with all info and ICAS standards - Provide weekly/daily progress reports on validation activities</p><p><strong>Desired Candidate Profile</strong></p><p><b>Qualifications</b></p><p><b>Profile :</b></p><ul><li>Bac+5</li><li>Exp rience : 1 2 ans</li><li><b>Comp tences :</b></li><li>Bonne connaissance des processus et outils de validation (Test Norm, Catnet, PLM, JIRA).</li><li>Capacit analyser les exigences et d finir des plans de test.</li><li>Comp tences en leadership et coordination d' quipe.</li><li>Exp rience en planification et suivi des KPI.</li><li>Excellentes capacit s de communication et de n gociation.</li><li>R solution de probl mes et pens e critique.</li><li>Anglais</li><li>Exp rience en pr vision des co ts de projet</li><li>JIRA PLM</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company culture : <p><strong>HUIR – International University Hospital of Rabat</strong> operates within a predominantly <strong>collaborative culture</strong>, where people, trust, and teamwork are central to daily practices. The hospital promotes a close and supportive management style focused on empowerment, guidance, and collective commitment. This collaborative foundation is reinforced by a strong <strong>innovation dimension</strong>, encouraging initiative, experimentation, and continuous improvement. It is supported by structured processes ensuring reliability and efficiency, while competitive dynamics play a clearly secondary role. </p><br><br> <br> Job : <p>The Rabat International University Hospital (HUIR) is looking for a qualified and motivated <strong>Senior Network Engineer (M/F)</strong> to join our team. They will be responsible for the design, deployment, operation, and evolution of the institution's network infrastructures. They will ensure the availability, performance, security, and resilience of network architectures in line with business needs and the organization's strategic directions.</p><br><br><p><strong>Network Design and Architecture</strong></p><br><br><ul><li>Design and evolve LAN, WAN, WLAN, and Datacenter network architectures.</li><li>Define technical standards and best practices for operation.</li><li>Participate in digital transformation and infrastructure modernization projects.</li><li>Carry out technical studies and network architecture diagrams.</li></ul><p><strong>Administration and Operation</strong></p><br><br><ul><li>Manage network equipment (switches, routers, Wi-Fi controllers, firewalls, load balancers).</li><li>Ensure network availability and performance.</li><li>Supervise and optimize communication infrastructures.</li><li>Handle complex Level 2 and 3 incident management.</li></ul><p><strong>Cisco Networks and SD-Fabric</strong></p><br><br><ul><li>Design, deploy, and administer Cisco Enterprise environments.</li><li>Implement and operate infrastructures based on Cisco SD-Access (SD-Fabric).</li><li>Administer Cisco DNA Center solutions and network segmentation architectures.</li><li>Ensure automation and orchestration of network services.</li></ul><p><strong>Network Security</strong></p><br><br><ul><li>Implement network security policies.</li><li>Administer access control and segmentation solutions.</li><li>Participate in security audits and vulnerability management.</li><li>Design highly available and secure architectures.</li></ul><p><strong>Documentation and Governance</strong></p><br><br><ul><li>Write and maintain technical documentation.</li><li>Develop operational and service continuity procedures.</li><li>Participate in defining specifications and evaluating technical solutions.</li><li>Ensure knowledge transfer to technical teams.</li></ul> <br> Required profile : <ul><li>Proficiency in TCP/IP, OSPF, BGP, VRRP, HSRP, STP, and QoS protocols.</li><li>Excellent knowledge of LAN, WAN, WLAN, and Datacenter architectures.</li><li>Proficiency in high availability and network redundancy technologies.</li><li>Excellent command of Cisco Catalyst and Nexus equipment.</li><li>Proven expertise in Cisco SD-Access (SD-Fabric).</li><li>Good command of Cisco DNA Center.</li><li>Management of Cisco Wireless Controllers (WLC) and wireless infrastructures.</li><li>Proficiency in Firewall solutions (Palo Alto, Fortinet, Cisco, or equivalent).</li><li>NAC, network segmentation, SSL/IPSec VPN.</li><li>Good knowledge of cybersecurity applied to network infrastructures.</li><li>Knowledge of Linux and Windows Server environments.</li><li>Monitoring tools: PRTG, Centreon, Zabbix, SolarWinds, or equivalents.</li><li>Network automation (Python, Ansible, REST API) is a plus.</li><li>State Engineering degree in Networks and Telecommunications, Computer Science, or equivalent (Master's degree - Bac+5).</li><li>Minimum 7 years of experience in enterprise network administration and architecture.</li><li>Significant experience in designing and operating complex Cisco infrastructures.</li><li>Participation in Cisco SD-Access / SD-Fabric deployment projects.</li><li>Cisco CCNP Enterprise certification (mandatory or highly desirable).</li><li>Network security certifications are a plus.</li><li>Strong analytical and problem-solving skills.</li><li>Initiative and autonomy.</li><li>Rigor and organizational skills.</li><li>Excellent writing and communication skills.</li><li>Ability to work in a team and manage cross-functional projects.</li></ul> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job : <p><strong>Field Sales Representative / Sales Representative - Medical Devices</strong></p><br><br><p>LONGEVITEK is recruiting an experienced Field Sales Representative in medical devices to develop its portfolio of doctors, clinics, hospitals, and medical centers in Morocco. A minimum of 2 to 3 years of experience in selling medical devices or medical equipment is required. The position is based in Casablanca with regular field travel.</p><br><br><p>Reporting to the sales department, your mission will be to promote the devices and solutions distributed by LONGEVITEK to healthcare professionals.</p><br><br><p>The position requires an active presence in the field, a good understanding of the medical sector, the ability to explain technical equipment, and the aptitude to build trusting relationships with doctors, clinic managers, buyers, and decision-makers in the health sector.</p><br><br><p>Main missions</p><br><br><p>You will be responsible for:</p><br><br><p>* Prospecting new clients: doctors, private clinics, medical practices, specialized centers, hospitals, and healthcare facilities.<br>* Presenting LONGEVITEK's medical devices and solutions professionally, clearly, and in compliance.<br>* Organizing regular field visits to healthcare professionals.<br>* Conducting product demonstrations, in coordination with the technical or medical team if necessary.<br>* Identifying the needs of doctors and healthcare facilities to propose suitable solutions.<br>* Developing and retaining a client portfolio.<br>* Following up on prospects, quotes, sales calls, and orders.<br>* Participating in the organization of training sessions, presentations, medical events, workshops, and conferences.<br>* Communicating field information: client needs, objections, competition, and market trends.<br>* Achieving sales targets set by management.<br>* Representing LONGEVITEK's image with seriousness, rigor, and professionalism.</p><br><br> <br> <br> Required profile : <p>We are looking for a serious, autonomous, and results-oriented field profile with real experience in the medical sector.</p><br><br><p>The candidate must have:</p><br><br><p>* A minimum of 2 to 3 years of experience in the sale of medical devices, medical equipment, or medical technologies.<br>* Good knowledge of the healthcare sector in Morocco.<br>* Proven experience in visits to doctors, clinics, medical practices, or hospitals.<br>* The ability to understand and present technical medical equipment.<br>* Good communication skills with healthcare professionals.<br>* Good negotiation and sales follow-up skills.<br>* An excellent presentation and professional demeanor.<br>* Good command of French and Arabic.<br>* Proficiency in basic office tools: email, Excel, CRM, or sales reporting.<br>* A B driving license. Field mobility is essential.</p><br><br><p>Experience in promoting medical devices is essential; the candidate must have a real ability to sell or promote medical devices and technical equipment.</p><br><br><p>Expected skills</p><br><br><p>* Field sales prospecting.<br>* B2B sales in the medical sector.<br>* Presentation and demonstration of medical devices.<br>* Client portfolio management.<br>* Sales negotiation.<br>* Follow-up of quotes, calls, and orders.<br>* Regular reporting to management.<br>* Good understanding of decision-making processes in clinics, medical practices, and healthcare facilities.</p><br><br><p>Personal qualities</p><br><br><p>* Seriousness and rigor.<br>* Autonomy in the field.<br>* Good listening skills.<br>* Ability to persuade without excessive discourse.<br>* Professional presentation.<br>* Sense of organization.<br>* Perseverance.<br>* Respect for medical ethics and confidentiality.<br>* Ability to build trust with healthcare professionals.</p><br><br> <br><br> </div>

<p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">As part of our business development, we are looking for a Senior COBOL Software Engineer to join our teams and work on high-value, strategic projects. You will work in a complex mainframe environment and participate in the development, maintenance, and optimization of critical applications supporting our clients' business activities.</font></font></p><p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;"><b>Your Mission</b></font></font></p><ul><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Design, develop and maintain COBOL applications within Mainframe equipment.</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Carry out technical developments and upgrades while respecting quality and performance standards.</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Analyze business needs and propose solutions tailored to functional and technical challenges.</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Participate in the testing, acceptance and production phases.</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Provide corrective and evolutionary maintenance for existing applications.</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">To intervene in production incidents and contribute to their resolution.</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Collaborating with business teams, functional analysts and various technical teams to ensure a high level of service quality.</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Write and maintain the technical documentation associated with the developments carried out.</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Contribute to the continuous improvement of application processes, performance and reliability.</font></font></li></ul><p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Your Profile</font></font></p><ul><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Master's degree (Bac+5) in Computer Science or equivalent.</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Significant experience in COBOL development.</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Good command of IBM Mainframe (z/OS) environments.</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Solid knowledge of JCL, DB2 and CICS.</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Ability to analyze complex problems and propose sustainable solutions.</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Good interpersonal skills, autonomy and team spirit.</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Experience in the banking, insurance or financial services sectors is an asset.</font></font></li></ul><p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Some reasons to join us</font></font></p><ul><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Quality of life at work: Possibility of teleworking in Morocco as well as internationally and autonomy in the organization of your daily life, hybrid missions according to your preferences.</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Continuous learning: access to training and certifications dedicated to your technology, personalized support and structured integration path.</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Diverse projects and strong impact: work with major clients in diverse sectors with stimulating business and technological challenges.</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Expertise ecosystem: benefit from personalized technical support and active integration into our professional communities.</font></font></li></ul><p><strong>Desired Candidate Profile</strong></p><p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Master's degree (Bac+5) in Computer Science or equivalent. Significant experience in COBOL development. Strong command of IBM Mainframe environments (z/OS). Solid knowledge of JCL, DB2, and CICS. Ability to analyze complex problems and propose sustainable solutions. Excellent interpersonal skills, autonomy, and a team player. Experience in the banking, insurance, or financial services sectors is a plus.</font></font></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><strong>Activities</strong> <div> <div> <p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Description: </font></font><br><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;"> Experience an extraordinary and unique adventure within a large industrial group, with the agility and autonomy of an SME. </font></font></p> <p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Contract type: Local; Fixed-term contract</font></font></p> <p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Your function</font></font></p> <p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">The Machinist participates in the launch/start-up of a 5-axis machining machine by taking charge of production programs (tooling preparation, CNC programs, machining).</font></font></p> <p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">As a Machinist, your responsibilities will be as follows*:</font></font></p> <p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Preparation of machining operations: </font></font><br><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">- Perform tests, adjust spindle settings and tooling according to the different axes at the start of the shift. </font></font><br><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">- Respect the choice of cutting tools and the change frequency to produce the desired part according to the standards for each program. </font></font><br><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Execution of machining operations: </font></font><br><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">- Execute and follow the machining program according to the standards for each program. </font></font><br><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">- Deburr machined parts according to the standards for each program. </font></font><br><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">- Ensure and check the conformity of machined/deburred parts before proceeding with the manufacturing flow. </font></font><br><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Maintenance and upkeep: </font></font><br><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">- Perform and ensure first-level maintenance of the machining center at the start of the shift. </font></font><br><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">- Alert the supervisor/maintenance department in case of machine malfunction. </font></font><br><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">- Participate in resolving technical/mechanical problems with the machine. </font></font><br><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">- Ensure the conformity of equipment (handling equipment, machines, tools, tooling, measuring instruments, etc.). </font></font><br><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Documentation and communication: </font></font><br><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">- Adhere to the production schedule and the batch composition box standard (KANBAN). </font></font><br><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">- Propose continuous improvement strategies to optimize the machining process. </font></font><br><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">- Carry out all tasks within the scope of their duties or as requested by their supervisor. </font></font><br><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Organization and safety: </font></font><br><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">- Maintain organization/5S at the workstation and in the tooling storage area. </font></font><br><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">- Ensure the proper use of handling/lifting equipment.</font></font></p> <p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">*Non-exhaustive list</font></font></p> <p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Skills and knowledge required</font></font></p> <p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;"> Having a background in Production Engineering / Computerized Mechanical Engineering or Machining</font></font></p> <p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;"> A maximum of 3 years' experience in a similar position is required; experience in aeronautics will be required.</font></font></p> <p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;"> Autonomy in operating machines</font></font></p> <p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Your interpersonal skills, your curiosity, but also your ability to be proactive and to be oriented towards innovation will allow you to carry out your missions successfully and to thrive in this position.</font></font></p> <p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">You will be working in a dynamic and growing environment.</font></font></p> <p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">You will benefit from the agility and flexibility of an SME combined with the solidity and resources of an international group that has existed for 170 years.</font></font></p> <p><br></p></div></div><div><div><div> </div></div></div></div></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job : <p>We favor candidates who have already worked on construction projects, particularly in one of the following roles:</p><br><br><ul><li><strong>Sales Engineer in construction materials;</strong></li><li><strong>Design Office Engineer;</strong></li><li><strong>Project Engineer.</strong></li></ul><p><strong>Responsibilities:</strong></p><br><br><ul><li>Develop and maintain relationships with construction companies, design offices, and architects.</li><li>Promote the company's technical systems and solutions.</li><li>Analyze technical specifications, bills of quantities, and project plans to identify commercial opportunities.</li><li>Actively prospect for new projects, convert prospects into clients, and secure orders to achieve sales targets.</li><li>Ensure follow-up of technical files submitted for approval, approvals, and orders related to projects.</li><li>Coordinate actions with internal technical and logistics teams.</li></ul> <br> <br> Required profile : <ul><li>Bachelor's degree (Bac+3 or equivalent) minimum in civil engineering, architecture, or construction engineering.</li><li>3 to 5 years of professional experience.</li><li>Experience in liaising with design offices, construction companies, and architects.</li><li>Ability to understand and analyze technical specifications, plans, and bills of quantities.</li></ul><p><strong>Appreciated assets:</strong></p><br><br><ul><li>Experience in dry construction systems, ceilings, partitions, or finishing materials.</li><li>Previous experience in technical sales or business development.</li><li>Professional network with design offices, architects, or construction companies in Morocco.</li><li>Excellent command of English or literary Arabic.</li></ul> <br><br> </div>